klimi
/
dotfiles


								This is magit.info, produced by makeinfo version 6.5 from magit.texi.


								     Copyright (C) 2015-2019 Jonas Bernoulli <jonas@bernoul.li>


								     You can redistribute this document and/or modify it under the terms

								     of the GNU General Public License as published by the Free Software

								     Foundation, either version 3 of the License, or (at your option)

								     any later version.


								     This document is distributed in the hope that it will be useful,

								     but WITHOUT ANY WARRANTY; without even the implied warranty of

								     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

								     General Public License for more details.


								INFO-DIR-SECTION Emacs

								START-INFO-DIR-ENTRY

								* Magit: (magit).       Using Git from Emacs with Magit.

								END-INFO-DIR-ENTRY


								File: magit.info,  Node: Wip Graph,  Next: Legacy Wip Modes,  Up: Wip Modes


								8.7.1 Wip Graph

								---------------


								 -- User Option: magit-wip-merge-branch


								     This option controls whether the current branch is merged into the

								     wip refs after a new commit was created on the branch.


								     If non-nil and the current branch has new commits, then it is

								     merged into the wip ref before creating a new wip commit.  This

								     makes it easier to inspect wip history and the wip commits are

								     never garbage collected.


								     If nil and the current branch has new commits, then the wip ref is

								     reset to the tip of the branch before creating a new wip commit.

								     With this setting wip commits are eventually garbage collected.


								   When ‘magit-wip-merge-branch’ is ‘t’, then the history looks like

								this:


								       *--*--*--*--*--*       refs/wip/index/refs/heads/master

								      /     /     /

								     A-----B-----C            refs/heads/master


								   When ‘magit-wip-merge-branch’ is ‘nil’, then creating a commit on the

								real branch and then making a change causes the wip refs to be recreated

								to fork from the new commit.  But the old commits on the wip refs are

								not lost.  They are still available from the reflog.  To make it easier

								to see when the fork point of a wip ref was changed, an additional

								commit with the message "restart autosaving" is created on it (‘xxO’

								commits below are such boundary commits).


								   Starting with


								           BI0---BI1    refs/wip/index/refs/heads/master

								          /

								     A---B              refs/heads/master

								          \

								           BW0---BW1    refs/wip/wtree/refs/heads/master


								   and committing the staged changes and editing and saving a file would

								result in


								           BI0---BI1        refs/wip/index/refs/heads/master

								          /

								     A---B---C              refs/heads/master

								          \   \

								           \   CW0---CW1    refs/wip/wtree/refs/heads/master

								            \

								             BW0---BW1      refs/wip/wtree/refs/heads/master@{2}


								   The fork-point of the index wip ref is not changed until some change

								is being staged.  Likewise just checking out a branch or creating a

								commit does not change the fork-point of the working tree wip ref.  The

								fork-points are not adjusted until there actually is a change that

								should be committed to the respective wip ref.


								File: magit.info,  Node: Legacy Wip Modes,  Prev: Wip Graph,  Up: Wip Modes


								8.7.2 Legacy Wip Modes

								----------------------


								It is recommended that you use the mode ‘magit-wip-mode’ (which see) and

								ignore the existence of the following modes, which are preserved for

								historic reasons.


								   Setting the following variables directly does not take effect; either

								use the Custom interface to do so or call the respective mode functions.


								 -- User Option: magit-wip-after-save-mode


								     When this mode is enabled, then saving a buffer that visits a file

								     tracked in a Git repository causes its current state to be

								     committed to the working tree wip ref for the current branch.


								 -- User Option: magit-wip-after-apply-mode


								     When this mode is enabled, then applying (i.e.  staging, unstaging,

								     discarding, reversing, and regularly applying) a change to a file

								     tracked in a Git repository causes its current state to be

								     committed to the index and/or working tree wip refs for the current

								     branch.


								   If you only ever edit files using Emacs and only ever interact with

								Git using Magit, then the above two modes should be enough to protect

								each and every change from accidental loss.  In practice nobody does

								that.  Two additional modes exists that do commit to the wip refs before

								making changes that could cause the loss of earlier changes.


								 -- User Option: magit-wip-before-change-mode


								     When this mode is enabled, then certain commands commit the

								     existing changes to the files they are about to make changes to.


								 -- User Option: magit-wip-initial-backup-mode


								     When this mode is enabled, then the current version of a file is

								     committed to the worktree wip ref before the buffer visiting that

								     file is saved for the first time since the buffer was created.


								     This backs up the same version of the file that ‘backup-buffer’

								     would save.  While ‘backup-buffer’ uses a backup file, this mode

								     uses the same worktree wip ref as used by the other Magit Wip

								     modes.  Like ‘backup-buffer’, it only does this once; unless you

								     kill the buffer and visit the file again only one backup will be

								     created per Emacs session.


								     This mode ignores the variables that affect ‘backup-buffer’ and can

								     be used along-side that function, which is recommended because it

								     only backs up files that are tracked in a Git repository.


								 -- User Option: magit-wip-after-save-local-mode-lighter


								     Mode-line lighter for ‘magit-wip-after-save-local-mode’.


								 -- User Option: magit-wip-after-apply-mode-lighter


								     Mode-line lighter for ‘magit-wip-after-apply-mode’.


								 -- User Option: magit-wip-before-change-mode-lighter


								     Mode-line lighter for ‘magit-wip-before-change-mode’.


								 -- User Option: magit-wip-initial-backup-mode-lighter


								     Mode-line lighter for ‘magit-wip-initial-backup-mode’.


								File: magit.info,  Node: Minor Mode for Buffers Visiting Files,  Next: Minor Mode for Buffers Visiting Blobs,  Prev: Wip Modes,  Up: Miscellaneous


								8.8 Minor Mode for Buffers Visiting Files

								=========================================


								The minor-mode ‘magit-file-mode’ enables certain Magit features in

								file-visiting buffers belonging to a Git repository.  The globalized

								variant ‘global-magit-file-mode’ enables the local mode in all such

								buffers.  It is enabled by default.  Currently the local mode only

								establishes a few key bindings, but this might be extended in the

								future.


								 -- User Option: global-magit-file-mode


								     Whether to establish certain Magit key bindings in all

								     file-visiting buffers belonging to any Git repository.  This is

								     enabled by default.  This globalized mode turns on the local

								     minor-mode ‘magit-file-mode’ in all suitable buffers.


								 -- Variable: magit-file-mode-map


								     This keymap is used by the local minor-mode ‘magit-file-mode’ and

								     establishes the key bindings described below.


								     Note that the default binding for ‘magit-file-dispatch’ is very

								     cumbersome to use and that we recommend that you add a better

								     binding.


								     Instead of ‘C-c M-g’ I would have preferred to use ‘C-c g’ because

								     (1) it is similar to ‘C-x g’ (the recommended global binding for

								     ‘~magit-status’), (2) we cannot use ‘C-c C-g’ because we have been

								     recommending that that be bound to ‘magit-dispatch’ for a long

								     time, (3) we cannot use ‘C-x C-g’ because that is a convenient way

								     of aborting the incomplete key sequence ‘C-x’, and most importantly

								     (4) it would make it much easier to type the next key (a suffix

								     binding) because most of those are letters.


								     For example ‘C-c g b’ is much easier to type than ‘C-c M-g b’.  For

								     suffix bindings that use uppercase letters, the default is just

								     horrible—having to use e.g.  ‘C-c M-g B’ (‘Control+c Meta+g

								     Shift+b’) would drive anyone up the walls (or to Vim).


								     However ‘C-c LETTER’ bindings are reserved for users (see *note

								     (elisp)Key Binding Conventions::).  Packages are forbidden from

								     using those.  Doing so anyway is considered heresy.  Therefore if

								     you want a better binding, you have to add it yourself:


								          (define-key magit-file-mode-map

								            (kbd "C-c g") 'magit-file-dispatch)


								   The key bindings shown below assume that you have not improved the

								binding for ‘magit-file-dispatch’.


								‘C-c M-g’     (‘magit-file-dispatch’)


								     This transient prefix command binds the following suffix commands

								     and displays them in a temporary buffer until a suffix is invoked.


								‘C-c M-g s’     (‘magit-stage-file’)


								     Stage all changes to the file being visited in the current buffer.


								‘C-c M-g u’     (‘magit-unstage-file’)


								     Unstage all changes to the file being visited in the current

								     buffer.


								‘C-c M-g c’     (‘magit-commit’)


								     This transient prefix command binds the following suffix commands

								     along with the appropriate infix arguments and displays them in a

								     temporary buffer until a suffix is invoked.  See *note Initiating a

								     Commit::.


								‘C-c M-g D’     (‘magit-diff’)


								     This transient prefix command binds several diff suffix commands

								     and infix arguments and displays them in a temporary buffer until a

								     suffix is invoked.  See *note Diffing::.


								     This is the same command that ‘d’ is bound to in Magit buffers.  If

								     this command is invoked from a file-visiting buffer, then the

								     initial value of the option (‘--’) that limits the diff to certain

								     file(s) is set to the visited file.


								‘C-c M-g d’     (‘magit-diff-buffer-file’)


								     This command shows the diff for the file of blob that the current

								     buffer visits.


								 -- User Option: magit-diff-buffer-file-locked


								     This option controls whether ‘magit-diff-buffer-file’ uses a

								     dedicated buffer.  See *note Modes and Buffers::.


								‘C-c M-g L’     (‘magit-log’)


								     This transient prefix command binds several log suffix commands and

								     infix arguments and displays them in a temporary buffer until a

								     suffix is invoked.  See *note Logging::.


								     This is the same command that ‘l’ is bound to in Magit buffers.  If

								     this command is invoked from a file-visiting buffer, then the

								     initial value of the option (‘--’) that limits the log to certain

								     file(s) is set to the visited file.


								‘C-c M-g l’     (‘magit-log-buffer-file’)


								     This command shows the log for the file of blob that the current

								     buffer visits.  Renames are followed when a prefix argument is used

								     or when ‘--follow’ is an active log argument.  When the region is

								     active, the log is restricted to the selected line range.


								‘C-c M-g t’     (‘magit-log-trace-definition’)


								     This command shows the log for the definition at point.


								 -- User Option: magit-log-buffer-file-locked


								     This option controls whether ‘magit-log-buffer-file’ uses a

								     dedicated buffer.  See *note Modes and Buffers::.


								‘C-c M-g B’     (‘magit-blame’)


								     This transient prefix command binds all blaming suffix commands

								     along with the appropriate infix arguments and displays them in a

								     temporary buffer until a suffix is invoked.


								     For more information about this and the following commands also see

								     *note Blaming::.


								   In addition to the ‘magit-blame’ sub-transient, the dispatch

								transient also binds several blaming suffix commands directly.  See

								*note Blaming:: for information about those commands and bindings.


								‘C-c M-g e’     (‘magit-edit-line-commit’)


								     This command makes the commit editable that added the current line.


								     With a prefix argument it makes the commit editable that removes

								     the line, if any.  The commit is determined using ‘git blame’ and

								     made editable using ‘git rebase --interactive’ if it is reachable

								     from ‘HEAD’, or by checking out the commit (or a branch that points

								     at it) otherwise.


								‘C-c M-g p’     (‘magit-blob-previous’)


								     Visit the previous blob which modified the current file.


								   There are a few additional commands that operate on a single file but

								are not enabled in the file transient command by default:


								 -- Command: magit-file-rename


								     This command renames a file read from the user.


								 -- Command: magit-file-delete


								     This command deletes a file read from the user.


								 -- Command: magit-file-untrack


								     This command untracks a file read from the user.


								 -- Command: magit-file-checkout


								     This command updates a file in the working tree and index to the

								     contents from a revision.  Both the revision and file are read from

								     the user.


								   To enable them invoke the transient (‘C-c M-g’), enter "edit mode"

								(‘C-x l’), set the "transient level" (‘C-x l’ again), enter ‘5’, and

								leave edit mode (‘C-g’).  Also see *note (transient)Enabling and

								Disabling Suffixes::.


								File: magit.info,  Node: Minor Mode for Buffers Visiting Blobs,  Prev: Minor Mode for Buffers Visiting Files,  Up: Miscellaneous


								8.9 Minor Mode for Buffers Visiting Blobs

								=========================================


								The ‘magit-blob-mode’ enables certain Magit features in blob-visiting

								buffers.  Such buffers can be created using ‘magit-find-file’ and some

								of the commands mentioned below, which also take care of turning on this

								minor mode.  Currently this mode only establishes a few key bindings,

								but this might be extended.


								‘p’     (‘magit-blob-previous’)


								     Visit the previous blob which modified the current file.


								‘n’     (‘magit-blob-next’)


								     Visit the next blob which modified the current file.


								‘q’     (‘magit-kill-this-buffer’)


								     Kill the current buffer.


								File: magit.info,  Node: Customizing,  Next: Plumbing,  Prev: Miscellaneous,  Up: Top


								9 Customizing

								*************


								Both Git and Emacs are highly customizable.  Magit is both a Git

								porcelain as well as an Emacs package, so it makes sense to customize it

								using both Git variables as well as Emacs options.  However this

								flexibility doesn’t come without problems, including but not limited to

								the following.


								   • Some Git variables automatically have an effect in Magit without

								     requiring any explicit support.  Sometimes that is desirable - in

								     other cases, it breaks Magit.


								     When a certain Git setting breaks Magit but you want to keep using

								     that setting on the command line, then that can be accomplished by

								     overriding the value for Magit only by appending something like

								     ‘("-c" "some.variable=compatible-value")’ to

								     ‘magit-git-global-arguments’.


								   • Certain settings like ‘fetch.prune=true’ are respected by Magit

								     commands (because they simply call the respective Git command) but

								     their value is not reflected in the respective transient buffers.

								     In this case the ‘--prune’ argument in ‘magit-fetch’ might be

								     active or inactive, but that doesn’t keep the Git variable from

								     being honored by the suffix commands anyway.  So pruning might

								     happen despite the ‘--prune’ arguments being displayed in a way

								     that seems to indicate that no pruning will happen.


								   I intend to address these and similar issues in a future release.


								* Menu:


								* Per-Repository Configuration::

								* Essential Settings::


								File: magit.info,  Node: Per-Repository Configuration,  Next: Essential Settings,  Up: Customizing


								9.1 Per-Repository Configuration

								================================


								Magit can be configured on a per-repository level using both Git

								variables as well as Emacs options.


								   To set a Git variable for one repository only, simply set it in

								‘/path/to/repo/.git/config’ instead of ‘$HOME/.gitconfig’ or

								‘/etc/gitconfig’.  See *note (gitman)git-config::.


								   Similarly, Emacs options can be set for one repository only by

								editing ‘/path/to/repo/.dir-locals.el’.  See *note (emacs)Directory

								Variables::.  For example to disable automatic refreshes of

								file-visiting buffers in just one huge repository use this:


								   • ‘/path/to/huge/repo/.dir-locals.el’


								          ((nil . ((magit-refresh-buffers . nil))))


								   If you want to apply the same settings to several, but not all,

								repositories then keeping the repository-local config files in sync

								would quickly become annoying.  To avoid that you can create config

								files for certain classes of repositories (e.g.  "huge repositories")

								and then include those files in the per-repository config files.  For

								example:


								   • ‘/path/to/huge/repo/.git/config’


								          [include]

								                  path = /path/to/huge-gitconfig


								   • ‘/path/to/huge-gitconfig’


								          [status]

								                  showUntrackedFiles = no


								   • ‘$HOME/.emacs.d/init.el’


								          (dir-locals-set-class-variables 'huge-git-repository

								             '((nil . ((magit-refresh-buffers . nil)))))


								          (dir-locals-set-directory-class

								             "/path/to/huge/repo/" 'huge-git-repository)


								File: magit.info,  Node: Essential Settings,  Prev: Per-Repository Configuration,  Up: Customizing


								9.2 Essential Settings

								======================


								The next two sections list and discuss several variables that many users

								might want to customize, for safety and/or performance reasons.


								* Menu:


								* Safety::

								* Performance::


								File: magit.info,  Node: Safety,  Next: Performance,  Up: Essential Settings


								9.2.1 Safety

								------------


								This section discusses various variables that you might want to change

								(or *not* change) for safety reasons.


								   Git keeps *committed* changes around long enough for users to recover

								changes they have accidentally been deleted.  It does not do the same

								for *uncommitted* changes in the working tree and not even the index

								(the staging area).  Because Magit makes it so easy to modify

								uncommitted changes, it also makes it easy to shoot yourself in the foot

								in the process.  For that reason Magit provides three global modes that

								save *tracked* files to work-in-progress references after or before

								certain actions.  See *note Wip Modes::.


								   These modes are not enabled by default because of performance

								concerns.  Instead a lot of potentially destructive commands require

								confirmation every time they are used.  In many cases this can be

								disabled by adding a symbol to ‘magit-no-confirm’ (see *note Completion

								and Confirmation::).  If you enable the various wip modes then you

								should add ‘safe-with-wip’ to this list.


								   Similarly it isn’t necessary to require confirmation before moving a

								file to the system trash - if you trashed a file by mistake then you can

								recover it from the there.  Option ‘magit-delete-by-moving-to-trash’

								controls whether the system trash is used, which is the case by default.

								Nevertheless, ‘trash’ isn’t a member of ‘magit-no-confirm’ - you might

								want to change that.


								   By default buffers visiting files are automatically reverted when the

								visited file changes on disk.  This isn’t as risky as it might seem, but

								to make an informed decision you should see *note Risk of Reverting

								Automatically::.


								File: magit.info,  Node: Performance,  Prev: Safety,  Up: Essential Settings


								9.2.2 Performance

								-----------------


								After Magit has run ‘git’ for side-effects, it also refreshes the

								current Magit buffer and the respective status buffer.  This is

								necessary because otherwise outdated information might be displayed

								without the user noticing.  Magit buffers are updated by recreating

								their content from scratch, which makes updating simpler and less

								error-prone, but also more costly.  Keeping it simple and just

								re-creating everything from scratch is an old design decision and

								departing from that will require major refactoring.


								   I plan to do that in time for the next major release.  I also intend

								to create logs and diffs asynchronously, which should also help a lot

								but also requires major refactoring.


								   Meanwhile you can tell Magit to only automatically refresh the

								current Magit buffer, but not the status buffer.  If you do that, then

								the status buffer is only refreshed automatically if it is the current

								buffer.


								     (setq magit-refresh-status-buffer nil)


								   You should also check whether any third-party packages have added

								anything to ‘magit-refresh-buffer-hook’, ‘magit-status-refresh-hook’,

								‘magit-pre-refresh-hook’, and ‘magit-post-refresh-hook’.  If so, then

								check whether those additions impact performance significantly.  Setting

								‘magit-refresh-verbose’ and then inspecting the output in the

								‘*Messages*’ buffer, should help doing so.


								   Magit also reverts buffers for visited files located inside the

								current repository when the visited file changes on disk.  That is

								implemented on top of ‘auto-revert-mode’ from the built-in library

								‘autorevert’.  To figure out whether that impacts performance, check

								whether performance is significantly worse, when many buffers exist

								and/or when some buffers visit files using TRAMP.  If so, then this

								should help.


								     (setq auto-revert-buffer-list-filter

								           'magit-auto-revert-repository-buffer-p)


								   For alternative approaches see *note Automatic Reverting of

								File-Visiting Buffers::.


								   If you have enabled any features that are disabled by default, then

								you should check whether they impact performance significantly.  It’s

								likely that they were not enabled by default because it is known that

								they reduce performance at least in large repositories.


								   If performance is only slow inside certain unusually large

								repositories, then you might want to disable certain features on a

								per-repository or per-repository-class basis only.  See *note

								Per-Repository Configuration::.


								* Menu:


								* Microsoft Windows Performance::

								* MacOS Performance::


								Log Performance

								...............


								When showing logs, Magit limits the number of commits initially shown in

								the hope that this avoids unnecessary work.  When using ‘--graph’ is

								used, then this unfortunately does not have the desired effect for large

								histories.  Junio, Git’s maintainer, said on the git mailing list

								(<http://www.spinics.net/lists/git/msg232230.html>): "‘--graph’ wants to

								compute the whole history and the max-count only affects the output

								phase after ‘--graph’ does its computation".


								   In other words, it’s not that Git is slow at outputting the

								differences, or that Magit is slow at parsing the output - the problem

								is that Git first goes outside and has a smoke.


								   We actually work around this issue by limiting the number of commits

								not only by using ‘-<N>’ but by also using a range.  But unfortunately

								that’s not always possible.


								   When more than a few thousand commits are shown, then the use of

								‘--graph’ can slow things down.


								   Using ‘--color --graph’ is even slower.  Magit uses code that is part

								of Emacs to turn control characters into faces.  That code is pretty

								slow and this is quite noticeable when showing a log with many branches

								and merges.  For that reason ‘--color’ is not enabled by default

								anymore.  Consider leaving it at that.


								Diff Performance

								................


								If diffs are slow, then consider turning off some optional diff features

								by setting all or some of the following variables to ‘nil’:

								‘magit-diff-highlight-indentation’, ‘magit-diff-highlight-trailing’,

								‘magit-diff-paint-whitespace’, ‘magit-diff-highlight-hunk-body’, and

								‘magit-diff-refine-hunk’.


								   When showing a commit instead of some arbitrary diff, then some

								additional information is displayed.  Calculating this information can

								be quite expensive given certain circumstances.  If looking at a commit

								using ‘magit-revision-mode’ takes considerably more time than looking at

								the same commit in ‘magit-diff-mode’, then consider setting

								‘magit-revision-insert-related-refs’ to ‘nil’.


								Refs Buffer Performance

								.......................


								When refreshing the "references buffer" is slow, then that’s usually

								because several hundred refs are being displayed.  The best way to

								address that is to display fewer refs, obviously.


								   If you are not, or only mildly, interested in seeing the list of

								tags, then start by not displaying them:


								     (remove-hook 'magit-refs-sections-hook 'magit-insert-tags)


								   Then you should also make sure that the listed remote branches

								actually all exist.  You can do so by pruning branches which no longer

								exist using ‘f-pa’.


								Committing Performance

								......................


								When you initiate a commit, then Magit by default automatically shows a

								diff of the changes you are about to commit.  For large commits this can

								take a long time, which is especially distracting when you are

								committing large amounts of generated data which you don’t actually

								intend to inspect before committing.  This behavior can be turned off

								using:


								     (remove-hook 'server-switch-hook 'magit-commit-diff)


								   Then you can type ‘C-c C-d’ to show the diff when you actually want

								to see it, but only then.  Alternatively you can leave the hook alone

								and just type ‘C-g’ in those cases when it takes too long to generate

								the diff.  If you do that, then you will end up with a broken diff

								buffer, but doing it this way has the advantage that you usually get to

								see the diff, which is useful because it increases the odds that you

								spot potential issues.


								The Built-In VC Package

								.......................


								Emacs comes with a version control interface called "VC", see *note

								(emacs)Version Control::.  It is enabled be default, and if you don’t

								use it in addition to Magit, then you should disable it to keep it from

								performing unnecessary work:


								     (setq vc-handled-backends nil)


								   You can also disable its use for Git but keep using it when using

								another version control system:


								     (setq vc-handled-backends (delq 'Git vc-handled-backends))


								File: magit.info,  Node: Microsoft Windows Performance,  Next: MacOS Performance,  Up: Performance


								Microsoft Windows Performance

								.............................


								In order to update the status buffer, ‘git’ has to be run a few dozen

								times.  That is problematic on Microsoft Windows, because that operating

								system is exceptionally slow at starting processes.  Sadly this is an

								issue that can only be fixed by Microsoft itself, and they don’t appear

								to be particularly interested in doing so.


								   Beside the subprocess issue, there are also other Windows-specific

								performance issues.  Some of these have workarounds.  The maintainers of

								"Git for Windows" try to improve performance on Windows.  Always use the

								latest release in order to benefit from the latest performance tweaks.

								Magit too tries to work around some Windows-specific issues.


								   According to some sources, setting the following Git variables can

								also help.


								     git config --global core.preloadindex true   # default since v2.1

								     git config --global core.fscache true        # default since v2.8

								     git config --global gc.auto 256


								   You should also check whether an anti-virus program is affecting

								performance.


								File: magit.info,  Node: MacOS Performance,  Prev: Microsoft Windows Performance,  Up: Performance


								MacOS Performance

								.................


								On macOS Emacs currently creates child processes using ‘fork’.  It

								appears that this also copies GUI resources.  The result is that forking

								takes about 30 times as long on Darwin than on Linux.  And because Magit

								starts many ‘git’ processes even when doing simple things, that makes

								quite a difference.


								   On the ‘master’ branch Emacs now uses ‘vfork’ when possible, like

								this was already done on Linux, and now child creation only takes about

								twice as long on Darwin.  See (1) for more information.


								   Nobody knows when the changes on the ‘master’ branch will be released

								as ‘26.1’, but it is still a long way off.  You might want to get your

								hands on this change before then.  The easiest way to get a patched

								Emacs is to install the ‘emacs-plus’ formula (2) using ‘homebrew’.  The

								change has been backported, so you get it not only when using ‘--HEAD’,

								but also when using ‘--devel’ or when installing the latest release (by

								not using a version argument).


								   Alternatively you can apply the backport (3) manually.


								   ---------- Footnotes ----------


								   (1)

								<https://lists.gnu.org/archive/html/bug-gnu-emacs/2017-04/msg00201.html>


								   (2) <https://github.com/d12frosted/homebrew-emacs-plus>


								   (3)

								<https://gist.githubusercontent.com/aaronjensen/f45894ddf431ecbff78b1bcf533d3e6b/raw/6a5cd7f57341aba673234348d8b0d2e776f86719/Emacs-25-OS-X-use-vfork.patch>


								File: magit.info,  Node: Plumbing,  Next: FAQ,  Prev: Customizing,  Up: Top


								10 Plumbing

								***********


								The following sections describe how to use several of Magit’s core

								abstractions to extend Magit itself or implement a separate extension.


								   A few of the low-level features used by Magit have been factored out

								into separate libraries/packages, so that they can be used by other

								packages, without having to depend on Magit.  See *note

								(with-editor)Top:: for information about ‘with-editor’.  ‘transient’

								doesn’t have a manual yet.


								   If you are trying to find an unused key that you can bind to a

								command provided by your own Magit extension, then checkout

								<https://github.com/magit/magit/wiki/Plugin-Dispatch-Key-Registry>.


								* Menu:


								* Calling Git::

								* Section Plumbing::

								* Refreshing Buffers::

								* Conventions::


								File: magit.info,  Node: Calling Git,  Next: Section Plumbing,  Up: Plumbing


								10.1 Calling Git

								================


								Magit provides many specialized functions for calling Git.  All of these

								functions are defined in either ‘magit-git.el’ or ‘magit-process.el’ and

								have one of the prefixes ‘magit-run-’, ‘magit-call-’, ‘magit-start-’, or

								‘magit-git-’ (which is also used for other things).


								   All of these functions accept an indefinite number of arguments,

								which are strings that specify command line arguments for Git (or in

								some cases an arbitrary executable).  These arguments are flattened

								before being passed on to the executable; so instead of strings they can

								also be lists of strings and arguments that are ‘nil’ are silently

								dropped.  Some of these functions also require a single mandatory

								argument before these command line arguments.


								   Roughly speaking, these functions run Git either to get some value or

								for side-effects.  The functions that return a value are useful to

								collect the information necessary to populate a Magit buffer, while the

								others are used to implement Magit commands.


								   The functions in the value-only group always run synchronously, and

								they never trigger a refresh.  The function in the side-effect group can

								be further divided into subgroups depending on whether they run Git

								synchronously or asynchronously, and depending on whether they trigger a

								refresh when the executable has finished.


								* Menu:


								* Getting a Value from Git::

								* Calling Git for Effect::


								File: magit.info,  Node: Getting a Value from Git,  Next: Calling Git for Effect,  Up: Calling Git


								10.1.1 Getting a Value from Git

								-------------------------------


								These functions run Git in order to get a value, an exit status, or

								output.  Of course you could also use them to run Git commands that have

								side-effects, but that should be avoided.


								 -- Function: magit-git-exit-code &rest args


								     Executes git with ARGS and returns its exit code.


								 -- Function: magit-git-success &rest args


								     Executes git with ARGS and returns ‘t’ if the exit code is ‘0’,

								     ‘nil’ otherwise.


								 -- Function: magit-git-failure &rest args


								     Executes git with ARGS and returns ‘t’ if the exit code is ‘1’,

								     ‘nil’ otherwise.


								 -- Function: magit-git-true &rest args


								     Executes git with ARGS and returns ‘t’ if the first line printed by

								     git is the string "true", ‘nil’ otherwise.


								 -- Function: magit-git-false &rest args


								     Executes git with ARGS and returns ‘t’ if the first line printed by

								     git is the string "false", ‘nil’ otherwise.


								 -- Function: magit-git-insert &rest args


								     Executes git with ARGS and inserts its output at point.


								 -- Function: magit-git-string &rest args


								     Executes git with ARGS and returns the first line of its output.

								     If there is no output or if it begins with a newline character,

								     then this returns ‘nil’.


								 -- Function: magit-git-lines &rest args


								     Executes git with ARGS and returns its output as a list of lines.

								     Empty lines anywhere in the output are omitted.


								 -- Function: magit-git-items &rest args


								     Executes git with ARGS and returns its null-separated output as a

								     list.  Empty items anywhere in the output are omitted.


								     If the value of option ‘magit-git-debug’ is non-nil and git exits

								     with a non-zero exit status, then warn about that in the echo area

								     and add a section containing git’s standard error in the current

								     repository’s process buffer.


								   If an error occurs when using one of the above functions, then that

								is usually due to a bug, i.e.  using an argument which is not actually

								supported.  Such errors are usually not reported, but when they occur we

								need to be able to debug them.


								 -- User Option: magit-git-debug


								     Whether to report errors that occur when using ‘magit-git-insert’,

								     ‘magit-git-string’, ‘magit-git-lines’, or ‘magit-git-items’.  This

								     does not actually raise an error.  Instead a message is shown in

								     the echo area, and git’s standard error is insert into a new

								     section in the current repository’s process buffer.


								 -- Function: magit-git-str &rest args


								     This is a variant of ‘magit-git-string’ that ignores the option

								     ‘magit-git-debug’.  It is mainly intended to be used while handling

								     errors in functions that do respect that option.  Using such a

								     function while handing an error could cause yet another error and

								     therefore lead to an infinite recursion.  You probably won’t ever

								     need to use this function.


								File: magit.info,  Node: Calling Git for Effect,  Prev: Getting a Value from Git,  Up: Calling Git


								10.1.2 Calling Git for Effect

								-----------------------------


								These functions are used to run git to produce some effect.  Most Magit

								commands that actually run git do so by using such a function.


								   Because we do not need to consume git’s output when using these

								functions, their output is instead logged into a per-repository buffer,

								which can be shown using ‘$’ from a Magit buffer or ‘M-x magit-process’

								elsewhere.


								   These functions can have an effect in two distinct ways.  Firstly,

								running git may change something, i.e.  create or push a new commit.

								Secondly, that change may require that Magit buffers are refreshed to

								reflect the changed state of the repository.  But refreshing isn’t

								always desirable, so only some of these functions do perform such a

								refresh after git has returned.


								   Sometimes it is useful to run git asynchronously.  For example, when

								the user has just initiated a push, then there is no reason to make her

								wait until that has completed.  In other cases it makes sense to wait

								for git to complete before letting the user do something else.  For

								example after staging a change it is useful to wait until after the

								refresh because that also automatically moves to the next change.


								 -- Function: magit-call-git &rest args


								     Calls git synchronously with ARGS.


								 -- Function: magit-call-process program &rest args


								     Calls PROGRAM synchronously with ARGS.


								 -- Function: magit-run-git &rest args


								     Calls git synchronously with ARGS and then refreshes.


								 -- Function: magit-run-git-with-input input &rest args


								     Calls git synchronously with ARGS and sends it INPUT on standard

								     input.


								     INPUT should be a buffer or the name of an existing buffer.  The

								     content of that buffer is used as the process’ standard input.

								     After the process returns a refresh is performed.


								     As a special case, INPUT may also be nil.  In that case the content

								     of the current buffer is used as standard input and *no* refresh is

								     performed.


								     This function actually runs git asynchronously.  But then it waits

								     for the process to return, so the function itself is synchronous.


								 -- Function: magit-run-git-with-logfile file &rest args


								     Calls git synchronously with ARGS.  The process’ output is saved in

								     FILE.  This is rarely useful and so this function might be removed

								     in the future.


								     This function actually runs git asynchronously.  But then it waits

								     for the process to return, so the function itself is synchronous.


								 -- Function: magit-git &rest args


								     Calls git synchronously with ARGS for side-effects only.  This

								     function does not refresh the buffer.


								 -- Function: magit-git-wash washer &rest args


								     Execute Git with ARGS, inserting washed output at point.  Actually

								     first insert the raw output at point.  If there is no output call

								     ‘magit-cancel-section’.  Otherwise temporarily narrow the buffer to

								     the inserted text, move to its beginning, and then call function

								     WASHER with ARGS as its sole argument.


								   And now for the asynchronous variants.


								 -- Function: magit-run-git-async &rest args


								     Start Git, prepare for refresh, and return the process object.

								     ARGS is flattened and then used as arguments to Git.


								     Display the command line arguments in the echo area.


								     After Git returns some buffers are refreshed: the buffer that was

								     current when this function was called (if it is a Magit buffer and

								     still alive), as well as the respective Magit status buffer.

								     Unmodified buffers visiting files that are tracked in the current

								     repository are reverted if ‘magit-revert-buffers’ is non-nil.


								 -- Function: magit-run-git-with-editor &rest args


								     Export GIT_EDITOR and start Git.  Also prepare for refresh and

								     return the process object.  ARGS is flattened and then used as

								     arguments to Git.


								     Display the command line arguments in the echo area.


								     After Git returns some buffers are refreshed: the buffer that was

								     current when this function was called (if it is a Magit buffer and

								     still alive), as well as the respective Magit status buffer.


								 -- Function: magit-start-git &rest args


								     Start Git, prepare for refresh, and return the process object.


								     If INPUT is non-nil, it has to be a buffer or the name of an

								     existing buffer.  The buffer content becomes the processes standard

								     input.


								     Option ‘magit-git-executable’ specifies the Git executable and

								     option ‘magit-git-global-arguments’ specifies constant arguments.

								     The remaining arguments ARGS specify arguments to Git.  They are

								     flattened before use.


								     After Git returns, some buffers are refreshed: the buffer that was

								     current when this function was called (if it is a Magit buffer and

								     still alive), as well as the respective Magit status buffer.

								     Unmodified buffers visiting files that are tracked in the current

								     repository are reverted if ‘magit-revert-buffers’ is non-nil.


								 -- Function: magit-start-process &rest args


								     Start PROGRAM, prepare for refresh, and return the process object.


								     If optional argument INPUT is non-nil, it has to be a buffer or the

								     name of an existing buffer.  The buffer content becomes the

								     processes standard input.


								     The process is started using ‘start-file-process’ and then setup to

								     use the sentinel ‘magit-process-sentinel’ and the filter

								     ‘magit-process-filter’.  Information required by these functions is

								     stored in the process object.  When this function returns the

								     process has not started to run yet so it is possible to override

								     the sentinel and filter.


								     After the process returns, ‘magit-process-sentinel’ refreshes the

								     buffer that was current when ‘magit-start-process’ was called (if

								     it is a Magit buffer and still alive), as well as the respective

								     Magit status buffer.  Unmodified buffers visiting files that are

								     tracked in the current repository are reverted if

								     ‘magit-revert-buffers’ is non-nil.


								 -- Variable: magit-this-process


								     The child process which is about to start.  This can be used to

								     change the filter and sentinel.


								 -- Variable: magit-process-raise-error


								     When this is non-nil, then ‘magit-process-sentinel’ raises an error

								     if git exits with a non-zero exit status.  For debugging purposes.


								File: magit.info,  Node: Section Plumbing,  Next: Refreshing Buffers,  Prev: Calling Git,  Up: Plumbing


								10.2 Section Plumbing

								=====================


								* Menu:


								* Creating Sections::

								* Section Selection::

								* Matching Sections::


								File: magit.info,  Node: Creating Sections,  Next: Section Selection,  Up: Section Plumbing


								10.2.1 Creating Sections

								------------------------


								 -- Macro: magit-insert-section &rest args


								     Insert a section at point.


								     TYPE is the section type, a symbol.  Many commands that act on the

								     current section behave differently depending on that type.  Also if

								     a variable ‘magit-TYPE-section-map’ exists, then use that as the

								     text-property ‘keymap’ of all text belonging to the section (but

								     this may be overwritten in subsections).  TYPE can also have the

								     form ‘(eval FORM)’ in which case FORM is evaluated at runtime.


								     Optional VALUE is the value of the section, usually a string that

								     is required when acting on the section.


								     When optional HIDE is non-nil collapse the section body by default,

								     i.e.  when first creating the section, but not when refreshing the

								     buffer.  Otherwise, expand it by default.  This can be overwritten

								     using ‘magit-section-set-visibility-hook’.  When a section is

								     recreated during a refresh, then the visibility of predecessor is

								     inherited and HIDE is ignored (but the hook is still honored).


								     BODY is any number of forms that actually insert the section’s

								     heading and body.  Optional NAME, if specified, has to be a symbol,

								     which is then bound to the struct of the section being inserted.


								     Before BODY is evaluated the ‘start’ of the section object is set

								     to the value of ‘point’ and after BODY was evaluated its ‘end’ is

								     set to the new value of ‘point’; BODY is responsible for moving

								     ‘point’ forward.


								     If it turns out inside BODY that the section is empty, then

								     ‘magit-cancel-section’ can be used to abort and remove all traces

								     of the partially inserted section.  This can happen when creating a

								     section by washing Git’s output and Git didn’t actually output

								     anything this time around.


								 -- Function: magit-insert-heading &rest args


								     Insert the heading for the section currently being inserted.


								     This function should only be used inside ‘magit-insert-section’.


								     When called without any arguments, then just set the ‘content’ slot

								     of the object representing the section being inserted to a marker

								     at ‘point’.  The section should only contain a single line when

								     this function is used like this.


								     When called with arguments ARGS, which have to be strings, then

								     insert those strings at point.  The section should not contain any

								     text before this happens and afterwards it should again only

								     contain a single line.  If the ‘face’ property is set anywhere

								     inside any of these strings, then insert all of them unchanged.

								     Otherwise use the ‘magit-section-heading’ face for all inserted

								     text.


								     The ‘content’ property of the section struct is the end of the

								     heading (which lasts from ‘start’ to ‘content’) and the beginning

								     of the body (which lasts from ‘content’ to ‘end’).  If the value of

								     ‘content’ is nil, then the section has no heading and its body

								     cannot be collapsed.  If a section does have a heading then its

								     height must be exactly one line, including a trailing newline

								     character.  This isn’t enforced; you are responsible for getting it

								     right.  The only exception is that this function does insert a

								     newline character if necessary.


								 -- Function: magit-cancel-section


								     Cancel the section currently being inserted.  This exits the

								     innermost call to ‘magit-insert-section’ and removes all traces of

								     what has already happened inside that call.


								 -- Function: magit-define-section-jumper sym title &optional value


								     Define an interactive function to go to section SYM.  TITLE is the

								     displayed title of the section.


								File: magit.info,  Node: Section Selection,  Next: Matching Sections,  Prev: Creating Sections,  Up: Section Plumbing


								10.2.2 Section Selection

								------------------------


								 -- Function: magit-current-section


								     Return the section at point.


								 -- Function: magit-region-sections &optional condition multiple


								     Return a list of the selected sections.


								     When the region is active and constitutes a valid section

								     selection, then return a list of all selected sections.  This is

								     the case when the region begins in the heading of a section and

								     ends in the heading of the same section or in that of a sibling

								     section.  If optional MULTIPLE is non-nil, then the region cannot

								     begin and end in the same section.


								     When the selection is not valid, then return nil.  In this case,

								     most commands that can act on the selected sections will instead

								     act on the section at point.


								     When the region looks like it would in any other buffer then the

								     selection is invalid.  When the selection is valid then the region

								     uses the ‘magit-section-highlight’ face.  This does not apply to

								     diffs where things get a bit more complicated, but even here if the

								     region looks like it usually does, then that’s not a valid

								     selection as far as this function is concerned.


								     If optional CONDITION is non-nil, then the selection not only has

								     to be valid; all selected sections additionally have to match

								     CONDITION, or nil is returned.  See ‘magit-section-match’ for the

								     forms CONDITION can take.


								 -- Function: magit-region-values &optional condition multiple


								     Return a list of the values of the selected sections.


								     Return the values that themselves would be returned by

								     ‘magit-region-sections’ (which see).


								File: magit.info,  Node: Matching Sections,  Prev: Section Selection,  Up: Section Plumbing


								10.2.3 Matching Sections

								------------------------


								‘M-x magit-describe-section-briefly’     (‘magit-describe-section-briefly’)


								     Show information about the section at point.  This command is

								     intended for debugging purposes.


								 -- Function: magit-section-ident section


								     Return an unique identifier for SECTION.  The return value has the

								     form ‘((TYPE . VALUE)...)’.


								 -- Function: magit-get-section ident &optional root


								     Return the section identified by IDENT.  IDENT has to be a list as

								     returned by ‘magit-section-ident’.


								 -- Function: magit-section-match condition &optional section


								     Return ‘t’ if SECTION matches CONDITION.  SECTION defaults to the

								     section at point.  If SECTION is not specified and there also is no

								     section at point, then return ‘nil’.


								     CONDITION can take the following forms:

								        • ‘(CONDITION...)’


								          matches if any of the CONDITIONs matches.


								        • ‘[CLASS...]’


								          matches if the section’s class is the same as the first CLASS

								          or a subclass of that; the section’s parent class matches the

								          second CLASS; and so on.


								        • ‘[* CLASS...]’


								          matches sections that match ‘[CLASS...]’ and also recursively

								          all their child sections.


								        • ‘CLASS’


								          matches if the section’s class is the same as CLASS or a

								          subclass of that; regardless of the classes of the parent

								          sections.


								     Each CLASS should be a class symbol, identifying a class that

								     derives from ‘magit-section’.  For backward compatibility CLASS can

								     also be a "type symbol".  A section matches such a symbol if the

								     value of its ‘type’ slot is ‘eq’.  If a type symbol has an entry in

								     ‘magit--section-type-alist’, then a section also matches that type

								     if its class is a subclass of the class that corresponds to the

								     type as per that alist.


								     Note that it is not necessary to specify the complete section

								     lineage as printed by ‘magit-describe-section-briefly’, unless of

								     course you want to be that precise.


								 -- Function: magit-section-value-if condition &optional section


								     If the section at point matches CONDITION, then return its value.


								     If optional SECTION is non-nil then test whether that matches

								     instead.  If there is no section at point and SECTION is nil, then

								     return nil.  If the section does not match, then return nil.


								     See ‘magit-section-match’ for the forms CONDITION can take.


								 -- Function: magit-section-case &rest clauses


								     Choose among clauses on the type of the section at point.


								     Each clause looks like (CONDITION BODY...).  The type of the

								     section is compared against each CONDITION; the BODY forms of the

								     first match are evaluated sequentially and the value of the last

								     form is returned.  Inside BODY the symbol ‘it’ is bound to the

								     section at point.  If no clause succeeds or if there is no section

								     at point return nil.


								     See ‘magit-section-match’ for the forms CONDITION can take.

								     Additionally a CONDITION of t is allowed in the final clause and

								     matches if no other CONDITION match, even if there is no section at

								     point.


								 -- Variable: magit-root-section


								     The root section in the current buffer.  All other sections are

								     descendants of this section.  The value of this variable is set by

								     ‘magit-insert-section’ and you should never modify it.


								   For diff related sections a few additional tools exist.


								 -- Function: magit-diff-type &optional section


								     Return the diff type of SECTION.


								     The returned type is one of the symbols ‘staged’, ‘unstaged’,

								     ‘committed’, or ‘undefined’.  This type serves a similar purpose as

								     the general type common to all sections (which is stored in the

								     ‘type’ slot of the corresponding ‘magit-section’ struct) but takes

								     additional information into account.  When the SECTION isn’t

								     related to diffs and the buffer containing it also isn’t a

								     diff-only buffer, then return nil.


								     Currently the type can also be one of ‘tracked’ and ‘untracked’,

								     but these values are not handled explicitly in every place they

								     should be.  A possible fix could be to just return nil here.


								     The section has to be a ‘diff’ or ‘hunk’ section, or a section

								     whose children are of type ‘diff’.  If optional SECTION is nil,

								     return the diff type for the current section.  In buffers whose

								     major mode is ‘magit-diff-mode’ SECTION is ignored and the type is

								     determined using other means.  In ‘magit-revision-mode’ buffers the

								     type is always ‘committed’.


								 -- Function: magit-diff-scope &optional section strict


								     Return the diff scope of SECTION or the selected section(s).


								     A diff’s "scope" describes what part of a diff is selected, it is a

								     symbol, one of ‘region’, ‘hunk’, ‘hunks’, ‘file’, ‘files’, or

								     ‘list’.  Do not confuse this with the diff "type", as returned by

								     ‘magit-diff-type’.


								     If optional SECTION is non-nil, then return the scope of that,

								     ignoring the sections selected by the region.  Otherwise return the

								     scope of the current section, or if the region is active and

								     selects a valid group of diff related sections, the type of these

								     sections, i.e.  ‘hunks’ or ‘files’.  If SECTION (or if the current

								     section that is nil) is a ‘hunk’ section and the region starts and

								     ends inside the body of a that section, then the type is ‘region’.


								     If optional STRICT is non-nil then return nil if the diff type of

								     the section at point is ‘untracked’ or the section at point is not

								     actually a ‘diff’ but a ‘diffstat’ section.


								File: magit.info,  Node: Refreshing Buffers,  Next: Conventions,  Prev: Section Plumbing,  Up: Plumbing


								10.3 Refreshing Buffers

								=======================


								All commands that create a new Magit buffer or change what is being

								displayed in an existing buffer do so by calling ‘magit-mode-setup’.

								Among other things, that function sets the buffer local values of

								‘default-directory’ (to the top-level of the repository),

								‘magit-refresh-function’, and ‘magit-refresh-args’.


								   Buffers are refreshed by calling the function that is the local value

								of ‘magit-refresh-function’ (a function named ‘magit-*-refresh-buffer’,

								where ‘*’ may be something like ‘diff’) with the value of

								‘magit-refresh-args’ as arguments.


								 -- Macro: magit-mode-setup buffer switch-func mode refresh-func

								          &optional refresh-args


								     This function displays and selects BUFFER, turns on MODE, and

								     refreshes a first time.


								     This function displays and optionally selects BUFFER by calling

								     ‘magit-mode-display-buffer’ with BUFFER, MODE and SWITCH-FUNC as

								     arguments.  Then it sets the local value of

								     ‘magit-refresh-function’ to REFRESH-FUNC and that of

								     ‘magit-refresh-args’ to REFRESH-ARGS.  Finally it creates the

								     buffer content by calling REFRESH-FUNC with REFRESH-ARGS as

								     arguments.


								     All arguments are evaluated before switching to BUFFER.


								 -- Function: magit-mode-display-buffer buffer mode &optional

								          switch-function


								     This function display BUFFER in some window and select it.  BUFFER

								     may be a buffer or a string, the name of a buffer.  The buffer is

								     returned.


								     Unless BUFFER is already displayed in the selected frame, store the

								     previous window configuration as a buffer local value, so that it

								     can later be restored by ‘magit-mode-bury-buffer’.


								     The buffer is displayed and selected using SWITCH-FUNCTION.  If

								     that is ‘nil’ then ‘pop-to-buffer’ is used if the current buffer’s

								     major mode derives from ‘magit-mode’.  Otherwise ‘switch-to-buffer’

								     is used.


								 -- Variable: magit-refresh-function


								     The value of this buffer-local variable is the function used to

								     refresh the current buffer.  It is called with ‘magit-refresh-args’

								     as arguments.


								 -- Variable: magit-refresh-args


								     The list of arguments used by ‘magit-refresh-function’ to refresh

								     the current buffer.  ‘magit-refresh-function’ is called with these

								     arguments.


								     The value is usually set using ‘magit-mode-setup’, but in some

								     cases it’s also useful to provide commands that can change the

								     value.  For example, the ‘magit-diff-refresh’ transient can be used

								     to change any of the arguments used to display the diff, without

								     having to specify again which differences should be shown, but

								     ‘magit-diff-more-context’, ‘magit-diff-less-context’ and

								     ‘magit-diff-default-context’ change just the ‘-U<N>’ argument.  In

								     both case this is done by changing the value of this variable and

								     then calling this ‘magit-refresh-function’.


								File: magit.info,  Node: Conventions,  Prev: Refreshing Buffers,  Up: Plumbing


								10.4 Conventions

								================


								Also see *note Completion and Confirmation::.


								* Menu:


								* Theming Faces::


								File: magit.info,  Node: Theming Faces,  Up: Conventions


								10.4.1 Theming Faces

								--------------------


								The default theme uses blue for local branches, green for remote

								branches, and goldenrod (brownish yellow) for tags.  When creating a new

								theme, you should probably follow that example.  If your theme already

								uses other colors, then stick to that.


								   In older releases these reference faces used to have a background

								color and a box around them.  The basic default faces no longer do so,

								to make Magit buffers much less noisy, and you should follow that

								example at least with regards to boxes.  (Boxes were used in the past to

								work around a conflict between the highlighting overlay and text

								property backgrounds.  That’s no longer necessary because highlighting

								no longer causes other background colors to disappear.)  Alternatively

								you can keep the background color and/or box, but then have to take

								special care to adjust ‘magit-branch-current’ accordingly.  By default

								it looks mostly like ‘magit-branch-local’, but with a box (by default

								the former is the only face that uses a box, exactly so that it sticks

								out).  If the former also uses a box, then you have to make sure that it

								differs in some other way from the latter.


								   The most difficult faces to theme are those related to diffs,

								headings, highlighting, and the region.  There are faces that fall into

								all four groups - expect to spend some time getting this right.


								   The ‘region’ face in the default theme, in both the light and dark

								variants, as well as in many other themes, distributed with Emacs or by

								third-parties, is very ugly.  It is common to use a background color

								that really sticks out, which is ugly but if that were the only problem

								then it would be acceptable.  Unfortunately many themes also set the

								foreground color, which ensures that all text within the region is

								readable.  Without doing that there might be cases where some foreground

								color is too close to the region background color to still be readable.

								But it also means that text within the region loses all syntax

								highlighting.


								   I consider the work that went into getting the ‘region’ face right to

								be a good indicator for the general quality of a theme.  My

								recommendation for the ‘region’ face is this: use a background color

								slightly different from the background color of the ‘default’ face, and

								do not set the foreground color at all.  So for a light theme you might

								use a light (possibly tinted) gray as the background color of ‘default’

								and a somewhat darker gray for the background of ‘region’.  That should

								usually be enough to not collide with the foreground color of any other

								face.  But if some other faces also set a light gray as background

								color, then you should also make sure it doesn’t collide with those (in

								some cases it might be acceptable though).


								   Magit only uses the ‘region’ face when the region is "invalid" by its

								own definition.  In a Magit buffer the region is used to either select

								multiple sibling sections, so that commands which support it act on all

								of these sections instead of just the current section, or to select

								lines within a single hunk section.  In all other cases, the section is

								considered invalid and Magit won’t act on it.  But such invalid sections

								happen, either because the user has not moved point enough yet to make

								it valid or because she wants to use a non-magit command to act on the

								region, e.g.  ‘kill-region’.


								   So using the regular ‘region’ face for invalid sections is a feature.

								It tells the user that Magit won’t be able to act on it.  It’s

								acceptable if that face looks a bit odd and even (but less so) if it

								collides with the background colors of section headings and other things

								that have a background color.


								   Magit highlights the current section.  If a section has subsections,

								then all of them are highlighted.  This is done using faces that have

								"highlight" in their names.  For most sections,

								‘magit-section-highlight’ is used for both the body and the heading.

								Like the ‘region’ face, it should only set the background color to

								something similar to that of ‘default’.  The highlight background color

								must be different from both the ‘region’ background color and the

								‘default’ background color.


								   For diff related sections Magit uses various faces to highlight

								different parts of the selected section(s).  Note that hunk headings,

								unlike all other section headings, by default have a background color,

								because it is useful to have very visible separators between hunks.

								That face ‘magit-diff-hunk-heading’, should be different from both

								‘magit-diff-hunk-heading-highlight’ and ‘magit-section-highlight’, as

								well as from ‘magit-diff-context’ and ‘magit-diff-context-highlight’.

								By default we do that by changing the foreground color.  Changing the

								background color would lead to complications, and there are already

								enough we cannot get around.  (Also note that it is generally a good

								idea for section headings to always be bold, but only for sections that

								have subsections).


								   When there is a valid region selecting diff-related sibling sections,

								i.e.  multiple files or hunks, then the bodies of all these sections use

								the respective highlight faces, but additionally the headings instead

								use one of the faces ‘magit-diff-file-heading-selection’ or

								‘magit-diff-hunk-heading-selection’.  These faces have to be different

								from the regular highlight variants to provide explicit visual

								indication that the region is active.


								   When theming diff related faces, start by setting the option

								‘magit-diff-refine-hunk’ to ‘all’.  You might personally prefer to only

								refine the current hunk or not use hunk refinement at all, but some of

								the users of your theme want all hunks to be refined, so you have to

								cater to that.


								   (Also turn on ‘magit-diff-highlight-indentation’,

								‘magit-diff-highlight-trailing’, and ‘magit-diff-paint-whitespace’; and

								insert some whitespace errors into the code you use for testing.)


								   For e.g.  "added lines" you have to adjust three faces:

								‘magit-diff-added’, ‘magit-diff-added-highlight’, and

								‘smerge-refined-added’.  Make sure that the latter works well with both

								of the former, as well as ‘smerge-other’ and ‘diff-added’.  Then do the

								same for the removed lines, context lines, lines added by us, and lines

								added by them.  Also make sure the respective added, removed, and

								context faces use approximately the same saturation for both the

								highlighted and unhighlighted variants.  Also make sure the file and

								diff headings work nicely with context lines (e.g.  make them look

								different).  Line faces should set both the foreground and the

								background color.  For example, for added lines use two different

								greens.


								   It’s best if the foreground color of both the highlighted and the

								unhighlighted variants are the same, so you will need to have to find a

								color that works well on the highlight and unhighlighted background, the

								refine background, and the highlight context background.  When there is

								an hunk internal region, then the added- and removed-lines background

								color is used only within that region.  Outside the region the

								highlighted context background color is used.  This makes it easier to

								see what is being staged.  With an hunk internal region the hunk heading

								is shown using ‘magit-diff-hunk-heading-selection’, and so are the thin

								lines that are added around the lines that fall within the region.  The

								background color of that has to be distinct enough from the various

								other involved background colors.


								   Nobody said this would be easy.  If your theme restricts itself to a

								certain set of colors, then you should make an exception here.

								Otherwise it would be impossible to make the diffs look good in each and

								every variation.  Actually you might want to just stick to the default

								definitions for these faces.  You have been warned.  Also please note

								that if you do not get this right, this will in some cases look to users

								like bugs in Magit - so please do it right or not at all.


								File: magit.info,  Node: FAQ,  Next: Debugging Tools,  Prev: Plumbing,  Up: Top


								Appendix A FAQ

								**************


								The next two nodes lists frequently asked questions.  For a list of

								frequently *and recently* asked questions, i.e.  questions that haven’t

								made it into the manual yet, see

								<https://github.com/magit/magit/wiki/FAQ>.


								   Please also use the *note Debugging Tools::.


								* Menu:


								* FAQ - How to ...?::

								* FAQ - Issues and Errors::


								File: magit.info,  Node: FAQ - How to ...?,  Next: FAQ - Issues and Errors,  Up: FAQ


								A.1 FAQ - How to ...?

								=====================


								* Menu:


								* How to show git's output?::

								* How to install the gitman info manual?::

								* How to show diffs for gpg-encrypted files?::

								* How does branching and pushing work?::

								* Can Magit be used as ediff-version-control-package?::


								File: magit.info,  Node: How to show git's output?,  Next: How to install the gitman info manual?,  Up: FAQ - How to ...?


								A.1.1 How to show git’s output?

								-------------------------------


								To show the output of recently run git commands, press ‘$’ (or, if that

								isn’t available, ‘M-x magit-process-buffer’).  This will show a buffer

								containing a section per git invocation; as always press ‘TAB’ to expand

								or collapse them.


								   By default, git’s output is only inserted into the process buffer if

								it is run for side-effects.  When the output is consumed in some way,

								also inserting it into the process buffer would be too expensive.  For

								debugging purposes, it’s possible to do so anyway by setting

								‘magit-git-debug’ to ‘t’.


								File: magit.info,  Node: How to install the gitman info manual?,  Next: How to show diffs for gpg-encrypted files?,  Prev: How to show git's output?,  Up: FAQ - How to ...?


								A.1.2 How to install the gitman info manual?

								--------------------------------------------


								Git’s manpages can be exported as an info manual called ‘gitman’.

								Magit’s own info manual links to nodes in that manual instead of the

								actual manpages because Info doesn’t support linking to manpages.


								   Unfortunately some distributions do not install the ‘gitman’ manual

								by default and you will have to install a separate documentation package

								to get it.


								   Magit patches Info adding the ability to visit links to the ‘gitman’

								Info manual by instead viewing the respective manpage.  If you prefer

								that approach, then set the value of ‘magit-view-git-manual-method’ to

								one of the supported packages ‘man’ or ‘woman’, e.g.:


								     (setq magit-view-git-manual-method 'man)


								File: magit.info,  Node: How to show diffs for gpg-encrypted files?,  Next: How does branching and pushing work?,  Prev: How to install the gitman info manual?,  Up: FAQ - How to ...?


								A.1.3 How to show diffs for gpg-encrypted files?

								------------------------------------------------


								Git supports showing diffs for encrypted files, but has to be told to do

								so.  Since Magit just uses Git to get the diffs, configuring Git also

								affects the diffs displayed inside Magit.


								     git config --global diff.gpg.textconv "gpg --no-tty --decrypt"

								     echo "*.gpg filter=gpg diff=gpg" > .gitattributes


								File: magit.info,  Node: How does branching and pushing work?,  Next: Can Magit be used as ediff-version-control-package?,  Prev: How to show diffs for gpg-encrypted files?,  Up: FAQ - How to ...?


								A.1.4 How does branching and pushing work?

								------------------------------------------


								Please see *note Branching:: and

								<http://emacsair.me/2016/01/17/magit-2.4>


								File: magit.info,  Node: Can Magit be used as ediff-version-control-package?,  Prev: How does branching and pushing work?,  Up: FAQ - How to ...?


								A.1.5 Can Magit be used as ‘ediff-version-control-package’?

								-----------------------------------------------------------


								No, it cannot.  For that to work the functions ‘ediff-magit-internal’

								and ‘ediff-magit-merge-internal’ would have to be implemented, and they

								are not.  These two functions are only used by the three commands

								‘ediff-revision’, ‘ediff-merge-revisions-with-ancestor’, and

								‘ediff-merge-revisions’.


								   These commands only delegate the task of populating buffers with

								certain revisions to the "internal" functions.  The equally important

								task of determining which revisions are to be compared/merged is not

								delegated.  Instead this is done without any support whatsoever from the

								version control package/system - meaning that the user has to enter the

								revisions explicitly.  Instead of implementing ‘ediff-magit-internal’ we

								provide ‘magit-ediff-compare’, which handles both tasks like it is 2005.


								   The other commands ‘ediff-merge-revisions’ and

								‘ediff-merge-revisions-with-ancestor’ are normally not what you want

								when using a modern version control system like Git.  Instead of letting

								the user resolve only those conflicts which Git could not resolve on its

								own, they throw away all work done by Git and then expect the user to

								manually merge all conflicts, including those that had already been

								resolved.  That made sense back in the days when version control systems

								couldn’t merge (or so I have been told), but not anymore.  Once in a

								blue moon you might actually want to see all conflicts, in which case

								you *can* use these commands, which then use ‘ediff-vc-merge-internal’.

								So we don’t actually have to implement ‘ediff-magit-merge-internal’.

								Instead we provide the more useful command ‘magit-ediff-resolve’ which

								only shows yet-to-be resolved conflicts.


								File: magit.info,  Node: FAQ - Issues and Errors,  Prev: FAQ - How to ...?,  Up: FAQ


								A.2 FAQ - Issues and Errors

								===========================


								* Menu:


								* Magit is slow::

								* I changed several thousand files at once and now Magit is unusable::

								* I am having problems committing::

								* I am using MS Windows and cannot push with Magit::

								* I am using OS X and SOMETHING works in shell, but not in Magit: I am using OS X and SOMETHING works in shell but not in Magit.

								* Diffs contain control sequences::

								* Expanding a file to show the diff causes it to disappear::

								* Point is wrong in the COMMIT_EDITMSG buffer::

								* The mode-line information isn't always up-to-date::

								* A branch and tag sharing the same name breaks SOMETHING::

								* My Git hooks work on the command-line but not inside Magit::

								* git-commit-mode isn't used when committing from the command-line::

								* Point ends up inside invisible text when jumping to a file-visiting buffer::


								File: magit.info,  Node: Magit is slow,  Next: I changed several thousand files at once and now Magit is unusable,  Up: FAQ - Issues and Errors


								A.2.1 Magit is slow

								-------------------


								See *note Performance::.


								File: magit.info,  Node: I changed several thousand files at once and now Magit is unusable,  Next: I am having problems committing,  Prev: Magit is slow,  Up: FAQ - Issues and Errors


								A.2.2 I changed several thousand files at once and now Magit is unusable

								------------------------------------------------------------------------


								Magit is *currently* not expected to work under such conditions.  It

								sure would be nice if it did, and v2.5 will hopefully be a big step into

								that direction.  But it might take until v3.1 to accomplish fully

								satisfactory performance, because that requires some heavy refactoring.


								   But for now we recommend you use the command line to complete this

								one commit.  Also see *note Performance::.


								File: magit.info,  Node: I am having problems committing,  Next: I am using MS Windows and cannot push with Magit,  Prev: I changed several thousand files at once and now Magit is unusable,  Up: FAQ - Issues and Errors


								A.2.3 I am having problems committing

								-------------------------------------


								That likely means that Magit is having problems finding an appropriate

								emacsclient executable.  See *note (with-editor)Configuring

								With-Editor:: and *note (with-editor)Debugging::.


								File: magit.info,  Node: I am using MS Windows and cannot push with Magit,  Next: I am using OS X and SOMETHING works in shell but not in Magit,  Prev: I am having problems committing,  Up: FAQ - Issues and Errors


								A.2.4 I am using MS Windows and cannot push with Magit

								------------------------------------------------------


								It’s almost certain that Magit is only incidental to this issue.  It is

								much more likely that this is a configuration issue, even if you can

								push on the command line.


								   Detailed setup instructions can be found at

								<https://github.com/magit/magit/wiki/Pushing-with-Magit-from-Windows>.


								File: magit.info,  Node: I am using OS X and SOMETHING works in shell but not in Magit,  Next: Diffs contain control sequences,  Prev: I am using MS Windows and cannot push with Magit,  Up: FAQ - Issues and Errors


								A.2.5 I am using OS X and SOMETHING works in shell, but not in Magit

								--------------------------------------------------------------------


								This usually occurs because Emacs doesn’t have the same environment

								variables as your shell.  Try installing and configuring

								<https://github.com/purcell/exec-path-from-shell>.  By default it

								synchronizes ‘$PATH’, which helps Magit find the same ‘git’ as the one

								you are using on the shell.


								   If SOMETHING is "passphrase caching with gpg-agent for commit and/or

								tag signing", then you’ll also need to synchronize ‘$GPG_AGENT_INFO’.


								File: magit.info,  Node: Diffs contain control sequences,  Next: Expanding a file to show the diff causes it to disappear,  Prev: I am using OS X and SOMETHING works in shell but not in Magit,  Up: FAQ - Issues and Errors


								A.2.6 Diffs contain control sequences

								-------------------------------------


								This happens when you configure Git to always color diffs and/or all of

								its output.  The valid values for relevant Git variables ‘color.ui’ and

								‘color.diff’ are ‘false’, ‘true’ and ‘always’, and the default is

								‘true’.  You should leave it that way because then you get colorful

								output in terminals by default but when git’s output is consumed by

								something else, then no color control sequences are used.


								   If you actually use some other tool that requires setting ‘color.ui’

								and/or ‘color.diff’ to ‘always’ (which is highly unlikely), then you can

								override these settings just for Magit by using:


								     (setq magit-git-global-arguments

								           (nconc magit-git-global-arguments

								                  '("-c" "color.ui=false"

								                    "-c" "color.diff=false")))


								File: magit.info,  Node: Expanding a file to show the diff causes it to disappear,  Next: Point is wrong in the COMMIT_EDITMSG buffer,  Prev: Diffs contain control sequences,  Up: FAQ - Issues and Errors


								A.2.7 Expanding a file to show the diff causes it to disappear

								--------------------------------------------------------------


								This is probably caused by a change of a ‘diff.*’ Git variable.  You

								probably set that variable for a reason, and should therefore only undo

								that setting in Magit by customizing ‘magit-git-global-arguments’.


								File: magit.info,  Node: Point is wrong in the COMMIT_EDITMSG buffer,  Next: The mode-line information isn't always up-to-date,  Prev: Expanding a file to show the diff causes it to disappear,  Up: FAQ - Issues and Errors


								A.2.8 Point is wrong in the ‘COMMIT_EDITMSG’ buffer

								---------------------------------------------------


								Neither Magit nor ‘git-commit‘ fiddle with point in the buffer used to

								write commit messages, so something else must be doing it.


								   You have probably globally enabled a mode which does restore point in

								file-visiting buffers.  It might be a bit surprising, but when you write

								a commit message, then you are actually editing a file.


								   So you have to figure out which package is doing.  ‘saveplace’,

								‘pointback’, and ‘session’ are likely candidates.  These snippets might

								help:


								     (setq session-name-disable-regexp "\\(?:\\`'\\.git/[A-Z_]+\\'\\)")


								     (with-eval-after-load 'pointback

								       (lambda ()

								         (when (or git-commit-mode git-rebase-mode)

								           (pointback-mode -1))))


								File: magit.info,  Node: The mode-line information isn't always up-to-date,  Next: A branch and tag sharing the same name breaks SOMETHING,  Prev: Point is wrong in the COMMIT_EDITMSG buffer,  Up: FAQ - Issues and Errors


								A.2.9 The mode-line information isn’t always up-to-date

								-------------------------------------------------------


								Magit is not responsible for the version control information that is

								being displayed in the mode-line and looks something like ‘Git-master’.

								The built-in "Version Control" package, also known as "VC", updates that

								information, and can be told to do so more often:


								     (setq auto-revert-check-vc-info t)


								   But doing so isn’t good for performance.  For more (overly

								optimistic) information see *note (emacs)VC Mode Line::.


								   If you don’t really care about seeing that information in the

								mode-line, but just don’t want to see _incorrect_ information, then

								consider disabling VC when using Git:


								     (setq vc-handled-backends (delq 'Git vc-handled-backends))


								   Or to disable it completely:


								     (setq vc-handled-backends nil)


								File: magit.info,  Node: A branch and tag sharing the same name breaks SOMETHING,  Next: My Git hooks work on the command-line but not inside Magit,  Prev: The mode-line information isn't always up-to-date,  Up: FAQ - Issues and Errors


								A.2.10 A branch and tag sharing the same name breaks SOMETHING

								--------------------------------------------------------------


								Or more generally, ambiguous refnames break SOMETHING.


								   Magit assumes that refs are named non-ambiguously across the

								"refs/heads/", "refs/tags/", and "refs/remotes/" namespaces (i.e., all

								the names remain unique when those prefixes are stripped).  We consider

								ambiguous refnames unsupported and recommend that you use a

								non-ambiguous naming scheme.  However, if you do work with a repository

								that has ambiguous refnames, please report any issues you encounter so

								that we can investigate whether there is a simple fix.


								File: magit.info,  Node: My Git hooks work on the command-line but not inside Magit,  Next: git-commit-mode isn't used when committing from the command-line,  Prev: A branch and tag sharing the same name breaks SOMETHING,  Up: FAQ - Issues and Errors


								A.2.11 My Git hooks work on the command-line but not inside Magit

								-----------------------------------------------------------------


								When Magit calls ‘git’ it adds a few global arguments including

								‘--literal-pathspecs’ and the ‘git’ process started by Magit then passes

								that setting on to other ‘git’ process it starts itself.  It does so by

								setting the environment variable ‘GIT_LITERAL_PATHSPECS’, not by calling

								subprocesses with the ‘--literal-pathspecs’.  You can therefore override

								this setting in hook scripts using ‘unset GIT_LITERAL_PATHSPECS’.


								File: magit.info,  Node: git-commit-mode isn't used when committing from the command-line,  Next: Point ends up inside invisible text when jumping to a file-visiting buffer,  Prev: My Git hooks work on the command-line but not inside Magit,  Up: FAQ - Issues and Errors


								A.2.12 ‘git-commit-mode’ isn’t used when committing from the command-line

								-------------------------------------------------------------------------


								The reason for this is that ‘git-commit.el’ has not been loaded yet

								and/or that the server has not been started yet.  These things have

								always already been taken care of when you commit from Magit because in

								order to do so, Magit has to be loaded and doing that involves loading

								‘git-commit’ and starting the server.


								   If you want to commit from the command-line, then you have to take

								care of these things yourself.  Your ‘init.el’ file should contain:


								     (require 'git-commit)

								     (server-mode)


								   Instead of ‘(require ’git-commit)‘ you may also use:


								     (load "/path/to/magit-autoloads.el")


								   You might want to do that because loading ‘git-commit’ causes large

								parts of Magit to be loaded.


								   There are also some variations of ‘(server-mode)’ that you might want

								to try.  Personally I use:


								     (use-package server

								       :config (or (server-running-p) (server-mode)))


								   Now you can use:


								     $ emacs&

								     $ EDITOR=emacsclient git commit


								   However you cannot use:


								     $ killall emacs

								     $ EDITOR="emacsclient --alternate-editor emacs" git commit


								   This will actually end up using ‘emacs’, not ‘emacsclient’.  If you

								do this, then can still edit the commit message but ‘git-commit-mode’

								won’t be used and you have to exit ‘emacs’ to finish the process.


								   Tautology ahead.  If you want to be able to use ‘emacsclient’ to

								connect to a running ‘emacs’ instance, even though no ‘emacs’ instance

								is running, then you cannot use ‘emacsclient’ directly.


								   Instead you have to create a script that does something like this:


								   Try to use ‘emacsclient’ (without using ‘--alternate-editor’).  If

								that succeeds, do nothing else.  Otherwise start ‘emacs &’ (and

								‘init.el’ must call ‘server-start’) and try to use ‘emacsclient’ again.


								File: magit.info,  Node: Point ends up inside invisible text when jumping to a file-visiting buffer,  Prev: git-commit-mode isn't used when committing from the command-line,  Up: FAQ - Issues and Errors


								A.2.13 Point ends up inside invisible text when jumping to a file-visiting buffer

								---------------------------------------------------------------------------------


								This can happen when you type ‘RET’ on a hunk to visit the respective

								file at the respective position.  One solution to this problem is to use

								‘global-reveal-mode’.  It makes sure that text around point is always

								visible.  If that is too drastic for your taste, then you may instead

								use ‘magit-diff-visit-file-hook’ to reveal the text, possibly using

								‘reveal-post-command’ or for Org buffers ‘org-reveal’.


								File: magit.info,  Node: Debugging Tools,  Next: Keystroke Index,  Prev: FAQ,  Up: Top


								B Debugging Tools

								*****************


								Magit and its dependencies provide a few debugging tools, and we

								appreciate it very much if you use those tools before reporting an

								issue.  Please include all relevant output when reporting an issue.


								‘M-x magit-version’     (‘magit-version’)


								     This command shows the currently used versions of Magit, Git, and

								     Emacs in the echo area.  Non-interactively this just returns the

								     Magit version.


								‘M-x magit-emacs-Q-command’     (‘magit-emacs-Q-command’)


								     This command shows a debugging shell command in the echo area and

								     adds it to the kill ring.  Paste that command into a shell and run

								     it.


								     This shell command starts ‘emacs’ with only ‘magit’ and its

								     dependencies loaded.  Neither your configuration nor other

								     installed packages are loaded.  This makes it easier to determine

								     whether some issue lays with Magit or something else.


								     If you run Magit from its Git repository, then you should be able

								     to use ‘make emacs-Q’ instead of the output of this command.


								‘M-x magit-debug-git-executable’     (‘magit-debug-git-executable’)


								     This command displays a buffer containing information about the

								     available and used ‘git’ executable(s), and can be useful when

								     investigating ‘exec-path’ issues.


								     Also see *note Git Executable::.


								‘M-x with-editor-debug’     (‘with-editor-debug’)


								     This command displays a buffer containing information about the

								     available and used ‘~emacsclient’ executable(s), and can be useful

								     when investigating why Magit (or rather ‘with-editor’) cannot find

								     an appropriate ‘emacsclient’ executable.


								     Also see *note (with-editor)Debugging::.


								   Please also see the *note FAQ::.


								File: magit.info,  Node: Keystroke Index,  Next: Command Index,  Prev: Debugging Tools,  Up: Top


								Appendix C Keystroke Index

								**************************


								[index]

								* Menu:


								* !:                                     Running Git Manually.

								                                                              (line  12)

								* ! !:                                   Running Git Manually.

								                                                              (line  17)

								* ! a:                                   Running Git Manually.

								                                                              (line  58)

								* ! b:                                   Running Git Manually.

								                                                              (line  62)

								* ! g:                                   Running Git Manually.

								                                                              (line  66)

								* ! k:                                   Running Git Manually.

								                                                              (line  54)

								* ! p:                                   Running Git Manually.

								                                                              (line  25)

								* ! s:                                   Running Git Manually.

								                                                              (line  35)

								* ! S:                                   Running Git Manually.

								                                                              (line  40)

								* $:                                     Viewing Git Output.  (line  16)

								* %:                                     Worktree.            (line   8)

								* % b:                                   Worktree.            (line  13)

								* % c:                                   Worktree.            (line  17)

								* % g:                                   Worktree.            (line  26)

								* % k:                                   Worktree.            (line  21)

								* +:                                     Log Buffer.          (line  61)

								* + <1>:                                 Refreshing Diffs.    (line  69)

								* -:                                     Log Buffer.          (line  65)

								* - <1>:                                 Refreshing Diffs.    (line  65)

								* 0:                                     Refreshing Diffs.    (line  73)

								* 1:                                     Section Visibility.  (line  26)

								* 2:                                     Section Visibility.  (line  27)

								* 3:                                     Section Visibility.  (line  28)

								* 4:                                     Section Visibility.  (line  29)

								* =:                                     Log Buffer.          (line  55)

								* ^:                                     Section Movement.    (line  31)

								* a:                                     Applying.            (line  33)

								* A:                                     Cherry Picking.      (line   8)

								* A A:                                   Cherry Picking.      (line  17)

								* A a:                                   Cherry Picking.      (line  24)

								* A A <1>:                               Cherry Picking.      (line  90)

								* A a <1>:                               Cherry Picking.      (line  98)

								* A d:                                   Cherry Picking.      (line  54)

								* A h:                                   Cherry Picking.      (line  42)

								* A n:                                   Cherry Picking.      (line  65)

								* A s:                                   Cherry Picking.      (line  76)

								* A s <1>:                               Cherry Picking.      (line  94)

								* B:                                     Bisecting.           (line   8)

								* b:                                     Blaming.             (line 105)

								* b <1>:                                 Branch Commands.     (line  12)

								* b <2>:                                 Editing Rebase Sequences.

								                                                              (line  85)

								* B B:                                   Bisecting.           (line  16)

								* B b:                                   Bisecting.           (line  31)

								* b b:                                   Branch Commands.     (line  49)

								* b C:                                   Branch Commands.     (line  29)

								* b c:                                   Branch Commands.     (line  67)

								* B g:                                   Bisecting.           (line  36)

								* B k:                                   Bisecting.           (line  41)

								* b k:                                   Branch Commands.     (line 147)

								* b l:                                   Branch Commands.     (line  74)

								* b n:                                   Branch Commands.     (line  57)

								* B r:                                   Bisecting.           (line  47)

								* b r:                                   Branch Commands.     (line 153)

								* B s:                                   Bisecting.           (line  24)

								* b s:                                   Branch Commands.     (line  97)

								* b S:                                   Branch Commands.     (line 125)

								* b x:                                   Branch Commands.     (line 131)

								* c:                                     Blaming.             (line 138)

								* C:                                     Cloning Repository.  (line  20)

								* c <1>:                                 Initiating a Commit. (line   8)

								* c <2>:                                 Editing Rebase Sequences.

								                                                              (line  72)

								* c a:                                   Initiating a Commit. (line  19)

								* c A:                                   Initiating a Commit. (line  67)

								* C b:                                   Cloning Repository.  (line  41)

								* C C:                                   Cloning Repository.  (line  29)

								* c c:                                   Initiating a Commit. (line  14)

								* C d:                                   Cloning Repository.  (line  54)

								* C e:                                   Cloning Repository.  (line  61)

								* c e:                                   Initiating a Commit. (line  23)

								* c f:                                   Initiating a Commit. (line  43)

								* c F:                                   Initiating a Commit. (line  51)

								* C m:                                   Cloning Repository.  (line  46)

								* C s:                                   Cloning Repository.  (line  34)

								* c s:                                   Initiating a Commit. (line  55)

								* c S:                                   Initiating a Commit. (line  63)

								* c w:                                   Initiating a Commit. (line  33)

								* C-<return>:                            Visiting Files and Blobs from a Diff.

								                                                              (line  51)

								* C-<tab>:                               Section Visibility.  (line  13)

								* C-c C-a:                               Editing Commit Messages.

								                                                              (line 128)

								* C-c C-b:                               Log Buffer.          (line  21)

								* C-c C-b <1>:                           Refreshing Diffs.    (line  91)

								* C-c C-c:                               Transient Commands.  (line  18)

								* C-c C-c <1>:                           Select from Log.     (line  20)

								* C-c C-c <2>:                           Editing Commit Messages.

								                                                              (line  19)

								* C-c C-c <3>:                           Editing Rebase Sequences.

								                                                              (line   6)

								* C-c C-d:                               Refreshing Diffs.    (line  81)

								* C-c C-d <1>:                           Editing Commit Messages.

								                                                              (line  57)

								* C-c C-e:                               Commands Available in Diffs.

								                                                              (line  25)

								* C-c C-f:                               Log Buffer.          (line  25)

								* C-c C-f <1>:                           Refreshing Diffs.    (line  95)

								* C-c C-i:                               Editing Commit Messages.

								                                                              (line 153)

								* C-c C-k:                               Select from Log.     (line  26)

								* C-c C-k <1>:                           Editing Commit Messages.

								                                                              (line  24)

								* C-c C-k <2>:                           Editing Rebase Sequences.

								                                                              (line  11)

								* C-c C-n:                               Log Buffer.          (line  29)

								* C-c C-o:                               Editing Commit Messages.

								                                                              (line 144)

								* C-c C-p:                               Editing Commit Messages.

								                                                              (line 148)

								* C-c C-r:                               Editing Commit Messages.

								                                                              (line 132)

								* C-c C-s:                               Editing Commit Messages.

								                                                              (line 136)

								* C-c C-t:                               Commands Available in Diffs.

								                                                              (line  14)

								* C-c C-t <1>:                           Editing Commit Messages.

								                                                              (line 140)

								* C-c C-w:                               Editing Commit Messages.

								                                                              (line  63)

								* C-c M-g:                               Minor Mode for Buffers Visiting Files.

								                                                              (line  54)

								* C-c M-g B:                             Blaming.             (line  21)

								* C-c M-g b:                             Blaming.             (line  32)

								* C-c M-g B <1>:                         Minor Mode for Buffers Visiting Files.

								                                                              (line 123)

								* C-c M-g B b:                           Blaming.             (line  33)

								* C-c M-g B e:                           Blaming.             (line  67)

								* C-c M-g B f:                           Blaming.             (line  58)

								* C-c M-g B r:                           Blaming.             (line  49)

								* C-c M-g c:                             Minor Mode for Buffers Visiting Files.

								                                                              (line  68)

								* C-c M-g D:                             Minor Mode for Buffers Visiting Files.

								                                                              (line  75)

								* C-c M-g d:                             Minor Mode for Buffers Visiting Files.

								                                                              (line  86)

								* C-c M-g e:                             Blaming.             (line  66)

								* C-c M-g e <1>:                         Minor Mode for Buffers Visiting Files.

								                                                              (line 136)

								* C-c M-g f:                             Blaming.             (line  57)

								* C-c M-g L:                             Minor Mode for Buffers Visiting Files.

								                                                              (line  96)

								* C-c M-g l:                             Minor Mode for Buffers Visiting Files.

								                                                              (line 107)

								* C-c M-g p:                             Minor Mode for Buffers Visiting Files.

								                                                              (line 146)

								* C-c M-g r:                             Blaming.             (line  48)

								* C-c M-g s:                             Minor Mode for Buffers Visiting Files.

								                                                              (line  59)

								* C-c M-g t:                             Minor Mode for Buffers Visiting Files.

								                                                              (line 114)

								* C-c M-g u:                             Minor Mode for Buffers Visiting Files.

								                                                              (line  63)

								* C-c M-s:                               Editing Commit Messages.

								                                                              (line  35)

								* C-w:                                   Common Commands.     (line  27)

								* C-x g:                                 Status Buffer.       (line  22)

								* C-x u:                                 Editing Rebase Sequences.

								                                                              (line  94)

								* d:                                     Diffing.             (line  21)

								* D:                                     Refreshing Diffs.    (line  11)

								* d c:                                   Diffing.             (line  69)

								* d d:                                   Diffing.             (line  27)

								* D f:                                   Refreshing Diffs.    (line  46)

								* D F:                                   Refreshing Diffs.    (line  51)

								* D g:                                   Refreshing Diffs.    (line  17)

								* d p:                                   Diffing.             (line  61)

								* d r:                                   Diffing.             (line  31)

								* D r:                                   Refreshing Diffs.    (line  41)

								* d s:                                   Diffing.             (line  51)

								* D s:                                   Refreshing Diffs.    (line  22)

								* d t:                                   Diffing.             (line  74)

								* D t:                                   Refreshing Diffs.    (line  37)

								* d u:                                   Diffing.             (line  57)

								* d w:                                   Diffing.             (line  45)

								* D w:                                   Refreshing Diffs.    (line  29)

								* DEL:                                   Log Buffer.          (line  45)

								* DEL <1>:                               Commands Available in Diffs.

								                                                              (line  60)

								* DEL <2>:                               Blaming.             (line  92)

								* DEL <3>:                               Editing Rebase Sequences.

								                                                              (line  28)

								* e:                                     Ediffing.            (line   9)

								* E:                                     Ediffing.            (line  21)

								* e <1>:                                 Editing Rebase Sequences.

								                                                              (line  55)

								* E c:                                   Ediffing.            (line  65)

								* E i:                                   Ediffing.            (line  57)

								* E m:                                   Ediffing.            (line  35)

								* E r:                                   Ediffing.            (line  26)

								* E s:                                   Ediffing.            (line  48)

								* E u:                                   Ediffing.            (line  53)

								* E w:                                   Ediffing.            (line  61)

								* E z:                                   Ediffing.            (line  69)

								* f:                                     Editing Rebase Sequences.

								                                                              (line  63)

								* f <1>:                                 Fetching.            (line   9)

								* F:                                     Pulling.             (line   9)

								* f a:                                   Fetching.            (line  46)

								* f C:                                   Branch Commands.     (line  30)

								* F C:                                   Branch Commands.     (line  31)

								* f e:                                   Fetching.            (line  32)

								* F e:                                   Pulling.             (line  31)

								* f m:                                   Fetching.            (line  50)

								* f o:                                   Fetching.            (line  36)

								* f p:                                   Fetching.            (line  15)

								* F p:                                   Pulling.             (line  14)

								* f r:                                   Fetching.            (line  41)

								* f u:                                   Fetching.            (line  24)

								* F u:                                   Pulling.             (line  23)

								* g:                                     Automatic Refreshing of Magit Buffers.

								                                                              (line  24)

								* G:                                     Automatic Refreshing of Magit Buffers.

								                                                              (line  33)

								* j:                                     Commands Available in Diffs.

								                                                              (line  45)

								* k:                                     Viewing Git Output.  (line  24)

								* k <1>:                                 Applying.            (line  40)

								* k <2>:                                 Editing Rebase Sequences.

								                                                              (line  68)

								* k <3>:                                 Stashing.            (line  96)

								* l:                                     Logging.             (line  29)

								* L:                                     Refreshing Logs.     (line  11)

								* L <1>:                                 Log Buffer.          (line   6)

								* L <2>:                                 Log Margin.          (line  47)

								* l <1>:                                 Editing Rebase Sequences.

								                                                              (line 115)

								* l a:                                   Logging.             (line  60)

								* l b:                                   Logging.             (line  56)

								* L d:                                   Log Margin.          (line  64)

								* L g:                                   Refreshing Logs.     (line  17)

								* l h:                                   Logging.             (line  48)

								* l H:                                   Reflog.              (line  19)

								* l l:                                   Logging.             (line  35)

								* l L:                                   Logging.             (line  52)

								* L L:                                   Log Margin.          (line  56)

								* L l:                                   Log Margin.          (line  60)

								* l o:                                   Logging.             (line  41)

								* l O:                                   Reflog.              (line  15)

								* l r:                                   Reflog.              (line  11)

								* L s:                                   Refreshing Logs.     (line  22)

								* L t:                                   Refreshing Logs.     (line  37)

								* L w:                                   Refreshing Logs.     (line  29)

								* m:                                     Merging.             (line   9)

								* M:                                     Remote Commands.     (line  13)

								* m a:                                   Merging.             (line  45)

								* m a <1>:                               Merging.             (line  95)

								* M a:                                   Remote Commands.     (line  50)

								* M C:                                   Remote Commands.     (line  33)

								* m e:                                   Merging.             (line  31)

								* m i:                                   Merging.             (line  58)

								* M k:                                   Remote Commands.     (line  65)

								* m m:                                   Merging.             (line  18)

								* m m <1>:                               Merging.             (line  89)

								* m n:                                   Merging.             (line  38)

								* m p:                                   Merging.             (line  81)

								* M p:                                   Remote Commands.     (line  69)

								* M P:                                   Remote Commands.     (line  74)

								* M r:                                   Remote Commands.     (line  55)

								* m s:                                   Merging.             (line  72)

								* M u:                                   Remote Commands.     (line  60)

								* M-1:                                   Section Visibility.  (line  33)

								* M-2:                                   Section Visibility.  (line  34)

								* M-3:                                   Section Visibility.  (line  35)

								* M-4:                                   Section Visibility.  (line  36)

								* M-<tab>:                               Section Visibility.  (line  17)

								* M-n:                                   Section Movement.    (line  26)

								* M-n <1>:                               Editing Commit Messages.

								                                                              (line  45)

								* M-n <2>:                               Editing Rebase Sequences.

								                                                              (line  47)

								* M-p:                                   Section Movement.    (line  20)

								* M-p <1>:                               Editing Commit Messages.

								                                                              (line  39)

								* M-p <2>:                               Editing Rebase Sequences.

								                                                              (line  43)

								* M-w:                                   Blaming.             (line 130)

								* M-w <1>:                               Common Commands.     (line  10)

								* M-x magit-debug-git-executable:        Git Executable.      (line  45)

								* M-x magit-debug-git-executable <1>:    Debugging Tools.     (line  30)

								* M-x magit-describe-section-briefly:    Section Types and Values.

								                                                              (line  13)

								* M-x magit-describe-section-briefly <1>: Matching Sections.  (line   6)

								* M-x magit-emacs-Q-command:             Debugging Tools.     (line  16)

								* M-x magit-init:                        Creating Repository. (line   6)

								* M-x magit-reset-index:                 Staging and Unstaging.

								                                                              (line  87)

								* M-x magit-reverse-in-index:            Staging and Unstaging.

								                                                              (line  62)

								* M-x magit-stage-file:                  Staging from File-Visiting Buffers.

								                                                              (line  10)

								* M-x magit-toggle-buffer-lock:          Modes and Buffers.   (line  17)

								* M-x magit-unstage-file:                Staging from File-Visiting Buffers.

								                                                              (line  18)

								* M-x magit-version:                     Git Executable.      (line  17)

								* M-x magit-version <1>:                 Debugging Tools.     (line  10)

								* M-x magit-wip-commit:                  Wip Modes.           (line  88)

								* M-x with-editor-debug:                 Debugging Tools.     (line  38)

								* MM:                                    Editing Rebase Sequences.

								                                                              (line 125)

								* Mt:                                    Editing Rebase Sequences.

								                                                              (line 132)

								* n:                                     Section Movement.    (line  16)

								* n <1>:                                 Blaming.             (line 109)

								* N:                                     Blaming.             (line 113)

								* n <2>:                                 Editing Rebase Sequences.

								                                                              (line  39)

								* n <3>:                                 Minor Mode for Buffers Visiting Blobs.

								                                                              (line  16)

								* o:                                     Submodule Transient. (line   6)

								* O:                                     Subtree.             (line   8)

								* o a:                                   Submodule Transient. (line  20)

								* o d:                                   Submodule Transient. (line  50)

								* O e:                                   Subtree.             (line  42)

								* O e p:                                 Subtree.             (line  54)

								* O e s:                                 Subtree.             (line  59)

								* o f:                                   Submodule Transient. (line  58)

								* O i:                                   Subtree.             (line  13)

								* O i a:                                 Subtree.             (line  25)

								* O i c:                                 Subtree.             (line  30)

								* O i f:                                 Subtree.             (line  38)

								* O i m:                                 Subtree.             (line  34)

								* o l:                                   Submodule Transient. (line  54)

								* o p:                                   Submodule Transient. (line  34)

								* o r:                                   Submodule Transient. (line  27)

								* o s:                                   Submodule Transient. (line  44)

								* o u:                                   Submodule Transient. (line  39)

								* p:                                     Section Movement.    (line  10)

								* p <1>:                                 Blaming.             (line 117)

								* P:                                     Blaming.             (line 121)

								* p <2>:                                 Editing Rebase Sequences.

								                                                              (line  35)

								* P <1>:                                 Pushing.             (line   9)

								* p <3>:                                 Minor Mode for Buffers Visiting Blobs.

								                                                              (line  12)

								* P C:                                   Branch Commands.     (line  32)

								* P e:                                   Pushing.             (line  31)

								* P m:                                   Pushing.             (line  50)

								* P o:                                   Pushing.             (line  36)

								* P p:                                   Pushing.             (line  15)

								* P r:                                   Pushing.             (line  41)

								* P t:                                   Pushing.             (line  58)

								* P T:                                   Pushing.             (line  66)

								* P u:                                   Pushing.             (line  23)

								* q:                                     Quitting Windows.    (line   6)

								* q <1>:                                 Log Buffer.          (line  14)

								* q <2>:                                 Blaming.             (line 125)

								* q <3>:                                 Minor Mode for Buffers Visiting Blobs.

								                                                              (line  20)

								* r:                                     Rebasing.            (line   9)

								* r <1>:                                 Editing Rebase Sequences.

								                                                              (line  51)

								* r a:                                   Rebasing.            (line 124)

								* r e:                                   Rebasing.            (line  45)

								* r e <1>:                               Rebasing.            (line 119)

								* r f:                                   Rebasing.            (line  85)

								* r i:                                   Rebasing.            (line  81)

								* r k:                                   Rebasing.            (line 100)

								* r m:                                   Rebasing.            (line  90)

								* r p:                                   Rebasing.            (line  28)

								* r r:                                   Rebasing.            (line 107)

								* r s:                                   Rebasing.            (line  51)

								* r s <1>:                               Rebasing.            (line 114)

								* r u:                                   Rebasing.            (line  37)

								* r w:                                   Rebasing.            (line  95)

								* RET:                                   References Buffer.   (line 179)

								* RET <1>:                               Visiting Files and Blobs from a Diff.

								                                                              (line   8)

								* RET <2>:                               Blaming.             (line  78)

								* RET <3>:                               Editing Rebase Sequences.

								                                                              (line  16)

								* s:                                     Staging and Unstaging.

								                                                              (line  28)

								* S:                                     Staging and Unstaging.

								                                                              (line  36)

								* s <1>:                                 Editing Rebase Sequences.

								                                                              (line  59)

								* S-<tab>:                               Section Visibility.  (line  22)

								* SPC:                                   Log Buffer.          (line  35)

								* SPC <1>:                               Commands Available in Diffs.

								                                                              (line  56)

								* SPC <2>:                               Blaming.             (line  82)

								* SPC <3>:                               Editing Rebase Sequences.

								                                                              (line  21)

								* t:                                     Editing Rebase Sequences.

								                                                              (line 119)

								* t <1>:                                 Tagging.             (line   8)

								* T:                                     Notes.               (line   8)

								* T a:                                   Notes.               (line  52)

								* T c:                                   Notes.               (line  47)

								* t k:                                   Tagging.             (line  40)

								* T m:                                   Notes.               (line  38)

								* t p:                                   Tagging.             (line  47)

								* T p:                                   Notes.               (line  30)

								* t r:                                   Tagging.             (line  19)

								* T r:                                   Notes.               (line  22)

								* t t:                                   Tagging.             (line  14)

								* T T:                                   Notes.               (line  14)

								* TAB:                                   Section Visibility.  (line   9)

								* u:                                     Staging and Unstaging.

								                                                              (line  43)

								* U:                                     Staging and Unstaging.

								                                                              (line  52)

								* v:                                     Applying.            (line  44)

								* V:                                     Reverting.           (line   6)

								* V A:                                   Reverting.           (line  31)

								* V a:                                   Reverting.           (line  39)

								* V s:                                   Reverting.           (line  35)

								* V V:                                   Reverting.           (line  15)

								* V v:                                   Reverting.           (line  21)

								* W:                                     Plain Patches.       (line   6)

								* w:                                     Maildir Patches.     (line   8)

								* w a:                                   Plain Patches.       (line  21)

								* w a <1>:                               Maildir Patches.     (line  25)

								* w a <2>:                               Maildir Patches.     (line  43)

								* W c:                                   Plain Patches.       (line  12)

								* w m:                                   Maildir Patches.     (line  21)

								* W s:                                   Plain Patches.       (line  28)

								* w s:                                   Maildir Patches.     (line  38)

								* w w:                                   Maildir Patches.     (line  14)

								* w w <1>:                               Maildir Patches.     (line  34)

								* x:                                     Editing Rebase Sequences.

								                                                              (line  76)

								* x <1>:                                 Resetting.           (line   8)

								* X f:                                   Resetting.           (line  44)

								* X h:                                   Resetting.           (line  26)

								* X i:                                   Resetting.           (line  31)

								* X m:                                   Resetting.           (line  15)

								* X s:                                   Resetting.           (line  20)

								* X w:                                   Resetting.           (line  38)

								* X w <1>:                               Wip Modes.           (line  66)

								* Y:                                     Cherries.            (line  17)

								* y:                                     References Buffer.   (line   6)

								* y <1>:                                 Editing Rebase Sequences.

								                                                              (line  90)

								* y c:                                   References Buffer.   (line  26)

								* y o:                                   References Buffer.   (line  32)

								* y y:                                   References Buffer.   (line  21)

								* z:                                     Stashing.            (line   8)

								* z a:                                   Stashing.            (line  59)

								* z b:                                   Stashing.            (line  81)

								* z B:                                   Stashing.            (line  86)

								* z f:                                   Stashing.            (line  92)

								* z i:                                   Stashing.            (line  21)

								* z I:                                   Stashing.            (line  47)

								* z k:                                   Stashing.            (line  72)

								* z l:                                   Stashing.            (line 100)

								* z p:                                   Stashing.            (line  65)

								* z v:                                   Stashing.            (line  77)

								* z w:                                   Stashing.            (line  26)

								* z W:                                   Stashing.            (line  52)

								* z x:                                   Stashing.            (line  33)

								* z z:                                   Stashing.            (line  14)

								* z Z:                                   Stashing.            (line  40)


								File: magit.info,  Node: Command Index,  Next: Function Index,  Prev: Keystroke Index,  Up: Top


								Appendix D Command Index

								************************


								[index]

								* Menu:


								* forward-line:                          Editing Rebase Sequences.

								                                                              (line  39)

								* git-commit-ack:                        Editing Commit Messages.

								                                                              (line 128)

								* git-commit-cc:                         Editing Commit Messages.

								                                                              (line 144)

								* git-commit-next-message:               Editing Commit Messages.

								                                                              (line  45)

								* git-commit-prev-message:               Editing Commit Messages.

								                                                              (line  39)

								* git-commit-reported:                   Editing Commit Messages.

								                                                              (line 148)

								* git-commit-review:                     Editing Commit Messages.

								                                                              (line 132)

								* git-commit-save-message:               Editing Commit Messages.

								                                                              (line  35)

								* git-commit-signoff:                    Editing Commit Messages.

								                                                              (line 136)

								* git-commit-suggested:                  Editing Commit Messages.

								                                                              (line 153)

								* git-commit-test:                       Editing Commit Messages.

								                                                              (line 140)

								* git-rebase-backward-line:              Editing Rebase Sequences.

								                                                              (line  35)

								* git-rebase-break:                      Editing Rebase Sequences.

								                                                              (line  85)

								* git-rebase-edit:                       Editing Rebase Sequences.

								                                                              (line  55)

								* git-rebase-exec:                       Editing Rebase Sequences.

								                                                              (line  76)

								* git-rebase-fixup:                      Editing Rebase Sequences.

								                                                              (line  63)

								* git-rebase-insert:                     Editing Rebase Sequences.

								                                                              (line  90)

								* git-rebase-kill-line:                  Editing Rebase Sequences.

								                                                              (line  68)

								* git-rebase-label:                      Editing Rebase Sequences.

								                                                              (line 115)

								* git-rebase-merge:                      Editing Rebase Sequences.

								                                                              (line 125)

								* git-rebase-merge-toggle-editmsg:       Editing Rebase Sequences.

								                                                              (line 132)

								* git-rebase-move-line-down:             Editing Rebase Sequences.

								                                                              (line  47)

								* git-rebase-move-line-up:               Editing Rebase Sequences.

								                                                              (line  43)

								* git-rebase-pick:                       Editing Rebase Sequences.

								                                                              (line  72)

								* git-rebase-reset:                      Editing Rebase Sequences.

								                                                              (line 119)

								* git-rebase-reword:                     Editing Rebase Sequences.

								                                                              (line  51)

								* git-rebase-show-commit:                Editing Rebase Sequences.

								                                                              (line  16)

								* git-rebase-show-or-scroll-down:        Editing Rebase Sequences.

								                                                              (line  28)

								* git-rebase-show-or-scroll-up:          Editing Rebase Sequences.

								                                                              (line  21)

								* git-rebase-squash:                     Editing Rebase Sequences.

								                                                              (line  59)

								* git-rebase-undo:                       Editing Rebase Sequences.

								                                                              (line  94)

								* ido-enter-magit-status:                Status Buffer.       (line  72)

								* magit-am:                              Maildir Patches.     (line   8)

								* magit-am-abort:                        Maildir Patches.     (line  43)

								* magit-am-apply-maildir:                Maildir Patches.     (line  21)

								* magit-am-apply-patches:                Maildir Patches.     (line  14)

								* magit-am-continue:                     Maildir Patches.     (line  34)

								* magit-am-skip:                         Maildir Patches.     (line  38)

								* magit-apply:                           Applying.            (line  33)

								* magit-bisect:                          Bisecting.           (line   8)

								* magit-bisect-bad:                      Bisecting.           (line  31)

								* magit-bisect-good:                     Bisecting.           (line  36)

								* magit-bisect-reset:                    Bisecting.           (line  47)

								* magit-bisect-run:                      Bisecting.           (line  24)

								* magit-bisect-skip:                     Bisecting.           (line  41)

								* magit-bisect-start:                    Bisecting.           (line  16)

								* magit-blame:                           Blaming.             (line  21)

								* magit-blame <1>:                       Blaming.             (line 105)

								* magit-blame <2>:                       Minor Mode for Buffers Visiting Files.

								                                                              (line 123)

								* magit-blame-addition:                  Blaming.             (line  32)

								* magit-blame-addition <1>:              Blaming.             (line  33)

								* magit-blame-copy-hash:                 Blaming.             (line 130)

								* magit-blame-cycle-style:               Blaming.             (line 138)

								* magit-blame-echo:                      Blaming.             (line  66)

								* magit-blame-echo <1>:                  Blaming.             (line  67)

								* magit-blame-next-chunk:                Blaming.             (line 109)

								* magit-blame-next-chunk-same-commit:    Blaming.             (line 113)

								* magit-blame-previous-chunk:            Blaming.             (line 117)

								* magit-blame-previous-chunk-same-commit: Blaming.            (line 121)

								* magit-blame-quit:                      Blaming.             (line 125)

								* magit-blame-removal:                   Blaming.             (line  48)

								* magit-blame-removal <1>:               Blaming.             (line  49)

								* magit-blame-reverse:                   Blaming.             (line  57)

								* magit-blame-reverse <1>:               Blaming.             (line  58)

								* magit-blob-next:                       Minor Mode for Buffers Visiting Blobs.

								                                                              (line  16)

								* magit-blob-previous:                   Minor Mode for Buffers Visiting Files.

								                                                              (line 146)

								* magit-blob-previous <1>:               Minor Mode for Buffers Visiting Blobs.

								                                                              (line  12)

								* magit-branch:                          Branch Commands.     (line  12)

								* magit-branch-and-checkout:             Branch Commands.     (line  67)

								* magit-branch-checkout:                 Branch Commands.     (line  74)

								* magit-branch-configure:                Branch Commands.     (line  29)

								* magit-branch-configure <1>:            Branch Commands.     (line  30)

								* magit-branch-configure <2>:            Branch Commands.     (line  31)

								* magit-branch-configure <3>:            Branch Commands.     (line  32)

								* magit-branch-create:                   Branch Commands.     (line  57)

								* magit-branch-delete:                   Branch Commands.     (line 147)

								* magit-branch-or-checkout:              Branch Commands.     (line 257)

								* magit-branch-orphan:                   Branch Commands.     (line 252)

								* magit-branch-rename:                   Branch Commands.     (line 153)

								* magit-branch-reset:                    Branch Commands.     (line 131)

								* magit-branch-shelve:                   Auxiliary Branch Commands.

								                                                              (line   9)

								* magit-branch-spinoff:                  Branch Commands.     (line  97)

								* magit-branch-spinout:                  Branch Commands.     (line 125)

								* magit-branch-unshelve:                 Auxiliary Branch Commands.

								                                                              (line  20)

								* magit-checkout:                        Branch Commands.     (line  49)

								* magit-cherry:                          Cherries.            (line  17)

								* magit-cherry-apply:                    Cherry Picking.      (line  24)

								* magit-cherry-copy:                     Cherry Picking.      (line  17)

								* magit-cherry-donate:                   Cherry Picking.      (line  54)

								* magit-cherry-harvest:                  Cherry Picking.      (line  42)

								* magit-cherry-pick:                     Cherry Picking.      (line   8)

								* magit-cherry-spinoff:                  Cherry Picking.      (line  76)

								* magit-cherry-spinout:                  Cherry Picking.      (line  65)

								* magit-clone:                           Cloning Repository.  (line  20)

								* magit-clone-bare:                      Cloning Repository.  (line  41)

								* magit-clone-mirror:                    Cloning Repository.  (line  46)

								* magit-clone-regular:                   Cloning Repository.  (line  29)

								* magit-clone-shallow:                   Cloning Repository.  (line  34)

								* magit-clone-shallow-exclude:           Cloning Repository.  (line  61)

								* magit-clone-shallow-since:             Cloning Repository.  (line  54)

								* magit-commit:                          Initiating a Commit. (line   8)

								* magit-commit <1>:                      Minor Mode for Buffers Visiting Files.

								                                                              (line  68)

								* magit-commit-amend:                    Initiating a Commit. (line  19)

								* magit-commit-augment:                  Initiating a Commit. (line  67)

								* magit-commit-create:                   Initiating a Commit. (line  14)

								* magit-commit-extend:                   Initiating a Commit. (line  23)

								* magit-commit-fixup:                    Initiating a Commit. (line  43)

								* magit-commit-instant-fixup:            Initiating a Commit. (line  51)

								* magit-commit-instant-squash:           Initiating a Commit. (line  63)

								* magit-commit-reword:                   Initiating a Commit. (line  33)

								* magit-commit-squash:                   Initiating a Commit. (line  55)

								* magit-copy-buffer-revision:            Common Commands.     (line  27)

								* magit-copy-section-value:              Common Commands.     (line  10)

								* magit-cycle-margin-style:              Log Margin.          (line  60)

								* magit-debug-git-executable:            Git Executable.      (line  45)

								* magit-debug-git-executable <1>:        Debugging Tools.     (line  30)

								* magit-describe-section-briefly:        Section Types and Values.

								                                                              (line  13)

								* magit-describe-section-briefly <1>:    Matching Sections.   (line   6)

								* magit-diff:                            Diffing.             (line  21)

								* magit-diff <1>:                        Minor Mode for Buffers Visiting Files.

								                                                              (line  75)

								* magit-diff-buffer-file:                Minor Mode for Buffers Visiting Files.

								                                                              (line  86)

								* magit-diff-default-context:            Refreshing Diffs.    (line  73)

								* magit-diff-dwim:                       Diffing.             (line  27)

								* magit-diff-edit-hunk-commit:           Commands Available in Diffs.

								                                                              (line  25)

								* magit-diff-flip-revs:                  Refreshing Diffs.    (line  46)

								* magit-diff-less-context:               Refreshing Diffs.    (line  65)

								* magit-diff-more-context:               Refreshing Diffs.    (line  69)

								* magit-diff-paths:                      Diffing.             (line  61)

								* magit-diff-range:                      Diffing.             (line  31)

								* magit-diff-refresh:                    Refreshing Diffs.    (line  11)

								* magit-diff-refresh <1>:                Refreshing Diffs.    (line  17)

								* magit-diff-save-default-arguments:     Refreshing Diffs.    (line  29)

								* magit-diff-set-default-arguments:      Refreshing Diffs.    (line  22)

								* magit-diff-show-or-scroll-down:        Log Buffer.          (line  45)

								* magit-diff-show-or-scroll-down <1>:    Blaming.             (line  92)

								* magit-diff-show-or-scroll-up:          Log Buffer.          (line  35)

								* magit-diff-show-or-scroll-up <1>:      Blaming.             (line  82)

								* magit-diff-staged:                     Diffing.             (line  51)

								* magit-diff-switch-range-type:          Refreshing Diffs.    (line  41)

								* magit-diff-toggle-file-filter:         Refreshing Diffs.    (line  51)

								* magit-diff-toggle-refine-hunk:         Refreshing Diffs.    (line  37)

								* magit-diff-trace-definition:           Commands Available in Diffs.

								                                                              (line  14)

								* magit-diff-unstaged:                   Diffing.             (line  57)

								* magit-diff-visit-file:                 Visiting Files and Blobs from a Diff.

								                                                              (line   8)

								* magit-diff-visit-file-other-frame:     Visiting Files and Blobs from a Diff.

								                                                              (line  74)

								* magit-diff-visit-file-other-window:    Visiting Files and Blobs from a Diff.

								                                                              (line  73)

								* magit-diff-visit-file-worktree:        Visiting Files and Blobs from a Diff.

								                                                              (line  51)

								* magit-diff-visit-worktree-file-other-frame: Visiting Files and Blobs from a Diff.

								                                                              (line  76)

								* magit-diff-visit-worktree-file-other-window: Visiting Files and Blobs from a Diff.

								                                                              (line  75)

								* magit-diff-while-committing:           Refreshing Diffs.    (line  81)

								* magit-diff-while-committing <1>:       Editing Commit Messages.

								                                                              (line  57)

								* magit-diff-working-tree:               Diffing.             (line  45)

								* magit-discard:                         Applying.            (line  40)

								* magit-dispatch:                        Transient Commands.  (line  18)

								* magit-ediff:                           Ediffing.            (line  21)

								* magit-ediff-compare:                   Ediffing.            (line  26)

								* magit-ediff-dwim:                      Ediffing.            (line   9)

								* magit-ediff-resolve:                   Ediffing.            (line  35)

								* magit-ediff-show-commit:               Ediffing.            (line  65)

								* magit-ediff-show-staged:               Ediffing.            (line  57)

								* magit-ediff-show-stash:                Ediffing.            (line  69)

								* magit-ediff-show-unstaged:             Ediffing.            (line  53)

								* magit-ediff-show-working-tree:         Ediffing.            (line  61)

								* magit-ediff-stage:                     Ediffing.            (line  48)

								* magit-edit-line-commit:                Minor Mode for Buffers Visiting Files.

								                                                              (line 136)

								* magit-emacs-Q-command:                 Debugging Tools.     (line  16)

								* magit-fetch:                           Fetching.            (line   9)

								* magit-fetch-all:                       Fetching.            (line  46)

								* magit-fetch-branch:                    Fetching.            (line  36)

								* magit-fetch-from-pushremote:           Fetching.            (line  15)

								* magit-fetch-from-upstream:             Fetching.            (line  24)

								* magit-fetch-modules:                   Submodule Transient. (line  58)

								* magit-fetch-other:                     Fetching.            (line  32)

								* magit-fetch-refspec:                   Fetching.            (line  41)

								* magit-file-checkout:                   Resetting.           (line  44)

								* magit-file-checkout <1>:               Minor Mode for Buffers Visiting Files.

								                                                              (line 165)

								* magit-file-delete:                     Minor Mode for Buffers Visiting Files.

								                                                              (line 157)

								* magit-file-dispatch:                   Minor Mode for Buffers Visiting Files.

								                                                              (line  54)

								* magit-file-rename:                     Minor Mode for Buffers Visiting Files.

								                                                              (line 153)

								* magit-file-untrack:                    Minor Mode for Buffers Visiting Files.

								                                                              (line 161)

								* magit-find-file:                       General-Purpose Visit Commands.

								                                                              (line   9)

								* magit-find-file-other-frame:           General-Purpose Visit Commands.

								                                                              (line  21)

								* magit-find-file-other-window:          General-Purpose Visit Commands.

								                                                              (line  15)

								* magit-git-command:                     Running Git Manually.

								                                                              (line  25)

								* magit-git-command-topdir:              Running Git Manually.

								                                                              (line  17)

								* magit-go-backward:                     Log Buffer.          (line  21)

								* magit-go-backward <1>:                 Refreshing Diffs.    (line  91)

								* magit-go-forward:                      Log Buffer.          (line  25)

								* magit-go-forward <1>:                  Refreshing Diffs.    (line  95)

								* magit-init:                            Creating Repository. (line   6)

								* magit-jump-to-diffstat-or-diff:        Commands Available in Diffs.

								                                                              (line  45)

								* magit-kill-this-buffer:                Minor Mode for Buffers Visiting Blobs.

								                                                              (line  20)

								* magit-list-repositories:               Repository List.     (line   6)

								* magit-list-submodules:                 Listing Submodules.  (line  13)

								* magit-list-submodules <1>:             Submodule Transient. (line  54)

								* magit-log:                             Logging.             (line  29)

								* magit-log <1>:                         Minor Mode for Buffers Visiting Files.

								                                                              (line  96)

								* magit-log-all:                         Logging.             (line  60)

								* magit-log-all-branches:                Logging.             (line  56)

								* magit-log-branches:                    Logging.             (line  52)

								* magit-log-buffer-file:                 Minor Mode for Buffers Visiting Files.

								                                                              (line 107)

								* magit-log-bury-buffer:                 Log Buffer.          (line  14)

								* magit-log-current:                     Logging.             (line  35)

								* magit-log-double-commit-limit:         Log Buffer.          (line  61)

								* magit-log-half-commit-limit:           Log Buffer.          (line  65)

								* magit-log-head:                        Logging.             (line  48)

								* magit-log-move-to-parent:              Log Buffer.          (line  29)

								* magit-log-other:                       Logging.             (line  41)

								* magit-log-refresh:                     Refreshing Logs.     (line  11)

								* magit-log-refresh <1>:                 Refreshing Logs.     (line  17)

								* magit-log-refresh <2>:                 Log Buffer.          (line   6)

								* magit-log-save-default-arguments:      Refreshing Logs.     (line  29)

								* magit-log-select-pick:                 Select from Log.     (line  20)

								* magit-log-select-quit:                 Select from Log.     (line  26)

								* magit-log-set-default-arguments:       Refreshing Logs.     (line  22)

								* magit-log-toggle-commit-limit:         Log Buffer.          (line  55)

								* magit-log-trace-definition:            Minor Mode for Buffers Visiting Files.

								                                                              (line 114)

								* magit-margin-settings:                 Log Margin.          (line  47)

								* magit-merge:                           Merging.             (line   9)

								* magit-merge <1>:                       Merging.             (line  89)

								* magit-merge-abort:                     Merging.             (line  95)

								* magit-merge-absorb:                    Merging.             (line  45)

								* magit-merge-editmsg:                   Merging.             (line  31)

								* magit-merge-into:                      Merging.             (line  58)

								* magit-merge-nocommit:                  Merging.             (line  38)

								* magit-merge-plain:                     Merging.             (line  18)

								* magit-merge-preview:                   Merging.             (line  81)

								* magit-merge-squash:                    Merging.             (line  72)

								* magit-mode-bury-buffer:                Quitting Windows.    (line   6)

								* magit-notes:                           Notes.               (line   8)

								* magit-notes-edit:                      Notes.               (line  14)

								* magit-notes-merge:                     Notes.               (line  38)

								* magit-notes-merge-abort:               Notes.               (line  52)

								* magit-notes-merge-commit:              Notes.               (line  47)

								* magit-notes-prune:                     Notes.               (line  30)

								* magit-notes-remove:                    Notes.               (line  22)

								* magit-patch:                           Plain Patches.       (line   6)

								* magit-patch-apply:                     Plain Patches.       (line  21)

								* magit-patch-apply <1>:                 Maildir Patches.     (line  25)

								* magit-patch-create:                    Plain Patches.       (line  12)

								* magit-patch-save:                      Plain Patches.       (line  28)

								* magit-pop-revision-stack:              Editing Commit Messages.

								                                                              (line  63)

								* magit-process:                         Viewing Git Output.  (line  16)

								* magit-process-kill:                    Viewing Git Output.  (line  24)

								* magit-pull:                            Pulling.             (line   9)

								* magit-pull-branch:                     Pulling.             (line  31)

								* magit-pull-from-pushremote:            Pulling.             (line  14)

								* magit-pull-from-upstream:              Pulling.             (line  23)

								* magit-push:                            Pushing.             (line   9)

								* magit-push-current:                    Pushing.             (line  31)

								* magit-push-current-to-pushremote:      Pushing.             (line  15)

								* magit-push-current-to-upstream:        Pushing.             (line  23)

								* magit-push-implicitly args:            Pushing.             (line  74)

								* magit-push-matching:                   Pushing.             (line  50)

								* magit-push-other:                      Pushing.             (line  36)

								* magit-push-refspecs:                   Pushing.             (line  41)

								* magit-push-tag:                        Pushing.             (line  66)

								* magit-push-tags:                       Pushing.             (line  58)

								* magit-push-to-remote remote args:      Pushing.             (line  85)

								* magit-rebase:                          Rebasing.            (line   9)

								* magit-rebase-abort:                    Rebasing.            (line 124)

								* magit-rebase-autosquash:               Rebasing.            (line  85)

								* magit-rebase-branch:                   Rebasing.            (line  45)

								* magit-rebase-continue:                 Rebasing.            (line 107)

								* magit-rebase-edit:                     Rebasing.            (line 119)

								* magit-rebase-edit-commit:              Rebasing.            (line  90)

								* magit-rebase-interactive:              Rebasing.            (line  81)

								* magit-rebase-onto-pushremote:          Rebasing.            (line  28)

								* magit-rebase-onto-upstream:            Rebasing.            (line  37)

								* magit-rebase-remove-commit:            Rebasing.            (line 100)

								* magit-rebase-reword-commit:            Rebasing.            (line  95)

								* magit-rebase-skip:                     Rebasing.            (line 114)

								* magit-rebase-subset:                   Rebasing.            (line  51)

								* magit-reflog-current:                  Reflog.              (line  11)

								* magit-reflog-head:                     Reflog.              (line  19)

								* magit-reflog-other:                    Reflog.              (line  15)

								* magit-refresh:                         Automatic Refreshing of Magit Buffers.

								                                                              (line  24)

								* magit-refresh-all:                     Automatic Refreshing of Magit Buffers.

								                                                              (line  33)

								* magit-remote:                          Remote Commands.     (line  13)

								* magit-remote-add:                      Remote Commands.     (line  50)

								* magit-remote-configure:                Remote Commands.     (line  33)

								* magit-remote-prune:                    Remote Commands.     (line  69)

								* magit-remote-prune-refspecs:           Remote Commands.     (line  74)

								* magit-remote-remove:                   Remote Commands.     (line  65)

								* magit-remote-rename:                   Remote Commands.     (line  55)

								* magit-remote-set-url:                  Remote Commands.     (line  60)

								* magit-reset-hard:                      Resetting.           (line  26)

								* magit-reset-index:                     Staging and Unstaging.

								                                                              (line  87)

								* magit-reset-index <1>:                 Resetting.           (line  31)

								* magit-reset-mixed:                     Resetting.           (line  15)

								* magit-reset-quickly:                   Resetting.           (line   8)

								* magit-reset-soft:                      Resetting.           (line  20)

								* magit-reset-worktree:                  Resetting.           (line  38)

								* magit-reset-worktree <1>:              Wip Modes.           (line  66)

								* magit-reverse:                         Applying.            (line  44)

								* magit-reverse-in-index:                Staging and Unstaging.

								                                                              (line  62)

								* magit-revert:                          Reverting.           (line   6)

								* magit-revert-and-commit:               Reverting.           (line  15)

								* magit-revert-no-commit:                Reverting.           (line  21)

								* magit-run:                             Running Git Manually.

								                                                              (line  12)

								* magit-run-git-gui:                     Running Git Manually.

								                                                              (line  66)

								* magit-run-gitk:                        Running Git Manually.

								                                                              (line  54)

								* magit-run-gitk-all:                    Running Git Manually.

								                                                              (line  58)

								* magit-run-gitk-branches:               Running Git Manually.

								                                                              (line  62)

								* magit-section-backward:                Section Movement.    (line  10)

								* magit-section-backward-siblings:       Section Movement.    (line  20)

								* magit-section-cycle:                   Section Visibility.  (line  13)

								* magit-section-cycle-diffs:             Section Visibility.  (line  17)

								* magit-section-cycle-global:            Section Visibility.  (line  22)

								* magit-section-forward:                 Section Movement.    (line  16)

								* magit-section-forward-siblings:        Section Movement.    (line  26)

								* magit-section-hide:                    Section Visibility.  (line  49)

								* magit-section-hide-children:           Section Visibility.  (line  64)

								* magit-section-show:                    Section Visibility.  (line  45)

								* magit-section-show-children:           Section Visibility.  (line  58)

								* magit-section-show-headings:           Section Visibility.  (line  53)

								* magit-section-show-level-1:            Section Visibility.  (line  26)

								* magit-section-show-level-1-all:        Section Visibility.  (line  33)

								* magit-section-show-level-2:            Section Visibility.  (line  27)

								* magit-section-show-level-2-all:        Section Visibility.  (line  34)

								* magit-section-show-level-3:            Section Visibility.  (line  28)

								* magit-section-show-level-3-all:        Section Visibility.  (line  35)

								* magit-section-show-level-4:            Section Visibility.  (line  29)

								* magit-section-show-level-4-all:        Section Visibility.  (line  36)

								* magit-section-toggle:                  Section Visibility.  (line   9)

								* magit-section-toggle-children:         Section Visibility.  (line  68)

								* magit-section-up:                      Section Movement.    (line  31)

								* magit-sequence-abort:                  Cherry Picking.      (line  98)

								* magit-sequence-abort <1>:              Reverting.           (line  39)

								* magit-sequence-continue:               Cherry Picking.      (line  90)

								* magit-sequence-continue <1>:           Reverting.           (line  31)

								* magit-sequence-skip:                   Cherry Picking.      (line  94)

								* magit-sequence-skip <1>:               Reverting.           (line  35)

								* magit-shell-command:                   Running Git Manually.

								                                                              (line  40)

								* magit-shell-command-topdir:            Running Git Manually.

								                                                              (line  35)

								* magit-show-commit:                     Diffing.             (line  69)

								* magit-show-commit <1>:                 Blaming.             (line  78)

								* magit-show-refs:                       References Buffer.   (line   6)

								* magit-show-refs-current:               References Buffer.   (line  26)

								* magit-show-refs-head:                  References Buffer.   (line  21)

								* magit-show-refs-other:                 References Buffer.   (line  32)

								* magit-snapshot-both:                   Stashing.            (line  40)

								* magit-snapshot-index:                  Stashing.            (line  47)

								* magit-snapshot-worktree:               Stashing.            (line  52)

								* magit-stage:                           Staging and Unstaging.

								                                                              (line  28)

								* magit-stage-file:                      Staging from File-Visiting Buffers.

								                                                              (line  10)

								* magit-stage-file <1>:                  Minor Mode for Buffers Visiting Files.

								                                                              (line  59)

								* magit-stage-modified:                  Staging and Unstaging.

								                                                              (line  36)

								* magit-stash:                           Stashing.            (line   8)

								* magit-stash-apply:                     Stashing.            (line  59)

								* magit-stash-both:                      Stashing.            (line  14)

								* magit-stash-branch:                    Stashing.            (line  81)

								* magit-stash-branch-here:               Stashing.            (line  86)

								* magit-stash-clear:                     Stashing.            (line  96)

								* magit-stash-drop:                      Stashing.            (line  72)

								* magit-stash-format-patch:              Stashing.            (line  92)

								* magit-stash-index:                     Stashing.            (line  21)

								* magit-stash-keep-index:                Stashing.            (line  33)

								* magit-stash-list:                      Stashing.            (line 100)

								* magit-stash-pop:                       Stashing.            (line  65)

								* magit-stash-show:                      Diffing.             (line  74)

								* magit-stash-show <1>:                  Stashing.            (line  77)

								* magit-stash-worktree:                  Stashing.            (line  26)

								* magit-status:                          Status Buffer.       (line  22)

								* magit-submodule:                       Submodule Transient. (line   6)

								* magit-submodule-add:                   Submodule Transient. (line  20)

								* magit-submodule-fetch:                 Fetching.            (line  50)

								* magit-submodule-populate:              Submodule Transient. (line  34)

								* magit-submodule-register:              Submodule Transient. (line  27)

								* magit-submodule-synchronize:           Submodule Transient. (line  44)

								* magit-submodule-unpopulate:            Submodule Transient. (line  50)

								* magit-submodule-update:                Submodule Transient. (line  39)

								* magit-subtree:                         Subtree.             (line   8)

								* magit-subtree-add:                     Subtree.             (line  25)

								* magit-subtree-add-commit:              Subtree.             (line  30)

								* magit-subtree-export:                  Subtree.             (line  42)

								* magit-subtree-import:                  Subtree.             (line  13)

								* magit-subtree-merge:                   Subtree.             (line  34)

								* magit-subtree-pull:                    Subtree.             (line  38)

								* magit-subtree-push:                    Subtree.             (line  54)

								* magit-subtree-split:                   Subtree.             (line  59)

								* magit-tag:                             Tagging.             (line   8)

								* magit-tag-create:                      Tagging.             (line  14)

								* magit-tag-delete:                      Tagging.             (line  40)

								* magit-tag-prune:                       Tagging.             (line  47)

								* magit-tag-release:                     Tagging.             (line  19)

								* magit-toggle-buffer-lock:              Modes and Buffers.   (line  17)

								* magit-toggle-margin:                   Refreshing Logs.     (line  37)

								* magit-toggle-margin <1>:               Log Margin.          (line  56)

								* magit-toggle-margin-details:           Log Margin.          (line  64)

								* magit-unstage:                         Staging and Unstaging.

								                                                              (line  43)

								* magit-unstage-all:                     Staging and Unstaging.

								                                                              (line  52)

								* magit-unstage-file:                    Staging from File-Visiting Buffers.

								                                                              (line  18)

								* magit-unstage-file <1>:                Minor Mode for Buffers Visiting Files.

								                                                              (line  63)

								* magit-version:                         Git Executable.      (line  17)

								* magit-version <1>:                     Debugging Tools.     (line  10)

								* magit-visit-ref:                       References Buffer.   (line 179)

								* magit-wip-commit:                      Wip Modes.           (line  88)

								* magit-wip-log:                         Wip Modes.           (line  48)

								* magit-wip-log-current:                 Wip Modes.           (line  57)

								* magit-worktree:                        Worktree.            (line   8)

								* magit-worktree-branch:                 Worktree.            (line  17)

								* magit-worktree-checkout:               Worktree.            (line  13)

								* magit-worktree-delete:                 Worktree.            (line  21)

								* magit-worktree-status:                 Worktree.            (line  26)

								* scroll-down:                           Commands Available in Diffs.

								                                                              (line  60)

								* scroll-up:                             Commands Available in Diffs.

								                                                              (line  56)

								* with-editor-cancel:                    Editing Commit Messages.

								                                                              (line  24)

								* with-editor-cancel <1>:                Editing Rebase Sequences.

								                                                              (line  11)

								* with-editor-debug:                     Debugging Tools.     (line  38)

								* with-editor-finish:                    Editing Commit Messages.

								                                                              (line  19)

								* with-editor-finish <1>:                Editing Rebase Sequences.

								                                                              (line   6)


								File: magit.info,  Node: Function Index,  Next: Variable Index,  Prev: Command Index,  Up: Top


								Appendix E Function Index

								*************************


								[index]

								* Menu:


								* git-commit-check-style-conventions:    Editing Commit Messages.

								                                                              (line 247)

								* git-commit-propertize-diff:            Editing Commit Messages.

								                                                              (line 206)

								* git-commit-save-message:               Editing Commit Messages.

								                                                              (line 187)

								* git-commit-setup-changelog-support:    Editing Commit Messages.

								                                                              (line 191)

								* git-commit-turn-on-auto-fill:          Editing Commit Messages.

								                                                              (line 196)

								* git-commit-turn-on-flyspell:           Editing Commit Messages.

								                                                              (line 201)

								* ido-enter-magit-status:                Status Buffer.       (line  72)

								* magit-add-section-hook:                Section Hooks.       (line  20)

								* magit-after-save-refresh-status:       Automatic Refreshing of Magit Buffers.

								                                                              (line  58)

								* magit-branch-or-checkout:              Branch Commands.     (line 257)

								* magit-branch-orphan:                   Branch Commands.     (line 252)

								* magit-branch-shelve:                   Auxiliary Branch Commands.

								                                                              (line   9)

								* magit-branch-unshelve:                 Auxiliary Branch Commands.

								                                                              (line  20)

								* magit-builtin-completing-read:         Support for Completion Frameworks.

								                                                              (line  42)

								* magit-call-git:                        Calling Git for Effect.

								                                                              (line  28)

								* magit-call-process:                    Calling Git for Effect.

								                                                              (line  32)

								* magit-cancel-section:                  Creating Sections.   (line  71)

								* magit-completing-read:                 Support for Completion Frameworks.

								                                                              (line  60)

								* magit-current-section:                 Section Selection.   (line   6)

								* magit-define-section-jumper:           Creating Sections.   (line  77)

								* magit-diff-scope:                      Matching Sections.   (line 118)

								* magit-diff-type:                       Matching Sections.   (line  95)

								* magit-diff-visit-file-other-frame:     Visiting Files and Blobs from a Diff.

								                                                              (line  74)

								* magit-diff-visit-file-other-window:    Visiting Files and Blobs from a Diff.

								                                                              (line  73)

								* magit-diff-visit-worktree-file-other-frame: Visiting Files and Blobs from a Diff.

								                                                              (line  76)

								* magit-diff-visit-worktree-file-other-window: Visiting Files and Blobs from a Diff.

								                                                              (line  75)

								* magit-display-buffer:                  Switching Buffers.   (line   6)

								* magit-display-buffer-fullcolumn-most-v1: Switching Buffers. (line  76)

								* magit-display-buffer-fullframe-status-topleft-v1: Switching Buffers.

								                                                              (line  66)

								* magit-display-buffer-fullframe-status-v1: Switching Buffers.

								                                                              (line  60)

								* magit-display-buffer-same-window-except-diff-v1: Switching Buffers.

								                                                              (line  54)

								* magit-display-buffer-traditional:      Switching Buffers.   (line  46)

								* magit-file-checkout:                   Minor Mode for Buffers Visiting Files.

								                                                              (line 165)

								* magit-file-delete:                     Minor Mode for Buffers Visiting Files.

								                                                              (line 157)

								* magit-file-rename:                     Minor Mode for Buffers Visiting Files.

								                                                              (line 153)

								* magit-file-untrack:                    Minor Mode for Buffers Visiting Files.

								                                                              (line 161)

								* magit-find-file:                       General-Purpose Visit Commands.

								                                                              (line   9)

								* magit-find-file-other-frame:           General-Purpose Visit Commands.

								                                                              (line  21)

								* magit-find-file-other-window:          General-Purpose Visit Commands.

								                                                              (line  15)

								* magit-generate-buffer-name-default-function: Naming Buffers.

								                                                              (line  17)

								* magit-get-section:                     Matching Sections.   (line  16)

								* magit-git:                             Calling Git for Effect.

								                                                              (line  65)

								* magit-git-exit-code:                   Getting a Value from Git.

								                                                              (line  10)

								* magit-git-failure:                     Getting a Value from Git.

								                                                              (line  19)

								* magit-git-false:                       Getting a Value from Git.

								                                                              (line  29)

								* magit-git-insert:                      Getting a Value from Git.

								                                                              (line  34)

								* magit-git-items:                       Getting a Value from Git.

								                                                              (line  49)

								* magit-git-lines:                       Getting a Value from Git.

								                                                              (line  44)

								* magit-git-str:                         Getting a Value from Git.

								                                                              (line  72)

								* magit-git-string:                      Getting a Value from Git.

								                                                              (line  38)

								* magit-git-success:                     Getting a Value from Git.

								                                                              (line  14)

								* magit-git-true:                        Getting a Value from Git.

								                                                              (line  24)

								* magit-git-wash:                        Calling Git for Effect.

								                                                              (line  70)

								* magit-hunk-set-window-start:           Section Movement.    (line  43)

								* magit-ido-completing-read:             Support for Completion Frameworks.

								                                                              (line  48)

								* magit-insert-am-sequence:              Status Sections.     (line  28)

								* magit-insert-assumed-unchanged-files:  Status Sections.     (line 117)

								* magit-insert-bisect-log:               Status Sections.     (line  46)

								* magit-insert-bisect-output:            Status Sections.     (line  38)

								* magit-insert-bisect-rest:              Status Sections.     (line  42)

								* magit-insert-diff-filter-header:       Status Header Sections.

								                                                              (line  38)

								* magit-insert-error-header:             Status Header Sections.

								                                                              (line  28)

								* magit-insert-head-branch-header:       Status Header Sections.

								                                                              (line  42)

								* magit-insert-heading:                  Creating Sections.   (line  42)

								* magit-insert-ignored-files:            Status Sections.     (line 100)

								* magit-insert-local-branches:           References Sections. (line  17)

								* magit-insert-merge-log:                Status Sections.     (line  18)

								* magit-insert-modules:                  Status Module Sections.

								                                                              (line  12)

								* magit-insert-modules-overview:         Status Module Sections.

								                                                              (line  33)

								* magit-insert-modules-unpulled-from-pushremote: Status Module Sections.

								                                                              (line  50)

								* magit-insert-modules-unpulled-from-upstream: Status Module Sections.

								                                                              (line  44)

								* magit-insert-modules-unpushed-to-pushremote: Status Module Sections.

								                                                              (line  62)

								* magit-insert-modules-unpushed-to-upstream: Status Module Sections.

								                                                              (line  56)

								* magit-insert-push-branch-header:       Status Header Sections.

								                                                              (line  51)

								* magit-insert-rebase-sequence:          Status Sections.     (line  23)

								* magit-insert-recent-commits:           Status Sections.     (line 131)

								* magit-insert-remote-branches:          References Sections. (line  21)

								* magit-insert-remote-header:            Status Header Sections.

								                                                              (line  67)

								* magit-insert-repo-header:              Status Header Sections.

								                                                              (line  63)

								* magit-insert-section:                  Creating Sections.   (line   6)

								* magit-insert-sequencer-sequence:       Status Sections.     (line  33)

								* magit-insert-skip-worktree-files:      Status Sections.     (line 110)

								* magit-insert-staged-changes:           Status Sections.     (line  63)

								* magit-insert-stashes:                  Status Sections.     (line  67)

								* magit-insert-status-headers:           Status Header Sections.

								                                                              (line  12)

								* magit-insert-submodules:               Listing Submodules.  (line  35)

								* magit-insert-tags:                     References Sections. (line  25)

								* magit-insert-tags-header:              Status Header Sections.

								                                                              (line  56)

								* magit-insert-tracked-files:            Status Sections.     (line  96)

								* magit-insert-unpulled-cherries:        Status Sections.     (line 142)

								* magit-insert-unpulled-from-pushremote: Status Sections.     (line  79)

								* magit-insert-unpulled-from-upstream:   Status Sections.     (line  74)

								* magit-insert-unpulled-or-recent-commits: Status Sections.   (line 124)

								* magit-insert-unpushed-cherries:        Status Sections.     (line 149)

								* magit-insert-unpushed-to-pushremote:   Status Sections.     (line  89)

								* magit-insert-unpushed-to-upstream:     Status Sections.     (line  84)

								* magit-insert-unstaged-changes:         Status Sections.     (line  59)

								* magit-insert-untracked-files:          Status Sections.     (line  50)

								* magit-insert-upstream-branch-header:   Status Header Sections.

								                                                              (line  46)

								* magit-insert-user-header:              Status Header Sections.

								                                                              (line  75)

								* magit-list-repositories:               Repository List.     (line   6)

								* magit-list-submodules:                 Listing Submodules.  (line  13)

								* magit-log-maybe-show-more-commits:     Section Movement.    (line  57)

								* magit-log-maybe-update-blob-buffer:    Section Movement.    (line  71)

								* magit-log-maybe-update-revision-buffer: Section Movement.   (line  64)

								* magit-maybe-set-dedicated:             Switching Buffers.   (line 101)

								* magit-mode-display-buffer:             Refreshing Buffers.  (line  33)

								* magit-mode-quit-window:                Quitting Windows.    (line  34)

								* magit-mode-setup:                      Refreshing Buffers.  (line  17)

								* magit-push-implicitly:                 Pushing.             (line  74)

								* magit-push-to-remote:                  Pushing.             (line  85)

								* magit-region-sections:                 Section Selection.   (line  10)

								* magit-region-values:                   Section Selection.   (line  37)

								* magit-repolist-column-ident:           Repository List.     (line  30)

								* magit-repolist-column-path:            Repository List.     (line  35)

								* magit-repolist-column-unpulled-from-pushremote: Repository List.

								                                                              (line  49)

								* magit-repolist-column-unpulled-from-upstream: Repository List.

								                                                              (line  44)

								* magit-repolist-column-unpushed-to-pushremote: Repository List.

								                                                              (line  59)

								* magit-repolist-column-unpushed-to-upstream: Repository List.

								                                                              (line  54)

								* magit-repolist-column-version:         Repository List.     (line  39)

								* magit-restore-window-configuration:    Quitting Windows.    (line  23)

								* magit-revert-buffers:                  Editing Commit Messages.

								                                                              (line 178)

								* magit-run-git:                         Calling Git for Effect.

								                                                              (line  36)

								* magit-run-git-async:                   Calling Git for Effect.

								                                                              (line  80)

								* magit-run-git-with-editor:             Calling Git for Effect.

								                                                              (line  93)

								* magit-run-git-with-input:              Calling Git for Effect.

								                                                              (line  40)

								* magit-run-git-with-logfile:            Calling Git for Effect.

								                                                              (line  56)

								* magit-save-window-configuration:       Switching Buffers.   (line  90)

								* magit-section-case:                    Matching Sections.   (line  71)

								* magit-section-hide:                    Section Visibility.  (line  49)

								* magit-section-hide-children:           Section Visibility.  (line  64)

								* magit-section-ident:                   Matching Sections.   (line  11)

								* magit-section-match:                   Matching Sections.   (line  21)

								* magit-section-set-window-start:        Section Movement.    (line  50)

								* magit-section-show:                    Section Visibility.  (line  45)

								* magit-section-show-children:           Section Visibility.  (line  58)

								* magit-section-show-headings:           Section Visibility.  (line  53)

								* magit-section-toggle-children:         Section Visibility.  (line  68)

								* magit-section-value-if:                Matching Sections.   (line  61)

								* magit-start-git:                       Calling Git for Effect.

								                                                              (line 105)

								* magit-start-process:                   Calling Git for Effect.

								                                                              (line 124)

								* magit-status-maybe-update-blob-buffer: Section Movement.    (line  83)

								* magit-status-maybe-update-revision-buffer: Section Movement.

								                                                              (line  77)

								* magit-wip-log:                         Wip Modes.           (line  48)

								* magit-wip-log-current:                 Wip Modes.           (line  57)

								* with-editor-usage-message:             Editing Commit Messages.

								                                                              (line 215)


								File: magit.info,  Node: Variable Index,  Prev: Function Index,  Up: Top


								Appendix F Variable Index

								*************************


								[index]

								* Menu:


								* auto-revert-buffer-list-filter:        Automatic Reverting of File-Visiting Buffers.

								                                                              (line  81)

								* auto-revert-interval:                  Automatic Reverting of File-Visiting Buffers.

								                                                              (line  76)

								* auto-revert-mode:                      Automatic Reverting of File-Visiting Buffers.

								                                                              (line  62)

								* auto-revert-stop-on-user-input:        Automatic Reverting of File-Visiting Buffers.

								                                                              (line  71)

								* auto-revert-use-notify:                Automatic Reverting of File-Visiting Buffers.

								                                                              (line  49)

								* auto-revert-verbose:                   Automatic Reverting of File-Visiting Buffers.

								                                                              (line 103)

								* branch.autoSetupMerge:                 Branch Git Variables.

								                                                              (line  81)

								* branch.autoSetupRebase:                Branch Git Variables.

								                                                              (line  98)

								* branch.NAME.description:               Branch Git Variables.

								                                                              (line  48)

								* branch.NAME.merge:                     Branch Git Variables.

								                                                              (line  10)

								* branch.NAME.pushRemote:                Branch Git Variables.

								                                                              (line  34)

								* branch.NAME.rebase:                    Branch Git Variables.

								                                                              (line  22)

								* branch.NAME.remote:                    Branch Git Variables.

								                                                              (line  16)

								* core.notesRef:                         Notes.               (line  60)

								* git-commit-fill-column:                Editing Commit Messages.

								                                                              (line 228)

								* git-commit-finish-query-functions:     Editing Commit Messages.

								                                                              (line 233)

								* git-commit-known-pseudo-headers:       Editing Commit Messages.

								                                                              (line 124)

								* git-commit-major-mode:                 Editing Commit Messages.

								                                                              (line 163)

								* git-commit-setup-hook:                 Editing Commit Messages.

								                                                              (line 174)

								* git-commit-summary-max-length:         Editing Commit Messages.

								                                                              (line 222)

								* git-rebase-auto-advance:               Editing Rebase Sequences.

								                                                              (line  99)

								* git-rebase-confirm-cancel:             Editing Rebase Sequences.

								                                                              (line 107)

								* git-rebase-show-instructions:          Editing Rebase Sequences.

								                                                              (line 103)

								* global-auto-revert-mode:               Automatic Reverting of File-Visiting Buffers.

								                                                              (line  22)

								* global-magit-file-mode:                Minor Mode for Buffers Visiting Files.

								                                                              (line  13)

								* magit-auto-revert-immediately:         Automatic Reverting of File-Visiting Buffers.

								                                                              (line  32)

								* magit-auto-revert-mode:                Automatic Reverting of File-Visiting Buffers.

								                                                              (line  17)

								* magit-auto-revert-tracked-only:        Automatic Reverting of File-Visiting Buffers.

								                                                              (line  55)

								* magit-bisect-show-graph:               Bisecting.           (line  55)

								* magit-blame-disable-modes:             Blaming.             (line 168)

								* magit-blame-echo-style:                Blaming.             (line 151)

								* magit-blame-goto-chunk-hook:           Blaming.             (line 174)

								* magit-blame-read-only:                 Blaming.             (line 163)

								* magit-blame-styles:                    Blaming.             (line 146)

								* magit-blame-time-format:               Blaming.             (line 158)

								* magit-branch-adjust-remote-upstream-alist: Branch Commands. (line 210)

								* magit-branch-direct-configure:         Branch Commands.     (line  20)

								* magit-branch-prefer-remote-upstream:   Branch Commands.     (line 165)

								* magit-branch-read-upstream-first:      Branch Commands.     (line 159)

								* magit-buffer-name-format:              Naming Buffers.      (line  27)

								* magit-bury-buffer-function:            Quitting Windows.    (line  14)

								* magit-cherry-margin:                   Cherries.            (line  22)

								* magit-clone-always-transient:          Cloning Repository.  (line  12)

								* magit-clone-default-directory:         Cloning Repository.  (line  90)

								* magit-clone-name-alist:                Cloning Repository.  (line 103)

								* magit-clone-set-remote-head:           Cloning Repository.  (line  68)

								* magit-clone-set-remote.pushDefault:    Cloning Repository.  (line  78)

								* magit-clone-url-format:                Cloning Repository.  (line 124)

								* magit-commit-ask-to-stage:             Initiating a Commit. (line  75)

								* magit-commit-extend-override-date:     Initiating a Commit. (line  80)

								* magit-commit-reword-override-date:     Initiating a Commit. (line  84)

								* magit-commit-squash-confirm:           Initiating a Commit. (line  88)

								* magit-completing-read-function:        Support for Completion Frameworks.

								                                                              (line  27)

								* magit-diff-adjust-tab-width:           Diff Options.        (line  21)

								* magit-diff-buffer-file-locked:         Minor Mode for Buffers Visiting Files.

								                                                              (line  91)

								* magit-diff-hide-trailing-cr-characters: Diff Options.       (line  90)

								* magit-diff-highlight-hunk-region-functions: Diff Options.   (line  94)

								* magit-diff-highlight-indentation:      Diff Options.        (line  75)

								* magit-diff-highlight-trailing:         Diff Options.        (line  70)

								* magit-diff-paint-whitespace:           Diff Options.        (line  43)

								* magit-diff-paint-whitespace-lines:     Diff Options.        (line  60)

								* magit-diff-refine-hunk:                Diff Options.        (line   6)

								* magit-diff-refine-ignore-whitespace:   Diff Options.        (line  16)

								* magit-diff-unmarked-lines-keep-foreground: Diff Options.    (line 120)

								* magit-diff-visit-previous-blob:        Visiting Files and Blobs from a Diff.

								                                                              (line  39)

								* magit-direct-use-buffer-arguments:     Transient Arguments and Buffer Variables.

								                                                              (line  73)

								* magit-display-buffer-function:         Switching Buffers.   (line  27)

								* magit-display-buffer-noselect:         Switching Buffers.   (line  18)

								* magit-dwim-selection:                  Completion and Confirmation.

								                                                              (line  42)

								* magit-ediff-dwim-show-on-hunks:        Ediffing.            (line  73)

								* magit-ediff-quit-hook:                 Ediffing.            (line  88)

								* magit-ediff-show-stash-with-index:     Ediffing.            (line  81)

								* magit-file-mode-map:                   Minor Mode for Buffers Visiting Files.

								                                                              (line  20)

								* magit-generate-buffer-name-function:   Naming Buffers.      (line   6)

								* magit-git-debug:                       Viewing Git Output.  (line  28)

								* magit-git-debug <1>:                   Getting a Value from Git.

								                                                              (line  64)

								* magit-git-executable:                  Git Executable.      (line  39)

								* magit-git-global-arguments:            Global Git Arguments.

								                                                              (line   6)

								* magit-keep-region-overlay:             The Selection.       (line  52)

								* magit-list-refs-sortby:                Additional Completion Options.

								                                                              (line   6)

								* magit-log-auto-more:                   Log Buffer.          (line  69)

								* magit-log-buffer-file-locked:          Minor Mode for Buffers Visiting Files.

								                                                              (line 118)

								* magit-log-margin:                      Log Margin.          (line  12)

								* magit-log-section-args:                Status Options.      (line  36)

								* magit-log-section-commit-count:        Status Sections.     (line 136)

								* magit-log-select-margin:               Select from Log.     (line  30)

								* magit-log-show-refname-after-summary:  Log Buffer.          (line  75)

								* magit-log-trace-definition-function:   Commands Available in Diffs.

								                                                              (line  18)

								* magit-module-sections-hook:            Status Module Sections.

								                                                              (line  20)

								* magit-module-sections-nested:          Status Module Sections.

								                                                              (line  24)

								* magit-no-confirm:                      Action Confirmation. (line  18)

								* magit-pop-revision-stack-format:       Editing Commit Messages.

								                                                              (line  92)

								* magit-post-display-buffer-hook:        Switching Buffers.   (line  96)

								* magit-pre-display-buffer-hook:         Switching Buffers.   (line  85)

								* magit-prefer-remote-upstream:          Branch Git Variables.

								                                                              (line 126)

								* magit-prefix-use-buffer-arguments:     Transient Arguments and Buffer Variables.

								                                                              (line  64)

								* magit-process-raise-error:             Calling Git for Effect.

								                                                              (line 151)

								* magit-pull-or-fetch:                   Fetching.            (line  55)

								* magit-reflog-margin:                   Reflog.              (line  23)

								* magit-refresh-args:                    Refreshing Buffers.  (line  55)

								* magit-refresh-buffer-hook:             Automatic Refreshing of Magit Buffers.

								                                                              (line  42)

								* magit-refresh-function:                Refreshing Buffers.  (line  49)

								* magit-refresh-status-buffer:           Automatic Refreshing of Magit Buffers.

								                                                              (line  48)

								* magit-refs-filter-alist:               References Buffer.   (line 157)

								* magit-refs-focus-column-width:         References Buffer.   (line  82)

								* magit-refs-margin:                     References Buffer.   (line  97)

								* magit-refs-margin-for-tags:            References Buffer.   (line 123)

								* magit-refs-pad-commit-counts:          References Buffer.   (line  49)

								* magit-refs-primary-column-width:       References Buffer.   (line  69)

								* magit-refs-sections-hook:              References Sections. (line  13)

								* magit-refs-show-commit-count:          References Buffer.   (line  37)

								* magit-refs-show-remote-prefix:         References Buffer.   (line  62)

								* magit-remote-add-set-remote.pushDefault: Remote Commands.   (line  92)

								* magit-remote-direct-configure:         Remote Commands.     (line  21)

								* magit-remote-set-if-missing:           Remote Git Variables.

								                                                              (line  39)

								* magit-repolist-columns:                Repository List.     (line  14)

								* magit-repository-directories:          Status Buffer.       (line  58)

								* magit-revision-filter-files-on-follow: Revision Buffer.     (line  64)

								* magit-revision-insert-related-refs:    Revision Buffer.     (line   6)

								* magit-revision-show-gravatars:         Revision Buffer.     (line  19)

								* magit-revision-use-hash-sections:      Revision Buffer.     (line  36)

								* magit-root-section:                    Matching Sections.   (line  87)

								* magit-save-repository-buffers:         Automatic Saving of File-Visiting Buffers.

								                                                              (line  13)

								* magit-section-cache-visibility:        Section Visibility.  (line  95)

								* magit-section-initial-visibility-alist: Section Visibility. (line  78)

								* magit-section-movement-hook:           Section Movement.    (line  38)

								* magit-section-set-visibility-hook:     Section Visibility.  (line 106)

								* magit-section-show-child-count:        Section Options.     (line   9)

								* magit-section-visibility-indicator:    Section Visibility.  (line 124)

								* magit-shell-command-verbose-prompt:    Running Git Manually.

								                                                              (line  47)

								* magit-stashes-margin:                  Stashing.            (line 104)

								* magit-status-headers-hook:             Status Header Sections.

								                                                              (line  18)

								* magit-status-margin:                   Status Options.      (line  10)

								* magit-status-refresh-hook:             Status Options.      (line   6)

								* magit-status-sections-hook:            Status Sections.     (line  10)

								* magit-submodule-list-columns:          Listing Submodules.  (line  21)

								* magit-this-process:                    Calling Git for Effect.

								                                                              (line 146)

								* magit-uniquify-buffer-names:           Naming Buffers.      (line  74)

								* magit-unstage-committed:               Staging and Unstaging.

								                                                              (line  56)

								* magit-update-other-window-delay:       Section Movement.    (line  89)

								* magit-visit-ref-behavior:              References Buffer.   (line 190)

								* magit-wip-after-apply-mode:            Legacy Wip Modes.    (line  19)

								* magit-wip-after-apply-mode-lighter:    Legacy Wip Modes.    (line  59)

								* magit-wip-after-save-local-mode-lighter: Legacy Wip Modes.  (line  55)

								* magit-wip-after-save-mode:             Legacy Wip Modes.    (line  13)

								* magit-wip-before-change-mode:          Legacy Wip Modes.    (line  33)

								* magit-wip-before-change-mode-lighter:  Legacy Wip Modes.    (line  63)

								* magit-wip-initial-backup-mode:         Legacy Wip Modes.    (line  38)

								* magit-wip-initial-backup-mode-lighter: Legacy Wip Modes.    (line  67)

								* magit-wip-merge-branch:                Wip Graph.           (line   6)

								* magit-wip-mode:                        Wip Modes.           (line  30)

								* magit-wip-mode-lighter:                Wip Modes.           (line 104)

								* magit-wip-namespace:                   Wip Modes.           (line  96)

								* notes.displayRef:                      Notes.               (line  65)

								* pull.rebase:                           Branch Git Variables.

								                                                              (line  57)

								* remote.NAME.fetch:                     Remote Git Variables.

								                                                              (line  15)

								* remote.NAME.push:                      Remote Git Variables.

								                                                              (line  26)

								* remote.NAME.pushurl:                   Remote Git Variables.

								                                                              (line  20)

								* remote.NAME.tagOpts:                   Remote Git Variables.

								                                                              (line  31)

								* remote.NAME.url:                       Remote Git Variables.

								                                                              (line  10)

								* remote.pushDefault:                    Branch Git Variables.

								                                                              (line  71)