raysan5
9年前
6個のファイルの変更、478行の追加、396行の削除
分割表示
差分オプション
-
+2 -2src/audio.c
-
+4 -0src/raylib.h
-
+68 -1src/rlgl.c
-
+1 -386src/stb_vorbis.c
-
+386 -0src/stb_vorbis.h
-
+17 -7src/textures.c
+ 2
- 2
src/audio.c
ファイルの表示
+ 4
- 0
src/raylib.h
ファイルの表示
+ 68
- 1
src/rlgl.c
ファイルの表示
+ 1
- 386
src/stb_vorbis.c
ファイルの表示
+ 386
- 0
src/stb_vorbis.h
ファイルの表示
| @ -0,0 +1,386 @@ | |||
| // Ogg Vorbis audio decoder - v1.05 - public domain | |||
| // http://nothings.org/stb_vorbis/ | |||
| // | |||
| // Written by Sean Barrett in 2007, last updated in 2014 | |||
| // Sponsored by RAD Game Tools. | |||
| // | |||
| // Placed in the public domain April 2007 by the author: no copyright | |||
| // is claimed, and you may use it for any purpose you like. | |||
| // | |||
| // No warranty for any purpose is expressed or implied by the author (nor | |||
| // by RAD Game Tools). Report bugs and send enhancements to the author. | |||
| // | |||
| // Limitations: | |||
| // | |||
| // - seeking not supported except manually via PUSHDATA api | |||
| // - floor 0 not supported (used in old ogg vorbis files pre-2004) | |||
| // - lossless sample-truncation at beginning ignored | |||
| // - cannot concatenate multiple vorbis streams | |||
| // - sample positions are 32-bit, limiting seekable 192Khz | |||
| // files to around 6 hours (Ogg supports 64-bit) | |||
| // | |||
| // Bugfix/warning contributors: | |||
| // Terje Mathisen Niklas Frykholm Andy Hill | |||
| // Casey Muratori John Bolton Gargaj | |||
| // Laurent Gomila Marc LeBlanc Ronny Chevalier | |||
| // Bernhard Wodo Evan Balster "alxprd"@github | |||
| // Tom Beaumont Ingo Leitgeb Nicolas Guillemot | |||
| // (If you reported a bug but do not appear in this list, it is because | |||
| // someone else reported the bug before you. There were too many of you to | |||
| // list them all because I was lax about updating for a long time, sorry.) | |||
| // | |||
| // Partial history: | |||
| // 1.05 - 2015/04/19 - don't define __forceinline if it's redundant | |||
| // 1.04 - 2014/08/27 - fix missing const-correct case in API | |||
| // 1.03 - 2014/08/07 - warning fixes | |||
| // 1.02 - 2014/07/09 - declare qsort comparison as explicitly _cdecl in Windows | |||
| // 1.01 - 2014/06/18 - fix stb_vorbis_get_samples_float (interleaved was correct) | |||
| // 1.0 - 2014/05/26 - fix memory leaks; fix warnings; fix bugs in >2-channel; | |||
| // (API change) report sample rate for decode-full-file funcs | |||
| // 0.99996 - - bracket #include <malloc.h> for macintosh compilation | |||
| // 0.99995 - - avoid alias-optimization issue in float-to-int conversion | |||
| // | |||
| // See end of file for full version history. | |||
| ////////////////////////////////////////////////////////////////////////////// | |||
| // | |||
| // HEADER BEGINS HERE | |||
| // | |||
| #ifndef STB_VORBIS_INCLUDE_STB_VORBIS_H | |||
| #define STB_VORBIS_INCLUDE_STB_VORBIS_H | |||
| #if defined(STB_VORBIS_NO_CRT) && !defined(STB_VORBIS_NO_STDIO) | |||
| #define STB_VORBIS_NO_STDIO 1 | |||
| #endif | |||
| #ifndef STB_VORBIS_NO_STDIO | |||
| #include <stdio.h> | |||
| #endif | |||
| // NOTE: Added to work with raylib on Android | |||
| #if defined(PLATFORM_ANDROID) | |||
| #include "utils.h" // Android fopen function map | |||
| #endif | |||
| // RaySan: Added for Linux | |||
| #ifdef __linux | |||
| #include <alloca.h> | |||
| #endif | |||
| #ifdef __cplusplus | |||
| extern "C" { | |||
| #endif | |||
| /////////// THREAD SAFETY | |||
| // Individual stb_vorbis* handles are not thread-safe; you cannot decode from | |||
| // them from multiple threads at the same time. However, you can have multiple | |||
| // stb_vorbis* handles and decode from them independently in multiple thrads. | |||
| /////////// MEMORY ALLOCATION | |||
| // normally stb_vorbis uses malloc() to allocate memory at startup, | |||
| // and alloca() to allocate temporary memory during a frame on the | |||
| // stack. (Memory consumption will depend on the amount of setup | |||
| // data in the file and how you set the compile flags for speed | |||
| // vs. size. In my test files the maximal-size usage is ~150KB.) | |||
| // | |||
| // You can modify the wrapper functions in the source (setup_malloc, | |||
| // setup_temp_malloc, temp_malloc) to change this behavior, or you | |||
| // can use a simpler allocation model: you pass in a buffer from | |||
| // which stb_vorbis will allocate _all_ its memory (including the | |||
| // temp memory). "open" may fail with a VORBIS_outofmem if you | |||
| // do not pass in enough data; there is no way to determine how | |||
| // much you do need except to succeed (at which point you can | |||
| // query get_info to find the exact amount required. yes I know | |||
| // this is lame). | |||
| // | |||
| // If you pass in a non-NULL buffer of the type below, allocation | |||
| // will occur from it as described above. Otherwise just pass NULL | |||
| // to use malloc()/alloca() | |||
| typedef struct | |||
| { | |||
| char *alloc_buffer; | |||
| int alloc_buffer_length_in_bytes; | |||
| } stb_vorbis_alloc; | |||
| /////////// FUNCTIONS USEABLE WITH ALL INPUT MODES | |||
| typedef struct stb_vorbis stb_vorbis; | |||
| typedef struct | |||
| { | |||
| unsigned int sample_rate; | |||
| int channels; | |||
| unsigned int setup_memory_required; | |||
| unsigned int setup_temp_memory_required; | |||
| unsigned int temp_memory_required; | |||
| int max_frame_size; | |||
| } stb_vorbis_info; | |||
| // get general information about the file | |||
| extern stb_vorbis_info stb_vorbis_get_info(stb_vorbis *f); | |||
| // get the last error detected (clears it, too) | |||
| extern int stb_vorbis_get_error(stb_vorbis *f); | |||
| // close an ogg vorbis file and free all memory in use | |||
| extern void stb_vorbis_close(stb_vorbis *f); | |||
| // this function returns the offset (in samples) from the beginning of the | |||
| // file that will be returned by the next decode, if it is known, or -1 | |||
| // otherwise. after a flush_pushdata() call, this may take a while before | |||
| // it becomes valid again. | |||
| // NOT WORKING YET after a seek with PULLDATA API | |||
| extern int stb_vorbis_get_sample_offset(stb_vorbis *f); | |||
| // returns the current seek point within the file, or offset from the beginning | |||
| // of the memory buffer. In pushdata mode it returns 0. | |||
| extern unsigned int stb_vorbis_get_file_offset(stb_vorbis *f); | |||
| /////////// PUSHDATA API | |||
| #ifndef STB_VORBIS_NO_PUSHDATA_API | |||
| // this API allows you to get blocks of data from any source and hand | |||
| // them to stb_vorbis. you have to buffer them; stb_vorbis will tell | |||
| // you how much it used, and you have to give it the rest next time; | |||
| // and stb_vorbis may not have enough data to work with and you will | |||
| // need to give it the same data again PLUS more. Note that the Vorbis | |||
| // specification does not bound the size of an individual frame. | |||
| extern stb_vorbis *stb_vorbis_open_pushdata( | |||
| unsigned char *datablock, int datablock_length_in_bytes, | |||
| int *datablock_memory_consumed_in_bytes, | |||
| int *error, | |||
| stb_vorbis_alloc *alloc_buffer); | |||
| // create a vorbis decoder by passing in the initial data block containing | |||
| // the ogg&vorbis headers (you don't need to do parse them, just provide | |||
| // the first N bytes of the file--you're told if it's not enough, see below) | |||
| // on success, returns an stb_vorbis *, does not set error, returns the amount of | |||
| // data parsed/consumed on this call in *datablock_memory_consumed_in_bytes; | |||
| // on failure, returns NULL on error and sets *error, does not change *datablock_memory_consumed | |||
| // if returns NULL and *error is VORBIS_need_more_data, then the input block was | |||
| // incomplete and you need to pass in a larger block from the start of the file | |||
| extern int stb_vorbis_decode_frame_pushdata( | |||
| stb_vorbis *f, unsigned char *datablock, int datablock_length_in_bytes, | |||
| int *channels, // place to write number of float * buffers | |||
| float ***output, // place to write float ** array of float * buffers | |||
| int *samples // place to write number of output samples | |||
| ); | |||
| // decode a frame of audio sample data if possible from the passed-in data block | |||
| // | |||
| // return value: number of bytes we used from datablock | |||
| // | |||
| // possible cases: | |||
| // 0 bytes used, 0 samples output (need more data) | |||
| // N bytes used, 0 samples output (resynching the stream, keep going) | |||
| // N bytes used, M samples output (one frame of data) | |||
| // note that after opening a file, you will ALWAYS get one N-bytes,0-sample | |||
| // frame, because Vorbis always "discards" the first frame. | |||
| // | |||
| // Note that on resynch, stb_vorbis will rarely consume all of the buffer, | |||
| // instead only datablock_length_in_bytes-3 or less. This is because it wants | |||
| // to avoid missing parts of a page header if they cross a datablock boundary, | |||
| // without writing state-machiney code to record a partial detection. | |||
| // | |||
| // The number of channels returned are stored in *channels (which can be | |||
| // NULL--it is always the same as the number of channels reported by | |||
| // get_info). *output will contain an array of float* buffers, one per | |||
| // channel. In other words, (*output)[0][0] contains the first sample from | |||
| // the first channel, and (*output)[1][0] contains the first sample from | |||
| // the second channel. | |||
| extern void stb_vorbis_flush_pushdata(stb_vorbis *f); | |||
| // inform stb_vorbis that your next datablock will not be contiguous with | |||
| // previous ones (e.g. you've seeked in the data); future attempts to decode | |||
| // frames will cause stb_vorbis to resynchronize (as noted above), and | |||
| // once it sees a valid Ogg page (typically 4-8KB, as large as 64KB), it | |||
| // will begin decoding the _next_ frame. | |||
| // | |||
| // if you want to seek using pushdata, you need to seek in your file, then | |||
| // call stb_vorbis_flush_pushdata(), then start calling decoding, then once | |||
| // decoding is returning you data, call stb_vorbis_get_sample_offset, and | |||
| // if you don't like the result, seek your file again and repeat. | |||
| #endif | |||
| ////////// PULLING INPUT API | |||
| #ifndef STB_VORBIS_NO_PULLDATA_API | |||
| // This API assumes stb_vorbis is allowed to pull data from a source-- | |||
| // either a block of memory containing the _entire_ vorbis stream, or a | |||
| // FILE * that you or it create, or possibly some other reading mechanism | |||
| // if you go modify the source to replace the FILE * case with some kind | |||
| // of callback to your code. (But if you don't support seeking, you may | |||
| // just want to go ahead and use pushdata.) | |||
| #if !defined(STB_VORBIS_NO_STDIO) && !defined(STB_VORBIS_NO_INTEGER_CONVERSION) | |||
| extern int stb_vorbis_decode_filename(const char *filename, int *channels, int *sample_rate, short **output); | |||
| #endif | |||
| #if !defined(STB_VORBIS_NO_INTEGER_CONVERSION) | |||
| extern int stb_vorbis_decode_memory(const unsigned char *mem, int len, int *channels, int *sample_rate, short **output); | |||
| #endif | |||
| // decode an entire file and output the data interleaved into a malloc()ed | |||
| // buffer stored in *output. The return value is the number of samples | |||
| // decoded, or -1 if the file could not be opened or was not an ogg vorbis file. | |||
| // When you're done with it, just free() the pointer returned in *output. | |||
| extern stb_vorbis * stb_vorbis_open_memory(const unsigned char *data, int len, | |||
| int *error, stb_vorbis_alloc *alloc_buffer); | |||
| // create an ogg vorbis decoder from an ogg vorbis stream in memory (note | |||
| // this must be the entire stream!). on failure, returns NULL and sets *error | |||
| #ifndef STB_VORBIS_NO_STDIO | |||
| extern stb_vorbis * stb_vorbis_open_filename(const char *filename, | |||
| int *error, stb_vorbis_alloc *alloc_buffer); | |||
| // create an ogg vorbis decoder from a filename via fopen(). on failure, | |||
| // returns NULL and sets *error (possibly to VORBIS_file_open_failure). | |||
| extern stb_vorbis * stb_vorbis_open_file(FILE *f, int close_handle_on_close, | |||
| int *error, stb_vorbis_alloc *alloc_buffer); | |||
| // create an ogg vorbis decoder from an open FILE *, looking for a stream at | |||
| // the _current_ seek point (ftell). on failure, returns NULL and sets *error. | |||
| // note that stb_vorbis must "own" this stream; if you seek it in between | |||
| // calls to stb_vorbis, it will become confused. Morever, if you attempt to | |||
| // perform stb_vorbis_seek_*() operations on this file, it will assume it | |||
| // owns the _entire_ rest of the file after the start point. Use the next | |||
| // function, stb_vorbis_open_file_section(), to limit it. | |||
| extern stb_vorbis * stb_vorbis_open_file_section(FILE *f, int close_handle_on_close, | |||
| int *error, stb_vorbis_alloc *alloc_buffer, unsigned int len); | |||
| // create an ogg vorbis decoder from an open FILE *, looking for a stream at | |||
| // the _current_ seek point (ftell); the stream will be of length 'len' bytes. | |||
| // on failure, returns NULL and sets *error. note that stb_vorbis must "own" | |||
| // this stream; if you seek it in between calls to stb_vorbis, it will become | |||
| // confused. | |||
| #endif | |||
| extern int stb_vorbis_seek_frame(stb_vorbis *f, unsigned int sample_number); | |||
| extern int stb_vorbis_seek(stb_vorbis *f, unsigned int sample_number); | |||
| // NOT WORKING YET | |||
| // these functions seek in the Vorbis file to (approximately) 'sample_number'. | |||
| // after calling seek_frame(), the next call to get_frame_*() will include | |||
| // the specified sample. after calling stb_vorbis_seek(), the next call to | |||
| // stb_vorbis_get_samples_* will start with the specified sample. If you | |||
| // do not need to seek to EXACTLY the target sample when using get_samples_*, | |||
| // you can also use seek_frame(). | |||
| extern void stb_vorbis_seek_start(stb_vorbis *f); | |||
| // this function is equivalent to stb_vorbis_seek(f,0), but it | |||
| // actually works | |||
| extern unsigned int stb_vorbis_stream_length_in_samples(stb_vorbis *f); | |||
| extern float stb_vorbis_stream_length_in_seconds(stb_vorbis *f); | |||
| // these functions return the total length of the vorbis stream | |||
| extern int stb_vorbis_get_frame_float(stb_vorbis *f, int *channels, float ***output); | |||
| // decode the next frame and return the number of samples. the number of | |||
| // channels returned are stored in *channels (which can be NULL--it is always | |||
| // the same as the number of channels reported by get_info). *output will | |||
| // contain an array of float* buffers, one per channel. These outputs will | |||
| // be overwritten on the next call to stb_vorbis_get_frame_*. | |||
| // | |||
| // You generally should not intermix calls to stb_vorbis_get_frame_*() | |||
| // and stb_vorbis_get_samples_*(), since the latter calls the former. | |||
| #ifndef STB_VORBIS_NO_INTEGER_CONVERSION | |||
| extern int stb_vorbis_get_frame_short_interleaved(stb_vorbis *f, int num_c, short *buffer, int num_shorts); | |||
| extern int stb_vorbis_get_frame_short (stb_vorbis *f, int num_c, short **buffer, int num_samples); | |||
| #endif | |||
| // decode the next frame and return the number of samples per channel. the | |||
| // data is coerced to the number of channels you request according to the | |||
| // channel coercion rules (see below). You must pass in the size of your | |||
| // buffer(s) so that stb_vorbis will not overwrite the end of the buffer. | |||
| // The maximum buffer size needed can be gotten from get_info(); however, | |||
| // the Vorbis I specification implies an absolute maximum of 4096 samples | |||
| // per channel. Note that for interleaved data, you pass in the number of | |||
| // shorts (the size of your array), but the return value is the number of | |||
| // samples per channel, not the total number of samples. | |||
| // Channel coercion rules: | |||
| // Let M be the number of channels requested, and N the number of channels present, | |||
| // and Cn be the nth channel; let stereo L be the sum of all L and center channels, | |||
| // and stereo R be the sum of all R and center channels (channel assignment from the | |||
| // vorbis spec). | |||
| // M N output | |||
| // 1 k sum(Ck) for all k | |||
| // 2 * stereo L, stereo R | |||
| // k l k > l, the first l channels, then 0s | |||
| // k l k <= l, the first k channels | |||
| // Note that this is not _good_ surround etc. mixing at all! It's just so | |||
| // you get something useful. | |||
| extern int stb_vorbis_get_samples_float_interleaved(stb_vorbis *f, int channels, float *buffer, int num_floats); | |||
| extern int stb_vorbis_get_samples_float(stb_vorbis *f, int channels, float **buffer, int num_samples); | |||
| // gets num_samples samples, not necessarily on a frame boundary--this requires | |||
| // buffering so you have to supply the buffers. DOES NOT APPLY THE COERCION RULES. | |||
| // Returns the number of samples stored per channel; it may be less than requested | |||
| // at the end of the file. If there are no more samples in the file, returns 0. | |||
| #ifndef STB_VORBIS_NO_INTEGER_CONVERSION | |||
| extern int stb_vorbis_get_samples_short_interleaved(stb_vorbis *f, int channels, short *buffer, int num_shorts); | |||
| extern int stb_vorbis_get_samples_short(stb_vorbis *f, int channels, short **buffer, int num_samples); | |||
| #endif | |||
| // gets num_samples samples, not necessarily on a frame boundary--this requires | |||
| // buffering so you have to supply the buffers. Applies the coercion rules above | |||
| // to produce 'channels' channels. Returns the number of samples stored per channel; | |||
| // it may be less than requested at the end of the file. If there are no more | |||
| // samples in the file, returns 0. | |||
| #endif | |||
| //////// ERROR CODES | |||
| enum STBVorbisError | |||
| { | |||
| VORBIS__no_error, | |||
| VORBIS_need_more_data=1, // not a real error | |||
| VORBIS_invalid_api_mixing, // can't mix API modes | |||
| VORBIS_outofmem, // not enough memory | |||
| VORBIS_feature_not_supported, // uses floor 0 | |||
| VORBIS_too_many_channels, // STB_VORBIS_MAX_CHANNELS is too small | |||
| VORBIS_file_open_failure, // fopen() failed | |||
| VORBIS_seek_without_length, // can't seek in unknown-length file | |||
| VORBIS_unexpected_eof=10, // file is truncated? | |||
| VORBIS_seek_invalid, // seek past EOF | |||
| // decoding errors (corrupt/invalid stream) -- you probably | |||
| // don't care about the exact details of these | |||
| // vorbis errors: | |||
| VORBIS_invalid_setup=20, | |||
| VORBIS_invalid_stream, | |||
| // ogg errors: | |||
| VORBIS_missing_capture_pattern=30, | |||
| VORBIS_invalid_stream_structure_version, | |||
| VORBIS_continued_packet_flag_invalid, | |||
| VORBIS_incorrect_stream_serial_number, | |||
| VORBIS_invalid_first_page, | |||
| VORBIS_bad_packet_type, | |||
| VORBIS_cant_find_last_page, | |||
| VORBIS_seek_failed, | |||
| }; | |||
| #ifdef __cplusplus | |||
| } | |||
| #endif | |||
| #endif // STB_VORBIS_INCLUDE_STB_VORBIS_H | |||
| // | |||
| // HEADER ENDS HERE | |||
| // | |||
| ////////////////////////////////////////////////////////////////////////////// | |||