Klimi's new dotfiles with stow.
Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.
 
 
 
 
 
 

3387 linhas
182 KiB

This is magit.info, produced by makeinfo version 6.5 from magit.texi.
Copyright (C) 2015-2019 Jonas Bernoulli <jonas@bernoul.li>
You can redistribute this document and/or modify it under the terms
of the GNU General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option)
any later version.
This document is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
INFO-DIR-SECTION Emacs
START-INFO-DIR-ENTRY
* Magit: (magit). Using Git from Emacs with Magit.
END-INFO-DIR-ENTRY

File: magit.info, Node: Wip Graph, Next: Legacy Wip Modes, Up: Wip Modes
8.7.1 Wip Graph
---------------
-- User Option: magit-wip-merge-branch
This option controls whether the current branch is merged into the
wip refs after a new commit was created on the branch.
If non-nil and the current branch has new commits, then it is
merged into the wip ref before creating a new wip commit. This
makes it easier to inspect wip history and the wip commits are
never garbage collected.
If nil and the current branch has new commits, then the wip ref is
reset to the tip of the branch before creating a new wip commit.
With this setting wip commits are eventually garbage collected.
When magit-wip-merge-branch is t, then the history looks like
this:
*--*--*--*--*--* refs/wip/index/refs/heads/master
/ / /
A-----B-----C refs/heads/master
When magit-wip-merge-branch is nil, then creating a commit on the
real branch and then making a change causes the wip refs to be recreated
to fork from the new commit. But the old commits on the wip refs are
not lost. They are still available from the reflog. To make it easier
to see when the fork point of a wip ref was changed, an additional
commit with the message "restart autosaving" is created on it (xxO
commits below are such boundary commits).
Starting with
BI0---BI1 refs/wip/index/refs/heads/master
/
A---B refs/heads/master
\
BW0---BW1 refs/wip/wtree/refs/heads/master
and committing the staged changes and editing and saving a file would
result in
BI0---BI1 refs/wip/index/refs/heads/master
/
A---B---C refs/heads/master
\ \
\ CW0---CW1 refs/wip/wtree/refs/heads/master
\
BW0---BW1 refs/wip/wtree/refs/heads/master@{2}
The fork-point of the index wip ref is not changed until some change
is being staged. Likewise just checking out a branch or creating a
commit does not change the fork-point of the working tree wip ref. The
fork-points are not adjusted until there actually is a change that
should be committed to the respective wip ref.

File: magit.info, Node: Legacy Wip Modes, Prev: Wip Graph, Up: Wip Modes
8.7.2 Legacy Wip Modes
----------------------
It is recommended that you use the mode magit-wip-mode (which see) and
ignore the existence of the following modes, which are preserved for
historic reasons.
Setting the following variables directly does not take effect; either
use the Custom interface to do so or call the respective mode functions.
-- User Option: magit-wip-after-save-mode
When this mode is enabled, then saving a buffer that visits a file
tracked in a Git repository causes its current state to be
committed to the working tree wip ref for the current branch.
-- User Option: magit-wip-after-apply-mode
When this mode is enabled, then applying (i.e. staging, unstaging,
discarding, reversing, and regularly applying) a change to a file
tracked in a Git repository causes its current state to be
committed to the index and/or working tree wip refs for the current
branch.
If you only ever edit files using Emacs and only ever interact with
Git using Magit, then the above two modes should be enough to protect
each and every change from accidental loss. In practice nobody does
that. Two additional modes exists that do commit to the wip refs before
making changes that could cause the loss of earlier changes.
-- User Option: magit-wip-before-change-mode
When this mode is enabled, then certain commands commit the
existing changes to the files they are about to make changes to.
-- User Option: magit-wip-initial-backup-mode
When this mode is enabled, then the current version of a file is
committed to the worktree wip ref before the buffer visiting that
file is saved for the first time since the buffer was created.
This backs up the same version of the file that backup-buffer
would save. While backup-buffer uses a backup file, this mode
uses the same worktree wip ref as used by the other Magit Wip
modes. Like backup-buffer, it only does this once; unless you
kill the buffer and visit the file again only one backup will be
created per Emacs session.
This mode ignores the variables that affect backup-buffer and can
be used along-side that function, which is recommended because it
only backs up files that are tracked in a Git repository.
-- User Option: magit-wip-after-save-local-mode-lighter
Mode-line lighter for magit-wip-after-save-local-mode.
-- User Option: magit-wip-after-apply-mode-lighter
Mode-line lighter for magit-wip-after-apply-mode.
-- User Option: magit-wip-before-change-mode-lighter
Mode-line lighter for magit-wip-before-change-mode.
-- User Option: magit-wip-initial-backup-mode-lighter
Mode-line lighter for magit-wip-initial-backup-mode.

File: magit.info, Node: Minor Mode for Buffers Visiting Files, Next: Minor Mode for Buffers Visiting Blobs, Prev: Wip Modes, Up: Miscellaneous
8.8 Minor Mode for Buffers Visiting Files
=========================================
The minor-mode magit-file-mode enables certain Magit features in
file-visiting buffers belonging to a Git repository. The globalized
variant global-magit-file-mode enables the local mode in all such
buffers. It is enabled by default. Currently the local mode only
establishes a few key bindings, but this might be extended in the
future.
-- User Option: global-magit-file-mode
Whether to establish certain Magit key bindings in all
file-visiting buffers belonging to any Git repository. This is
enabled by default. This globalized mode turns on the local
minor-mode magit-file-mode in all suitable buffers.
-- Variable: magit-file-mode-map
This keymap is used by the local minor-mode magit-file-mode and
establishes the key bindings described below.
Note that the default binding for magit-file-dispatch is very
cumbersome to use and that we recommend that you add a better
binding.
Instead of C-c M-g I would have preferred to use C-c g because
(1) it is similar to C-x g (the recommended global binding for
~magit-status), (2) we cannot use C-c C-g because we have been
recommending that that be bound to magit-dispatch for a long
time, (3) we cannot use C-x C-g because that is a convenient way
of aborting the incomplete key sequence C-x, and most importantly
(4) it would make it much easier to type the next key (a suffix
binding) because most of those are letters.
For example C-c g b is much easier to type than C-c M-g b. For
suffix bindings that use uppercase letters, the default is just
horriblehaving to use e.g. C-c M-g B (Control+c Meta+g
Shift+b) would drive anyone up the walls (or to Vim).
However C-c LETTER bindings are reserved for users (see *note
(elisp)Key Binding Conventions::). Packages are forbidden from
using those. Doing so anyway is considered heresy. Therefore if
you want a better binding, you have to add it yourself:
(define-key magit-file-mode-map
(kbd "C-c g") 'magit-file-dispatch)
The key bindings shown below assume that you have not improved the
binding for magit-file-dispatch.
C-c M-g (magit-file-dispatch)
This transient prefix command binds the following suffix commands
and displays them in a temporary buffer until a suffix is invoked.
C-c M-g s (magit-stage-file)
Stage all changes to the file being visited in the current buffer.
C-c M-g u (magit-unstage-file)
Unstage all changes to the file being visited in the current
buffer.
C-c M-g c (magit-commit)
This transient prefix command binds the following suffix commands
along with the appropriate infix arguments and displays them in a
temporary buffer until a suffix is invoked. See *note Initiating a
Commit::.
C-c M-g D (magit-diff)
This transient prefix command binds several diff suffix commands
and infix arguments and displays them in a temporary buffer until a
suffix is invoked. See *note Diffing::.
This is the same command that d is bound to in Magit buffers. If
this command is invoked from a file-visiting buffer, then the
initial value of the option (--) that limits the diff to certain
file(s) is set to the visited file.
C-c M-g d (magit-diff-buffer-file)
This command shows the diff for the file of blob that the current
buffer visits.
-- User Option: magit-diff-buffer-file-locked
This option controls whether magit-diff-buffer-file uses a
dedicated buffer. See *note Modes and Buffers::.
C-c M-g L (magit-log)
This transient prefix command binds several log suffix commands and
infix arguments and displays them in a temporary buffer until a
suffix is invoked. See *note Logging::.
This is the same command that l is bound to in Magit buffers. If
this command is invoked from a file-visiting buffer, then the
initial value of the option (--) that limits the log to certain
file(s) is set to the visited file.
C-c M-g l (magit-log-buffer-file)
This command shows the log for the file of blob that the current
buffer visits. Renames are followed when a prefix argument is used
or when --follow is an active log argument. When the region is
active, the log is restricted to the selected line range.
C-c M-g t (magit-log-trace-definition)
This command shows the log for the definition at point.
-- User Option: magit-log-buffer-file-locked
This option controls whether magit-log-buffer-file uses a
dedicated buffer. See *note Modes and Buffers::.
C-c M-g B (magit-blame)
This transient prefix command binds all blaming suffix commands
along with the appropriate infix arguments and displays them in a
temporary buffer until a suffix is invoked.
For more information about this and the following commands also see
*note Blaming::.
In addition to the magit-blame sub-transient, the dispatch
transient also binds several blaming suffix commands directly. See
*note Blaming:: for information about those commands and bindings.
C-c M-g e (magit-edit-line-commit)
This command makes the commit editable that added the current line.
With a prefix argument it makes the commit editable that removes
the line, if any. The commit is determined using git blame and
made editable using git rebase --interactive if it is reachable
from HEAD, or by checking out the commit (or a branch that points
at it) otherwise.
C-c M-g p (magit-blob-previous)
Visit the previous blob which modified the current file.
There are a few additional commands that operate on a single file but
are not enabled in the file transient command by default:
-- Command: magit-file-rename
This command renames a file read from the user.
-- Command: magit-file-delete
This command deletes a file read from the user.
-- Command: magit-file-untrack
This command untracks a file read from the user.
-- Command: magit-file-checkout
This command updates a file in the working tree and index to the
contents from a revision. Both the revision and file are read from
the user.
To enable them invoke the transient (C-c M-g), enter "edit mode"
(C-x l), set the "transient level" (C-x l again), enter 5, and
leave edit mode (C-g). Also see *note (transient)Enabling and
Disabling Suffixes::.

File: magit.info, Node: Minor Mode for Buffers Visiting Blobs, Prev: Minor Mode for Buffers Visiting Files, Up: Miscellaneous
8.9 Minor Mode for Buffers Visiting Blobs
=========================================
The magit-blob-mode enables certain Magit features in blob-visiting
buffers. Such buffers can be created using magit-find-file and some
of the commands mentioned below, which also take care of turning on this
minor mode. Currently this mode only establishes a few key bindings,
but this might be extended.
p (magit-blob-previous)
Visit the previous blob which modified the current file.
n (magit-blob-next)
Visit the next blob which modified the current file.
q (magit-kill-this-buffer)
Kill the current buffer.

File: magit.info, Node: Customizing, Next: Plumbing, Prev: Miscellaneous, Up: Top
9 Customizing
*************
Both Git and Emacs are highly customizable. Magit is both a Git
porcelain as well as an Emacs package, so it makes sense to customize it
using both Git variables as well as Emacs options. However this
flexibility doesnt come without problems, including but not limited to
the following.
Some Git variables automatically have an effect in Magit without
requiring any explicit support. Sometimes that is desirable - in
other cases, it breaks Magit.
When a certain Git setting breaks Magit but you want to keep using
that setting on the command line, then that can be accomplished by
overriding the value for Magit only by appending something like
("-c" "some.variable=compatible-value") to
magit-git-global-arguments.
Certain settings like fetch.prune=true are respected by Magit
commands (because they simply call the respective Git command) but
their value is not reflected in the respective transient buffers.
In this case the --prune argument in magit-fetch might be
active or inactive, but that doesnt keep the Git variable from
being honored by the suffix commands anyway. So pruning might
happen despite the --prune arguments being displayed in a way
that seems to indicate that no pruning will happen.
I intend to address these and similar issues in a future release.
* Menu:
* Per-Repository Configuration::
* Essential Settings::

File: magit.info, Node: Per-Repository Configuration, Next: Essential Settings, Up: Customizing
9.1 Per-Repository Configuration
================================
Magit can be configured on a per-repository level using both Git
variables as well as Emacs options.
To set a Git variable for one repository only, simply set it in
/path/to/repo/.git/config instead of $HOME/.gitconfig or
/etc/gitconfig. See *note (gitman)git-config::.
Similarly, Emacs options can be set for one repository only by
editing /path/to/repo/.dir-locals.el. See *note (emacs)Directory
Variables::. For example to disable automatic refreshes of
file-visiting buffers in just one huge repository use this:
/path/to/huge/repo/.dir-locals.el
((nil . ((magit-refresh-buffers . nil))))
If you want to apply the same settings to several, but not all,
repositories then keeping the repository-local config files in sync
would quickly become annoying. To avoid that you can create config
files for certain classes of repositories (e.g. "huge repositories")
and then include those files in the per-repository config files. For
example:
/path/to/huge/repo/.git/config
[include]
path = /path/to/huge-gitconfig
/path/to/huge-gitconfig
[status]
showUntrackedFiles = no
$HOME/.emacs.d/init.el
(dir-locals-set-class-variables 'huge-git-repository
'((nil . ((magit-refresh-buffers . nil)))))
(dir-locals-set-directory-class
"/path/to/huge/repo/" 'huge-git-repository)

File: magit.info, Node: Essential Settings, Prev: Per-Repository Configuration, Up: Customizing
9.2 Essential Settings
======================
The next two sections list and discuss several variables that many users
might want to customize, for safety and/or performance reasons.
* Menu:
* Safety::
* Performance::

File: magit.info, Node: Safety, Next: Performance, Up: Essential Settings
9.2.1 Safety
------------
This section discusses various variables that you might want to change
(or *not* change) for safety reasons.
Git keeps *committed* changes around long enough for users to recover
changes they have accidentally been deleted. It does not do the same
for *uncommitted* changes in the working tree and not even the index
(the staging area). Because Magit makes it so easy to modify
uncommitted changes, it also makes it easy to shoot yourself in the foot
in the process. For that reason Magit provides three global modes that
save *tracked* files to work-in-progress references after or before
certain actions. See *note Wip Modes::.
These modes are not enabled by default because of performance
concerns. Instead a lot of potentially destructive commands require
confirmation every time they are used. In many cases this can be
disabled by adding a symbol to magit-no-confirm (see *note Completion
and Confirmation::). If you enable the various wip modes then you
should add safe-with-wip to this list.
Similarly it isnt necessary to require confirmation before moving a
file to the system trash - if you trashed a file by mistake then you can
recover it from the there. Option magit-delete-by-moving-to-trash
controls whether the system trash is used, which is the case by default.
Nevertheless, trash isnt a member of magit-no-confirm - you might
want to change that.
By default buffers visiting files are automatically reverted when the
visited file changes on disk. This isnt as risky as it might seem, but
to make an informed decision you should see *note Risk of Reverting
Automatically::.

File: magit.info, Node: Performance, Prev: Safety, Up: Essential Settings
9.2.2 Performance
-----------------
After Magit has run git for side-effects, it also refreshes the
current Magit buffer and the respective status buffer. This is
necessary because otherwise outdated information might be displayed
without the user noticing. Magit buffers are updated by recreating
their content from scratch, which makes updating simpler and less
error-prone, but also more costly. Keeping it simple and just
re-creating everything from scratch is an old design decision and
departing from that will require major refactoring.
I plan to do that in time for the next major release. I also intend
to create logs and diffs asynchronously, which should also help a lot
but also requires major refactoring.
Meanwhile you can tell Magit to only automatically refresh the
current Magit buffer, but not the status buffer. If you do that, then
the status buffer is only refreshed automatically if it is the current
buffer.
(setq magit-refresh-status-buffer nil)
You should also check whether any third-party packages have added
anything to magit-refresh-buffer-hook, magit-status-refresh-hook,
magit-pre-refresh-hook, and magit-post-refresh-hook. If so, then
check whether those additions impact performance significantly. Setting
magit-refresh-verbose and then inspecting the output in the
*Messages* buffer, should help doing so.
Magit also reverts buffers for visited files located inside the
current repository when the visited file changes on disk. That is
implemented on top of auto-revert-mode from the built-in library
autorevert. To figure out whether that impacts performance, check
whether performance is significantly worse, when many buffers exist
and/or when some buffers visit files using TRAMP. If so, then this
should help.
(setq auto-revert-buffer-list-filter
'magit-auto-revert-repository-buffer-p)
For alternative approaches see *note Automatic Reverting of
File-Visiting Buffers::.
If you have enabled any features that are disabled by default, then
you should check whether they impact performance significantly. Its
likely that they were not enabled by default because it is known that
they reduce performance at least in large repositories.
If performance is only slow inside certain unusually large
repositories, then you might want to disable certain features on a
per-repository or per-repository-class basis only. See *note
Per-Repository Configuration::.
* Menu:
* Microsoft Windows Performance::
* MacOS Performance::
Log Performance
...............
When showing logs, Magit limits the number of commits initially shown in
the hope that this avoids unnecessary work. When using --graph is
used, then this unfortunately does not have the desired effect for large
histories. Junio, Gits maintainer, said on the git mailing list
(<http://www.spinics.net/lists/git/msg232230.html>): "‘--graph’ wants to
compute the whole history and the max-count only affects the output
phase after --graph does its computation".
In other words, it’s not that Git is slow at outputting the
differences, or that Magit is slow at parsing the output - the problem
is that Git first goes outside and has a smoke.
We actually work around this issue by limiting the number of commits
not only by using ‘-<N>’ but by also using a range. But unfortunately
that’s not always possible.
When more than a few thousand commits are shown, then the use of
‘--graph’ can slow things down.
Using ‘--color --graph’ is even slower. Magit uses code that is part
of Emacs to turn control characters into faces. That code is pretty
slow and this is quite noticeable when showing a log with many branches
and merges. For that reason ‘--color’ is not enabled by default
anymore. Consider leaving it at that.
Diff Performance
................
If diffs are slow, then consider turning off some optional diff features
by setting all or some of the following variables to ‘nil’:
‘magit-diff-highlight-indentation’, ‘magit-diff-highlight-trailing’,
‘magit-diff-paint-whitespace’, ‘magit-diff-highlight-hunk-body’, and
‘magit-diff-refine-hunk’.
When showing a commit instead of some arbitrary diff, then some
additional information is displayed. Calculating this information can
be quite expensive given certain circumstances. If looking at a commit
using ‘magit-revision-mode’ takes considerably more time than looking at
the same commit in ‘magit-diff-mode’, then consider setting
‘magit-revision-insert-related-refs’ to ‘nil’.
Refs Buffer Performance
.......................
When refreshing the "references buffer" is slow, then that’s usually
because several hundred refs are being displayed. The best way to
address that is to display fewer refs, obviously.
If you are not, or only mildly, interested in seeing the list of
tags, then start by not displaying them:
(remove-hook 'magit-refs-sections-hook 'magit-insert-tags)
Then you should also make sure that the listed remote branches
actually all exist. You can do so by pruning branches which no longer
exist using ‘f-pa’.
Committing Performance
......................
When you initiate a commit, then Magit by default automatically shows a
diff of the changes you are about to commit. For large commits this can
take a long time, which is especially distracting when you are
committing large amounts of generated data which you don’t actually
intend to inspect before committing. This behavior can be turned off
using:
(remove-hook 'server-switch-hook 'magit-commit-diff)
Then you can type ‘C-c C-d’ to show the diff when you actually want
to see it, but only then. Alternatively you can leave the hook alone
and just type ‘C-g’ in those cases when it takes too long to generate
the diff. If you do that, then you will end up with a broken diff
buffer, but doing it this way has the advantage that you usually get to
see the diff, which is useful because it increases the odds that you
spot potential issues.
The Built-In VC Package
.......................
Emacs comes with a version control interface called "VC", see *note
(emacs)Version Control::. It is enabled be default, and if you don’t
use it in addition to Magit, then you should disable it to keep it from
performing unnecessary work:
(setq vc-handled-backends nil)
You can also disable its use for Git but keep using it when using
another version control system:
(setq vc-handled-backends (delq 'Git vc-handled-backends))

File: magit.info, Node: Microsoft Windows Performance, Next: MacOS Performance, Up: Performance
Microsoft Windows Performance
.............................
In order to update the status buffer, ‘git’ has to be run a few dozen
times. That is problematic on Microsoft Windows, because that operating
system is exceptionally slow at starting processes. Sadly this is an
issue that can only be fixed by Microsoft itself, and they don’t appear
to be particularly interested in doing so.
Beside the subprocess issue, there are also other Windows-specific
performance issues. Some of these have workarounds. The maintainers of
"Git for Windows" try to improve performance on Windows. Always use the
latest release in order to benefit from the latest performance tweaks.
Magit too tries to work around some Windows-specific issues.
According to some sources, setting the following Git variables can
also help.
git config --global core.preloadindex true # default since v2.1
git config --global core.fscache true # default since v2.8
git config --global gc.auto 256
You should also check whether an anti-virus program is affecting
performance.

File: magit.info, Node: MacOS Performance, Prev: Microsoft Windows Performance, Up: Performance
MacOS Performance
.................
On macOS Emacs currently creates child processes using ‘fork’. It
appears that this also copies GUI resources. The result is that forking
takes about 30 times as long on Darwin than on Linux. And because Magit
starts many ‘git’ processes even when doing simple things, that makes
quite a difference.
On the ‘master’ branch Emacs now uses ‘vfork’ when possible, like
this was already done on Linux, and now child creation only takes about
twice as long on Darwin. See (1) for more information.
Nobody knows when the changes on the ‘master’ branch will be released
as ‘26.1’, but it is still a long way off. You might want to get your
hands on this change before then. The easiest way to get a patched
Emacs is to install the ‘emacs-plus’ formula (2) using ‘homebrew’. The
change has been backported, so you get it not only when using ‘--HEAD’,
but also when using ‘--devel’ or when installing the latest release (by
not using a version argument).
Alternatively you can apply the backport (3) manually.
---------- Footnotes ----------
(1)
<https://lists.gnu.org/archive/html/bug-gnu-emacs/2017-04/msg00201.html>
(2) <https://github.com/d12frosted/homebrew-emacs-plus>
(3)
<https://gist.githubusercontent.com/aaronjensen/f45894ddf431ecbff78b1bcf533d3e6b/raw/6a5cd7f57341aba673234348d8b0d2e776f86719/Emacs-25-OS-X-use-vfork.patch>

File: magit.info, Node: Plumbing, Next: FAQ, Prev: Customizing, Up: Top
10 Plumbing
***********
The following sections describe how to use several of Magit’s core
abstractions to extend Magit itself or implement a separate extension.
A few of the low-level features used by Magit have been factored out
into separate libraries/packages, so that they can be used by other
packages, without having to depend on Magit. See *note
(with-editor)Top:: for information about ‘with-editor’. ‘transient’
doesn’t have a manual yet.
If you are trying to find an unused key that you can bind to a
command provided by your own Magit extension, then checkout
<https://github.com/magit/magit/wiki/Plugin-Dispatch-Key-Registry>.
* Menu:
* Calling Git::
* Section Plumbing::
* Refreshing Buffers::
* Conventions::

File: magit.info, Node: Calling Git, Next: Section Plumbing, Up: Plumbing
10.1 Calling Git
================
Magit provides many specialized functions for calling Git. All of these
functions are defined in either ‘magit-git.el’ or ‘magit-process.el’ and
have one of the prefixes ‘magit-run-’, ‘magit-call-’, ‘magit-start-’, or
‘magit-git-’ (which is also used for other things).
All of these functions accept an indefinite number of arguments,
which are strings that specify command line arguments for Git (or in
some cases an arbitrary executable). These arguments are flattened
before being passed on to the executable; so instead of strings they can
also be lists of strings and arguments that are ‘nil’ are silently
dropped. Some of these functions also require a single mandatory
argument before these command line arguments.
Roughly speaking, these functions run Git either to get some value or
for side-effects. The functions that return a value are useful to
collect the information necessary to populate a Magit buffer, while the
others are used to implement Magit commands.
The functions in the value-only group always run synchronously, and
they never trigger a refresh. The function in the side-effect group can
be further divided into subgroups depending on whether they run Git
synchronously or asynchronously, and depending on whether they trigger a
refresh when the executable has finished.
* Menu:
* Getting a Value from Git::
* Calling Git for Effect::

File: magit.info, Node: Getting a Value from Git, Next: Calling Git for Effect, Up: Calling Git
10.1.1 Getting a Value from Git
-------------------------------
These functions run Git in order to get a value, an exit status, or
output. Of course you could also use them to run Git commands that have
side-effects, but that should be avoided.
-- Function: magit-git-exit-code &rest args
Executes git with ARGS and returns its exit code.
-- Function: magit-git-success &rest args
Executes git with ARGS and returns ‘t’ if the exit code is ‘0’,
‘nil’ otherwise.
-- Function: magit-git-failure &rest args
Executes git with ARGS and returns ‘t’ if the exit code is ‘1’,
‘nil’ otherwise.
-- Function: magit-git-true &rest args
Executes git with ARGS and returns ‘t’ if the first line printed by
git is the string "true", ‘nil’ otherwise.
-- Function: magit-git-false &rest args
Executes git with ARGS and returns ‘t’ if the first line printed by
git is the string "false", ‘nil’ otherwise.
-- Function: magit-git-insert &rest args
Executes git with ARGS and inserts its output at point.
-- Function: magit-git-string &rest args
Executes git with ARGS and returns the first line of its output.
If there is no output or if it begins with a newline character,
then this returns ‘nil’.
-- Function: magit-git-lines &rest args
Executes git with ARGS and returns its output as a list of lines.
Empty lines anywhere in the output are omitted.
-- Function: magit-git-items &rest args
Executes git with ARGS and returns its null-separated output as a
list. Empty items anywhere in the output are omitted.
If the value of option ‘magit-git-debug’ is non-nil and git exits
with a non-zero exit status, then warn about that in the echo area
and add a section containing git’s standard error in the current
repository’s process buffer.
If an error occurs when using one of the above functions, then that
is usually due to a bug, i.e. using an argument which is not actually
supported. Such errors are usually not reported, but when they occur we
need to be able to debug them.
-- User Option: magit-git-debug
Whether to report errors that occur when using ‘magit-git-insert’,
‘magit-git-string’, ‘magit-git-lines’, or ‘magit-git-items’. This
does not actually raise an error. Instead a message is shown in
the echo area, and git’s standard error is insert into a new
section in the current repository’s process buffer.
-- Function: magit-git-str &rest args
This is a variant of ‘magit-git-string’ that ignores the option
‘magit-git-debug’. It is mainly intended to be used while handling
errors in functions that do respect that option. Using such a
function while handing an error could cause yet another error and
therefore lead to an infinite recursion. You probably won’t ever
need to use this function.

File: magit.info, Node: Calling Git for Effect, Prev: Getting a Value from Git, Up: Calling Git
10.1.2 Calling Git for Effect
-----------------------------
These functions are used to run git to produce some effect. Most Magit
commands that actually run git do so by using such a function.
Because we do not need to consume git’s output when using these
functions, their output is instead logged into a per-repository buffer,
which can be shown using ‘$’ from a Magit buffer or ‘M-x magit-process’
elsewhere.
These functions can have an effect in two distinct ways. Firstly,
running git may change something, i.e. create or push a new commit.
Secondly, that change may require that Magit buffers are refreshed to
reflect the changed state of the repository. But refreshing isn’t
always desirable, so only some of these functions do perform such a
refresh after git has returned.
Sometimes it is useful to run git asynchronously. For example, when
the user has just initiated a push, then there is no reason to make her
wait until that has completed. In other cases it makes sense to wait
for git to complete before letting the user do something else. For
example after staging a change it is useful to wait until after the
refresh because that also automatically moves to the next change.
-- Function: magit-call-git &rest args
Calls git synchronously with ARGS.
-- Function: magit-call-process program &rest args
Calls PROGRAM synchronously with ARGS.
-- Function: magit-run-git &rest args
Calls git synchronously with ARGS and then refreshes.
-- Function: magit-run-git-with-input input &rest args
Calls git synchronously with ARGS and sends it INPUT on standard
input.
INPUT should be a buffer or the name of an existing buffer. The
content of that buffer is used as the process’ standard input.
After the process returns a refresh is performed.
As a special case, INPUT may also be nil. In that case the content
of the current buffer is used as standard input and *no* refresh is
performed.
This function actually runs git asynchronously. But then it waits
for the process to return, so the function itself is synchronous.
-- Function: magit-run-git-with-logfile file &rest args
Calls git synchronously with ARGS. The process’ output is saved in
FILE. This is rarely useful and so this function might be removed
in the future.
This function actually runs git asynchronously. But then it waits
for the process to return, so the function itself is synchronous.
-- Function: magit-git &rest args
Calls git synchronously with ARGS for side-effects only. This
function does not refresh the buffer.
-- Function: magit-git-wash washer &rest args
Execute Git with ARGS, inserting washed output at point. Actually
first insert the raw output at point. If there is no output call
‘magit-cancel-section’. Otherwise temporarily narrow the buffer to
the inserted text, move to its beginning, and then call function
WASHER with ARGS as its sole argument.
And now for the asynchronous variants.
-- Function: magit-run-git-async &rest args
Start Git, prepare for refresh, and return the process object.
ARGS is flattened and then used as arguments to Git.
Display the command line arguments in the echo area.
After Git returns some buffers are refreshed: the buffer that was
current when this function was called (if it is a Magit buffer and
still alive), as well as the respective Magit status buffer.
Unmodified buffers visiting files that are tracked in the current
repository are reverted if ‘magit-revert-buffers’ is non-nil.
-- Function: magit-run-git-with-editor &rest args
Export GIT_EDITOR and start Git. Also prepare for refresh and
return the process object. ARGS is flattened and then used as
arguments to Git.
Display the command line arguments in the echo area.
After Git returns some buffers are refreshed: the buffer that was
current when this function was called (if it is a Magit buffer and
still alive), as well as the respective Magit status buffer.
-- Function: magit-start-git &rest args
Start Git, prepare for refresh, and return the process object.
If INPUT is non-nil, it has to be a buffer or the name of an
existing buffer. The buffer content becomes the processes standard
input.
Option ‘magit-git-executable’ specifies the Git executable and
option ‘magit-git-global-arguments’ specifies constant arguments.
The remaining arguments ARGS specify arguments to Git. They are
flattened before use.
After Git returns, some buffers are refreshed: the buffer that was
current when this function was called (if it is a Magit buffer and
still alive), as well as the respective Magit status buffer.
Unmodified buffers visiting files that are tracked in the current
repository are reverted if ‘magit-revert-buffers’ is non-nil.
-- Function: magit-start-process &rest args
Start PROGRAM, prepare for refresh, and return the process object.
If optional argument INPUT is non-nil, it has to be a buffer or the
name of an existing buffer. The buffer content becomes the
processes standard input.
The process is started using ‘start-file-process’ and then setup to
use the sentinel ‘magit-process-sentinel’ and the filter
‘magit-process-filter’. Information required by these functions is
stored in the process object. When this function returns the
process has not started to run yet so it is possible to override
the sentinel and filter.
After the process returns, ‘magit-process-sentinel’ refreshes the
buffer that was current when ‘magit-start-process’ was called (if
it is a Magit buffer and still alive), as well as the respective
Magit status buffer. Unmodified buffers visiting files that are
tracked in the current repository are reverted if
‘magit-revert-buffers’ is non-nil.
-- Variable: magit-this-process
The child process which is about to start. This can be used to
change the filter and sentinel.
-- Variable: magit-process-raise-error
When this is non-nil, then ‘magit-process-sentinel’ raises an error
if git exits with a non-zero exit status. For debugging purposes.

File: magit.info, Node: Section Plumbing, Next: Refreshing Buffers, Prev: Calling Git, Up: Plumbing
10.2 Section Plumbing
=====================
* Menu:
* Creating Sections::
* Section Selection::
* Matching Sections::

File: magit.info, Node: Creating Sections, Next: Section Selection, Up: Section Plumbing
10.2.1 Creating Sections
------------------------
-- Macro: magit-insert-section &rest args
Insert a section at point.
TYPE is the section type, a symbol. Many commands that act on the
current section behave differently depending on that type. Also if
a variable ‘magit-TYPE-section-map’ exists, then use that as the
text-property ‘keymap’ of all text belonging to the section (but
this may be overwritten in subsections). TYPE can also have the
form ‘(eval FORM)’ in which case FORM is evaluated at runtime.
Optional VALUE is the value of the section, usually a string that
is required when acting on the section.
When optional HIDE is non-nil collapse the section body by default,
i.e. when first creating the section, but not when refreshing the
buffer. Otherwise, expand it by default. This can be overwritten
using ‘magit-section-set-visibility-hook’. When a section is
recreated during a refresh, then the visibility of predecessor is
inherited and HIDE is ignored (but the hook is still honored).
BODY is any number of forms that actually insert the section’s
heading and body. Optional NAME, if specified, has to be a symbol,
which is then bound to the struct of the section being inserted.
Before BODY is evaluated the ‘start’ of the section object is set
to the value of ‘point’ and after BODY was evaluated its ‘end’ is
set to the new value of ‘point’; BODY is responsible for moving
‘point’ forward.
If it turns out inside BODY that the section is empty, then
‘magit-cancel-section’ can be used to abort and remove all traces
of the partially inserted section. This can happen when creating a
section by washing Git’s output and Git didn’t actually output
anything this time around.
-- Function: magit-insert-heading &rest args
Insert the heading for the section currently being inserted.
This function should only be used inside ‘magit-insert-section’.
When called without any arguments, then just set the ‘content’ slot
of the object representing the section being inserted to a marker
at ‘point’. The section should only contain a single line when
this function is used like this.
When called with arguments ARGS, which have to be strings, then
insert those strings at point. The section should not contain any
text before this happens and afterwards it should again only
contain a single line. If the ‘face’ property is set anywhere
inside any of these strings, then insert all of them unchanged.
Otherwise use the ‘magit-section-heading’ face for all inserted
text.
The ‘content’ property of the section struct is the end of the
heading (which lasts from ‘start’ to ‘content’) and the beginning
of the body (which lasts from ‘content’ to ‘end’). If the value of
‘content’ is nil, then the section has no heading and its body
cannot be collapsed. If a section does have a heading then its
height must be exactly one line, including a trailing newline
character. This isn’t enforced; you are responsible for getting it
right. The only exception is that this function does insert a
newline character if necessary.
-- Function: magit-cancel-section
Cancel the section currently being inserted. This exits the
innermost call to ‘magit-insert-section’ and removes all traces of
what has already happened inside that call.
-- Function: magit-define-section-jumper sym title &optional value
Define an interactive function to go to section SYM. TITLE is the
displayed title of the section.

File: magit.info, Node: Section Selection, Next: Matching Sections, Prev: Creating Sections, Up: Section Plumbing
10.2.2 Section Selection
------------------------
-- Function: magit-current-section
Return the section at point.
-- Function: magit-region-sections &optional condition multiple
Return a list of the selected sections.
When the region is active and constitutes a valid section
selection, then return a list of all selected sections. This is
the case when the region begins in the heading of a section and
ends in the heading of the same section or in that of a sibling
section. If optional MULTIPLE is non-nil, then the region cannot
begin and end in the same section.
When the selection is not valid, then return nil. In this case,
most commands that can act on the selected sections will instead
act on the section at point.
When the region looks like it would in any other buffer then the
selection is invalid. When the selection is valid then the region
uses the ‘magit-section-highlight’ face. This does not apply to
diffs where things get a bit more complicated, but even here if the
region looks like it usually does, then that’s not a valid
selection as far as this function is concerned.
If optional CONDITION is non-nil, then the selection not only has
to be valid; all selected sections additionally have to match
CONDITION, or nil is returned. See ‘magit-section-match’ for the
forms CONDITION can take.
-- Function: magit-region-values &optional condition multiple
Return a list of the values of the selected sections.
Return the values that themselves would be returned by
‘magit-region-sections’ (which see).

File: magit.info, Node: Matching Sections, Prev: Section Selection, Up: Section Plumbing
10.2.3 Matching Sections
------------------------
‘M-x magit-describe-section-briefly’ (‘magit-describe-section-briefly’)
Show information about the section at point. This command is
intended for debugging purposes.
-- Function: magit-section-ident section
Return an unique identifier for SECTION. The return value has the
form ‘((TYPE . VALUE)...)’.
-- Function: magit-get-section ident &optional root
Return the section identified by IDENT. IDENT has to be a list as
returned by ‘magit-section-ident’.
-- Function: magit-section-match condition &optional section
Return ‘t’ if SECTION matches CONDITION. SECTION defaults to the
section at point. If SECTION is not specified and there also is no
section at point, then return ‘nil’.
CONDITION can take the following forms:
• ‘(CONDITION...)’
matches if any of the CONDITIONs matches.
• ‘[CLASS...]’
matches if the section’s class is the same as the first CLASS
or a subclass of that; the section’s parent class matches the
second CLASS; and so on.
• ‘[* CLASS...]’
matches sections that match ‘[CLASS...]’ and also recursively
all their child sections.
• ‘CLASS’
matches if the section’s class is the same as CLASS or a
subclass of that; regardless of the classes of the parent
sections.
Each CLASS should be a class symbol, identifying a class that
derives from ‘magit-section’. For backward compatibility CLASS can
also be a "type symbol". A section matches such a symbol if the
value of its ‘type’ slot is ‘eq’. If a type symbol has an entry in
‘magit--section-type-alist’, then a section also matches that type
if its class is a subclass of the class that corresponds to the
type as per that alist.
Note that it is not necessary to specify the complete section
lineage as printed by ‘magit-describe-section-briefly’, unless of
course you want to be that precise.
-- Function: magit-section-value-if condition &optional section
If the section at point matches CONDITION, then return its value.
If optional SECTION is non-nil then test whether that matches
instead. If there is no section at point and SECTION is nil, then
return nil. If the section does not match, then return nil.
See ‘magit-section-match’ for the forms CONDITION can take.
-- Function: magit-section-case &rest clauses
Choose among clauses on the type of the section at point.
Each clause looks like (CONDITION BODY...). The type of the
section is compared against each CONDITION; the BODY forms of the
first match are evaluated sequentially and the value of the last
form is returned. Inside BODY the symbol ‘it’ is bound to the
section at point. If no clause succeeds or if there is no section
at point return nil.
See ‘magit-section-match’ for the forms CONDITION can take.
Additionally a CONDITION of t is allowed in the final clause and
matches if no other CONDITION match, even if there is no section at
point.
-- Variable: magit-root-section
The root section in the current buffer. All other sections are
descendants of this section. The value of this variable is set by
‘magit-insert-section’ and you should never modify it.
For diff related sections a few additional tools exist.
-- Function: magit-diff-type &optional section
Return the diff type of SECTION.
The returned type is one of the symbols ‘staged’, ‘unstaged’,
‘committed’, or ‘undefined’. This type serves a similar purpose as
the general type common to all sections (which is stored in the
‘type’ slot of the corresponding ‘magit-section’ struct) but takes
additional information into account. When the SECTION isn’t
related to diffs and the buffer containing it also isn’t a
diff-only buffer, then return nil.
Currently the type can also be one of ‘tracked’ and ‘untracked’,
but these values are not handled explicitly in every place they
should be. A possible fix could be to just return nil here.
The section has to be a ‘diff’ or ‘hunk’ section, or a section
whose children are of type ‘diff’. If optional SECTION is nil,
return the diff type for the current section. In buffers whose
major mode is ‘magit-diff-mode’ SECTION is ignored and the type is
determined using other means. In ‘magit-revision-mode’ buffers the
type is always ‘committed’.
-- Function: magit-diff-scope &optional section strict
Return the diff scope of SECTION or the selected section(s).
A diff’s "scope" describes what part of a diff is selected, it is a
symbol, one of ‘region’, ‘hunk’, ‘hunks’, ‘file’, ‘files’, or
‘list’. Do not confuse this with the diff "type", as returned by
‘magit-diff-type’.
If optional SECTION is non-nil, then return the scope of that,
ignoring the sections selected by the region. Otherwise return the
scope of the current section, or if the region is active and
selects a valid group of diff related sections, the type of these
sections, i.e. ‘hunks’ or ‘files’. If SECTION (or if the current
section that is nil) is a ‘hunk’ section and the region starts and
ends inside the body of a that section, then the type is ‘region’.
If optional STRICT is non-nil then return nil if the diff type of
the section at point is ‘untracked’ or the section at point is not
actually a ‘diff’ but a ‘diffstat’ section.

File: magit.info, Node: Refreshing Buffers, Next: Conventions, Prev: Section Plumbing, Up: Plumbing
10.3 Refreshing Buffers
=======================
All commands that create a new Magit buffer or change what is being
displayed in an existing buffer do so by calling ‘magit-mode-setup’.
Among other things, that function sets the buffer local values of
‘default-directory’ (to the top-level of the repository),
‘magit-refresh-function’, and ‘magit-refresh-args’.
Buffers are refreshed by calling the function that is the local value
of ‘magit-refresh-function’ (a function named ‘magit-*-refresh-buffer’,
where ‘*’ may be something like ‘diff’) with the value of
‘magit-refresh-args’ as arguments.
-- Macro: magit-mode-setup buffer switch-func mode refresh-func
&optional refresh-args
This function displays and selects BUFFER, turns on MODE, and
refreshes a first time.
This function displays and optionally selects BUFFER by calling
‘magit-mode-display-buffer’ with BUFFER, MODE and SWITCH-FUNC as
arguments. Then it sets the local value of
‘magit-refresh-function’ to REFRESH-FUNC and that of
‘magit-refresh-args’ to REFRESH-ARGS. Finally it creates the
buffer content by calling REFRESH-FUNC with REFRESH-ARGS as
arguments.
All arguments are evaluated before switching to BUFFER.
-- Function: magit-mode-display-buffer buffer mode &optional
switch-function
This function display BUFFER in some window and select it. BUFFER
may be a buffer or a string, the name of a buffer. The buffer is
returned.
Unless BUFFER is already displayed in the selected frame, store the
previous window configuration as a buffer local value, so that it
can later be restored by ‘magit-mode-bury-buffer’.
The buffer is displayed and selected using SWITCH-FUNCTION. If
that is ‘nil’ then ‘pop-to-buffer’ is used if the current buffer’s
major mode derives from ‘magit-mode’. Otherwise ‘switch-to-buffer’
is used.
-- Variable: magit-refresh-function
The value of this buffer-local variable is the function used to
refresh the current buffer. It is called with ‘magit-refresh-args’
as arguments.
-- Variable: magit-refresh-args
The list of arguments used by ‘magit-refresh-function’ to refresh
the current buffer. ‘magit-refresh-function’ is called with these
arguments.
The value is usually set using ‘magit-mode-setup’, but in some
cases it’s also useful to provide commands that can change the
value. For example, the ‘magit-diff-refresh’ transient can be used
to change any of the arguments used to display the diff, without
having to specify again which differences should be shown, but
‘magit-diff-more-context’, ‘magit-diff-less-context’ and
‘magit-diff-default-context’ change just the ‘-U<N>’ argument. In
both case this is done by changing the value of this variable and
then calling this ‘magit-refresh-function’.

File: magit.info, Node: Conventions, Prev: Refreshing Buffers, Up: Plumbing
10.4 Conventions
================
Also see *note Completion and Confirmation::.
* Menu:
* Theming Faces::

File: magit.info, Node: Theming Faces, Up: Conventions
10.4.1 Theming Faces
--------------------
The default theme uses blue for local branches, green for remote
branches, and goldenrod (brownish yellow) for tags. When creating a new
theme, you should probably follow that example. If your theme already
uses other colors, then stick to that.
In older releases these reference faces used to have a background
color and a box around them. The basic default faces no longer do so,
to make Magit buffers much less noisy, and you should follow that
example at least with regards to boxes. (Boxes were used in the past to
work around a conflict between the highlighting overlay and text
property backgrounds. That’s no longer necessary because highlighting
no longer causes other background colors to disappear.) Alternatively
you can keep the background color and/or box, but then have to take
special care to adjust ‘magit-branch-current’ accordingly. By default
it looks mostly like ‘magit-branch-local’, but with a box (by default
the former is the only face that uses a box, exactly so that it sticks
out). If the former also uses a box, then you have to make sure that it
differs in some other way from the latter.
The most difficult faces to theme are those related to diffs,
headings, highlighting, and the region. There are faces that fall into
all four groups - expect to spend some time getting this right.
The ‘region’ face in the default theme, in both the light and dark
variants, as well as in many other themes, distributed with Emacs or by
third-parties, is very ugly. It is common to use a background color
that really sticks out, which is ugly but if that were the only problem
then it would be acceptable. Unfortunately many themes also set the
foreground color, which ensures that all text within the region is
readable. Without doing that there might be cases where some foreground
color is too close to the region background color to still be readable.
But it also means that text within the region loses all syntax
highlighting.
I consider the work that went into getting the ‘region’ face right to
be a good indicator for the general quality of a theme. My
recommendation for the ‘region’ face is this: use a background color
slightly different from the background color of the ‘default’ face, and
do not set the foreground color at all. So for a light theme you might
use a light (possibly tinted) gray as the background color of ‘default’
and a somewhat darker gray for the background of ‘region’. That should
usually be enough to not collide with the foreground color of any other
face. But if some other faces also set a light gray as background
color, then you should also make sure it doesn’t collide with those (in
some cases it might be acceptable though).
Magit only uses the ‘region’ face when the region is "invalid" by its
own definition. In a Magit buffer the region is used to either select
multiple sibling sections, so that commands which support it act on all
of these sections instead of just the current section, or to select
lines within a single hunk section. In all other cases, the section is
considered invalid and Magit won’t act on it. But such invalid sections
happen, either because the user has not moved point enough yet to make
it valid or because she wants to use a non-magit command to act on the
region, e.g. ‘kill-region’.
So using the regular ‘region’ face for invalid sections is a feature.
It tells the user that Magit won’t be able to act on it. It’s
acceptable if that face looks a bit odd and even (but less so) if it
collides with the background colors of section headings and other things
that have a background color.
Magit highlights the current section. If a section has subsections,
then all of them are highlighted. This is done using faces that have
"highlight" in their names. For most sections,
‘magit-section-highlight’ is used for both the body and the heading.
Like the ‘region’ face, it should only set the background color to
something similar to that of ‘default’. The highlight background color
must be different from both the ‘region’ background color and the
‘default’ background color.
For diff related sections Magit uses various faces to highlight
different parts of the selected section(s). Note that hunk headings,
unlike all other section headings, by default have a background color,
because it is useful to have very visible separators between hunks.
That face ‘magit-diff-hunk-heading’, should be different from both
‘magit-diff-hunk-heading-highlight’ and ‘magit-section-highlight’, as
well as from ‘magit-diff-context’ and ‘magit-diff-context-highlight’.
By default we do that by changing the foreground color. Changing the
background color would lead to complications, and there are already
enough we cannot get around. (Also note that it is generally a good
idea for section headings to always be bold, but only for sections that
have subsections).
When there is a valid region selecting diff-related sibling sections,
i.e. multiple files or hunks, then the bodies of all these sections use
the respective highlight faces, but additionally the headings instead
use one of the faces ‘magit-diff-file-heading-selection’ or
‘magit-diff-hunk-heading-selection’. These faces have to be different
from the regular highlight variants to provide explicit visual
indication that the region is active.
When theming diff related faces, start by setting the option
‘magit-diff-refine-hunk’ to ‘all’. You might personally prefer to only
refine the current hunk or not use hunk refinement at all, but some of
the users of your theme want all hunks to be refined, so you have to
cater to that.
(Also turn on ‘magit-diff-highlight-indentation’,
‘magit-diff-highlight-trailing’, and ‘magit-diff-paint-whitespace’; and
insert some whitespace errors into the code you use for testing.)
For e.g. "added lines" you have to adjust three faces:
‘magit-diff-added’, ‘magit-diff-added-highlight’, and
‘smerge-refined-added’. Make sure that the latter works well with both
of the former, as well as ‘smerge-other’ and ‘diff-added’. Then do the
same for the removed lines, context lines, lines added by us, and lines
added by them. Also make sure the respective added, removed, and
context faces use approximately the same saturation for both the
highlighted and unhighlighted variants. Also make sure the file and
diff headings work nicely with context lines (e.g. make them look
different). Line faces should set both the foreground and the
background color. For example, for added lines use two different
greens.
It’s best if the foreground color of both the highlighted and the
unhighlighted variants are the same, so you will need to have to find a
color that works well on the highlight and unhighlighted background, the
refine background, and the highlight context background. When there is
an hunk internal region, then the added- and removed-lines background
color is used only within that region. Outside the region the
highlighted context background color is used. This makes it easier to
see what is being staged. With an hunk internal region the hunk heading
is shown using ‘magit-diff-hunk-heading-selection’, and so are the thin
lines that are added around the lines that fall within the region. The
background color of that has to be distinct enough from the various
other involved background colors.
Nobody said this would be easy. If your theme restricts itself to a
certain set of colors, then you should make an exception here.
Otherwise it would be impossible to make the diffs look good in each and
every variation. Actually you might want to just stick to the default
definitions for these faces. You have been warned. Also please note
that if you do not get this right, this will in some cases look to users
like bugs in Magit - so please do it right or not at all.

File: magit.info, Node: FAQ, Next: Debugging Tools, Prev: Plumbing, Up: Top
Appendix A FAQ
**************
The next two nodes lists frequently asked questions. For a list of
frequently *and recently* asked questions, i.e. questions that haven’t
made it into the manual yet, see
<https://github.com/magit/magit/wiki/FAQ>.
Please also use the *note Debugging Tools::.
* Menu:
* FAQ - How to ...?::
* FAQ - Issues and Errors::

File: magit.info, Node: FAQ - How to ...?, Next: FAQ - Issues and Errors, Up: FAQ
A.1 FAQ - How to ...?
=====================
* Menu:
* How to show git's output?::
* How to install the gitman info manual?::
* How to show diffs for gpg-encrypted files?::
* How does branching and pushing work?::
* Can Magit be used as ediff-version-control-package?::

File: magit.info, Node: How to show git's output?, Next: How to install the gitman info manual?, Up: FAQ - How to ...?
A.1.1 How to show git’s output?
-------------------------------
To show the output of recently run git commands, press ‘$’ (or, if that
isn’t available, ‘M-x magit-process-buffer’). This will show a buffer
containing a section per git invocation; as always press ‘TAB’ to expand
or collapse them.
By default, git’s output is only inserted into the process buffer if
it is run for side-effects. When the output is consumed in some way,
also inserting it into the process buffer would be too expensive. For
debugging purposes, it’s possible to do so anyway by setting
‘magit-git-debug’ to ‘t’.

File: magit.info, Node: How to install the gitman info manual?, Next: How to show diffs for gpg-encrypted files?, Prev: How to show git's output?, Up: FAQ - How to ...?
A.1.2 How to install the gitman info manual?
--------------------------------------------
Git’s manpages can be exported as an info manual called ‘gitman’.
Magit’s own info manual links to nodes in that manual instead of the
actual manpages because Info doesn’t support linking to manpages.
Unfortunately some distributions do not install the ‘gitman’ manual
by default and you will have to install a separate documentation package
to get it.
Magit patches Info adding the ability to visit links to the ‘gitman’
Info manual by instead viewing the respective manpage. If you prefer
that approach, then set the value of ‘magit-view-git-manual-method’ to
one of the supported packages ‘man’ or ‘woman’, e.g.:
(setq magit-view-git-manual-method 'man)

File: magit.info, Node: How to show diffs for gpg-encrypted files?, Next: How does branching and pushing work?, Prev: How to install the gitman info manual?, Up: FAQ - How to ...?
A.1.3 How to show diffs for gpg-encrypted files?
------------------------------------------------
Git supports showing diffs for encrypted files, but has to be told to do
so. Since Magit just uses Git to get the diffs, configuring Git also
affects the diffs displayed inside Magit.
git config --global diff.gpg.textconv "gpg --no-tty --decrypt"
echo "*.gpg filter=gpg diff=gpg" > .gitattributes

File: magit.info, Node: How does branching and pushing work?, Next: Can Magit be used as ediff-version-control-package?, Prev: How to show diffs for gpg-encrypted files?, Up: FAQ - How to ...?
A.1.4 How does branching and pushing work?
------------------------------------------
Please see *note Branching:: and
<http://emacsair.me/2016/01/17/magit-2.4>

File: magit.info, Node: Can Magit be used as ediff-version-control-package?, Prev: How does branching and pushing work?, Up: FAQ - How to ...?
A.1.5 Can Magit be used as ‘ediff-version-control-package’?
-----------------------------------------------------------
No, it cannot. For that to work the functions ‘ediff-magit-internal’
and ‘ediff-magit-merge-internal’ would have to be implemented, and they
are not. These two functions are only used by the three commands
‘ediff-revision’, ‘ediff-merge-revisions-with-ancestor’, and
‘ediff-merge-revisions’.
These commands only delegate the task of populating buffers with
certain revisions to the "internal" functions. The equally important
task of determining which revisions are to be compared/merged is not
delegated. Instead this is done without any support whatsoever from the
version control package/system - meaning that the user has to enter the
revisions explicitly. Instead of implementing ‘ediff-magit-internal’ we
provide ‘magit-ediff-compare’, which handles both tasks like it is 2005.
The other commands ‘ediff-merge-revisions’ and
‘ediff-merge-revisions-with-ancestor’ are normally not what you want
when using a modern version control system like Git. Instead of letting
the user resolve only those conflicts which Git could not resolve on its
own, they throw away all work done by Git and then expect the user to
manually merge all conflicts, including those that had already been
resolved. That made sense back in the days when version control systems
couldn’t merge (or so I have been told), but not anymore. Once in a
blue moon you might actually want to see all conflicts, in which case
you *can* use these commands, which then use ‘ediff-vc-merge-internal’.
So we don’t actually have to implement ‘ediff-magit-merge-internal’.
Instead we provide the more useful command ‘magit-ediff-resolve’ which
only shows yet-to-be resolved conflicts.

File: magit.info, Node: FAQ - Issues and Errors, Prev: FAQ - How to ...?, Up: FAQ
A.2 FAQ - Issues and Errors
===========================
* Menu:
* Magit is slow::
* I changed several thousand files at once and now Magit is unusable::
* I am having problems committing::
* I am using MS Windows and cannot push with Magit::
* I am using OS X and SOMETHING works in shell, but not in Magit: I am using OS X and SOMETHING works in shell but not in Magit.
* Diffs contain control sequences::
* Expanding a file to show the diff causes it to disappear::
* Point is wrong in the COMMIT_EDITMSG buffer::
* The mode-line information isn't always up-to-date::
* A branch and tag sharing the same name breaks SOMETHING::
* My Git hooks work on the command-line but not inside Magit::
* git-commit-mode isn't used when committing from the command-line::
* Point ends up inside invisible text when jumping to a file-visiting buffer::

File: magit.info, Node: Magit is slow, Next: I changed several thousand files at once and now Magit is unusable, Up: FAQ - Issues and Errors
A.2.1 Magit is slow
-------------------
See *note Performance::.

File: magit.info, Node: I changed several thousand files at once and now Magit is unusable, Next: I am having problems committing, Prev: Magit is slow, Up: FAQ - Issues and Errors
A.2.2 I changed several thousand files at once and now Magit is unusable
------------------------------------------------------------------------
Magit is *currently* not expected to work under such conditions. It
sure would be nice if it did, and v2.5 will hopefully be a big step into
that direction. But it might take until v3.1 to accomplish fully
satisfactory performance, because that requires some heavy refactoring.
But for now we recommend you use the command line to complete this
one commit. Also see *note Performance::.

File: magit.info, Node: I am having problems committing, Next: I am using MS Windows and cannot push with Magit, Prev: I changed several thousand files at once and now Magit is unusable, Up: FAQ - Issues and Errors
A.2.3 I am having problems committing
-------------------------------------
That likely means that Magit is having problems finding an appropriate
emacsclient executable. See *note (with-editor)Configuring
With-Editor:: and *note (with-editor)Debugging::.

File: magit.info, Node: I am using MS Windows and cannot push with Magit, Next: I am using OS X and SOMETHING works in shell but not in Magit, Prev: I am having problems committing, Up: FAQ - Issues and Errors
A.2.4 I am using MS Windows and cannot push with Magit
------------------------------------------------------
It’s almost certain that Magit is only incidental to this issue. It is
much more likely that this is a configuration issue, even if you can
push on the command line.
Detailed setup instructions can be found at
<https://github.com/magit/magit/wiki/Pushing-with-Magit-from-Windows>.

File: magit.info, Node: I am using OS X and SOMETHING works in shell but not in Magit, Next: Diffs contain control sequences, Prev: I am using MS Windows and cannot push with Magit, Up: FAQ - Issues and Errors
A.2.5 I am using OS X and SOMETHING works in shell, but not in Magit
--------------------------------------------------------------------
This usually occurs because Emacs doesn’t have the same environment
variables as your shell. Try installing and configuring
<https://github.com/purcell/exec-path-from-shell>. By default it
synchronizes ‘$PATH’, which helps Magit find the same ‘git’ as the one
you are using on the shell.
If SOMETHING is "passphrase caching with gpg-agent for commit and/or
tag signing", then you’ll also need to synchronize ‘$GPG_AGENT_INFO’.

File: magit.info, Node: Diffs contain control sequences, Next: Expanding a file to show the diff causes it to disappear, Prev: I am using OS X and SOMETHING works in shell but not in Magit, Up: FAQ - Issues and Errors
A.2.6 Diffs contain control sequences
-------------------------------------
This happens when you configure Git to always color diffs and/or all of
its output. The valid values for relevant Git variables ‘color.ui’ and
‘color.diff’ are ‘false’, ‘true’ and ‘always’, and the default is
‘true’. You should leave it that way because then you get colorful
output in terminals by default but when git’s output is consumed by
something else, then no color control sequences are used.
If you actually use some other tool that requires setting ‘color.ui’
and/or ‘color.diff’ to ‘always’ (which is highly unlikely), then you can
override these settings just for Magit by using:
(setq magit-git-global-arguments
(nconc magit-git-global-arguments
'("-c" "color.ui=false"
"-c" "color.diff=false")))

File: magit.info, Node: Expanding a file to show the diff causes it to disappear, Next: Point is wrong in the COMMIT_EDITMSG buffer, Prev: Diffs contain control sequences, Up: FAQ - Issues and Errors
A.2.7 Expanding a file to show the diff causes it to disappear
--------------------------------------------------------------
This is probably caused by a change of a ‘diff.*’ Git variable. You
probably set that variable for a reason, and should therefore only undo
that setting in Magit by customizing ‘magit-git-global-arguments’.

File: magit.info, Node: Point is wrong in the COMMIT_EDITMSG buffer, Next: The mode-line information isn't always up-to-date, Prev: Expanding a file to show the diff causes it to disappear, Up: FAQ - Issues and Errors
A.2.8 Point is wrong in the ‘COMMIT_EDITMSG’ buffer
---------------------------------------------------
Neither Magit nor ‘git-commit‘ fiddle with point in the buffer used to
write commit messages, so something else must be doing it.
You have probably globally enabled a mode which does restore point in
file-visiting buffers. It might be a bit surprising, but when you write
a commit message, then you are actually editing a file.
So you have to figure out which package is doing. ‘saveplace’,
‘pointback’, and ‘session’ are likely candidates. These snippets might
help:
(setq session-name-disable-regexp "\\(?:\\`'\\.git/[A-Z_]+\\'\\)")
(with-eval-after-load 'pointback
(lambda ()
(when (or git-commit-mode git-rebase-mode)
(pointback-mode -1))))

File: magit.info, Node: The mode-line information isn't always up-to-date, Next: A branch and tag sharing the same name breaks SOMETHING, Prev: Point is wrong in the COMMIT_EDITMSG buffer, Up: FAQ - Issues and Errors
A.2.9 The mode-line information isn’t always up-to-date
-------------------------------------------------------
Magit is not responsible for the version control information that is
being displayed in the mode-line and looks something like ‘Git-master’.
The built-in "Version Control" package, also known as "VC", updates that
information, and can be told to do so more often:
(setq auto-revert-check-vc-info t)
But doing so isn’t good for performance. For more (overly
optimistic) information see *note (emacs)VC Mode Line::.
If you don’t really care about seeing that information in the
mode-line, but just don’t want to see _incorrect_ information, then
consider disabling VC when using Git:
(setq vc-handled-backends (delq 'Git vc-handled-backends))
Or to disable it completely:
(setq vc-handled-backends nil)

File: magit.info, Node: A branch and tag sharing the same name breaks SOMETHING, Next: My Git hooks work on the command-line but not inside Magit, Prev: The mode-line information isn't always up-to-date, Up: FAQ - Issues and Errors
A.2.10 A branch and tag sharing the same name breaks SOMETHING
--------------------------------------------------------------
Or more generally, ambiguous refnames break SOMETHING.
Magit assumes that refs are named non-ambiguously across the
"refs/heads/", "refs/tags/", and "refs/remotes/" namespaces (i.e., all
the names remain unique when those prefixes are stripped). We consider
ambiguous refnames unsupported and recommend that you use a
non-ambiguous naming scheme. However, if you do work with a repository
that has ambiguous refnames, please report any issues you encounter so
that we can investigate whether there is a simple fix.

File: magit.info, Node: My Git hooks work on the command-line but not inside Magit, Next: git-commit-mode isn't used when committing from the command-line, Prev: A branch and tag sharing the same name breaks SOMETHING, Up: FAQ - Issues and Errors
A.2.11 My Git hooks work on the command-line but not inside Magit
-----------------------------------------------------------------
When Magit calls ‘git’ it adds a few global arguments including
‘--literal-pathspecs’ and the ‘git’ process started by Magit then passes
that setting on to other ‘git’ process it starts itself. It does so by
setting the environment variable ‘GIT_LITERAL_PATHSPECS’, not by calling
subprocesses with the ‘--literal-pathspecs’. You can therefore override
this setting in hook scripts using ‘unset GIT_LITERAL_PATHSPECS’.

File: magit.info, Node: git-commit-mode isn't used when committing from the command-line, Next: Point ends up inside invisible text when jumping to a file-visiting buffer, Prev: My Git hooks work on the command-line but not inside Magit, Up: FAQ - Issues and Errors
A.2.12 ‘git-commit-mode’ isn’t used when committing from the command-line
-------------------------------------------------------------------------
The reason for this is that ‘git-commit.el’ has not been loaded yet
and/or that the server has not been started yet. These things have
always already been taken care of when you commit from Magit because in
order to do so, Magit has to be loaded and doing that involves loading
‘git-commit’ and starting the server.
If you want to commit from the command-line, then you have to take
care of these things yourself. Your ‘init.el’ file should contain:
(require 'git-commit)
(server-mode)
Instead of ‘(require ’git-commit)‘ you may also use:
(load "/path/to/magit-autoloads.el")
You might want to do that because loading ‘git-commit’ causes large
parts of Magit to be loaded.
There are also some variations of ‘(server-mode)’ that you might want
to try. Personally I use:
(use-package server
:config (or (server-running-p) (server-mode)))
Now you can use:
$ emacs&
$ EDITOR=emacsclient git commit
However you cannot use:
$ killall emacs
$ EDITOR="emacsclient --alternate-editor emacs" git commit
This will actually end up using emacs, not emacsclient. If you
do this, then can still edit the commit message but git-commit-mode
wont be used and you have to exit emacs to finish the process.
Tautology ahead. If you want to be able to use emacsclient to
connect to a running emacs instance, even though no emacs instance
is running, then you cannot use emacsclient directly.
Instead you have to create a script that does something like this:
Try to use emacsclient (without using --alternate-editor). If
that succeeds, do nothing else. Otherwise start emacs & (and
init.el must call server-start) and try to use emacsclient again.

File: magit.info, Node: Point ends up inside invisible text when jumping to a file-visiting buffer, Prev: git-commit-mode isn't used when committing from the command-line, Up: FAQ - Issues and Errors
A.2.13 Point ends up inside invisible text when jumping to a file-visiting buffer
---------------------------------------------------------------------------------
This can happen when you type RET on a hunk to visit the respective
file at the respective position. One solution to this problem is to use
global-reveal-mode. It makes sure that text around point is always
visible. If that is too drastic for your taste, then you may instead
use magit-diff-visit-file-hook to reveal the text, possibly using
reveal-post-command or for Org buffers org-reveal.

File: magit.info, Node: Debugging Tools, Next: Keystroke Index, Prev: FAQ, Up: Top
B Debugging Tools
*****************
Magit and its dependencies provide a few debugging tools, and we
appreciate it very much if you use those tools before reporting an
issue. Please include all relevant output when reporting an issue.
M-x magit-version (magit-version)
This command shows the currently used versions of Magit, Git, and
Emacs in the echo area. Non-interactively this just returns the
Magit version.
M-x magit-emacs-Q-command (magit-emacs-Q-command)
This command shows a debugging shell command in the echo area and
adds it to the kill ring. Paste that command into a shell and run
it.
This shell command starts emacs with only magit and its
dependencies loaded. Neither your configuration nor other
installed packages are loaded. This makes it easier to determine
whether some issue lays with Magit or something else.
If you run Magit from its Git repository, then you should be able
to use make emacs-Q instead of the output of this command.
M-x magit-debug-git-executable (magit-debug-git-executable)
This command displays a buffer containing information about the
available and used git executable(s), and can be useful when
investigating exec-path issues.
Also see *note Git Executable::.
M-x with-editor-debug (with-editor-debug)
This command displays a buffer containing information about the
available and used ~emacsclient executable(s), and can be useful
when investigating why Magit (or rather with-editor) cannot find
an appropriate emacsclient executable.
Also see *note (with-editor)Debugging::.
Please also see the *note FAQ::.

File: magit.info, Node: Keystroke Index, Next: Command Index, Prev: Debugging Tools, Up: Top
Appendix C Keystroke Index
**************************
[index]
* Menu:
* !: Running Git Manually.
(line 12)
* ! !: Running Git Manually.
(line 17)
* ! a: Running Git Manually.
(line 58)
* ! b: Running Git Manually.
(line 62)
* ! g: Running Git Manually.
(line 66)
* ! k: Running Git Manually.
(line 54)
* ! p: Running Git Manually.
(line 25)
* ! s: Running Git Manually.
(line 35)
* ! S: Running Git Manually.
(line 40)
* $: Viewing Git Output. (line 16)
* %: Worktree. (line 8)
* % b: Worktree. (line 13)
* % c: Worktree. (line 17)
* % g: Worktree. (line 26)
* % k: Worktree. (line 21)
* +: Log Buffer. (line 61)
* + <1>: Refreshing Diffs. (line 69)
* -: Log Buffer. (line 65)
* - <1>: Refreshing Diffs. (line 65)
* 0: Refreshing Diffs. (line 73)
* 1: Section Visibility. (line 26)
* 2: Section Visibility. (line 27)
* 3: Section Visibility. (line 28)
* 4: Section Visibility. (line 29)
* =: Log Buffer. (line 55)
* ^: Section Movement. (line 31)
* a: Applying. (line 33)
* A: Cherry Picking. (line 8)
* A A: Cherry Picking. (line 17)
* A a: Cherry Picking. (line 24)
* A A <1>: Cherry Picking. (line 90)
* A a <1>: Cherry Picking. (line 98)
* A d: Cherry Picking. (line 54)
* A h: Cherry Picking. (line 42)
* A n: Cherry Picking. (line 65)
* A s: Cherry Picking. (line 76)
* A s <1>: Cherry Picking. (line 94)
* B: Bisecting. (line 8)
* b: Blaming. (line 105)
* b <1>: Branch Commands. (line 12)
* b <2>: Editing Rebase Sequences.
(line 85)
* B B: Bisecting. (line 16)
* B b: Bisecting. (line 31)
* b b: Branch Commands. (line 49)
* b C: Branch Commands. (line 29)
* b c: Branch Commands. (line 67)
* B g: Bisecting. (line 36)
* B k: Bisecting. (line 41)
* b k: Branch Commands. (line 147)
* b l: Branch Commands. (line 74)
* b n: Branch Commands. (line 57)
* B r: Bisecting. (line 47)
* b r: Branch Commands. (line 153)
* B s: Bisecting. (line 24)
* b s: Branch Commands. (line 97)
* b S: Branch Commands. (line 125)
* b x: Branch Commands. (line 131)
* c: Blaming. (line 138)
* C: Cloning Repository. (line 20)
* c <1>: Initiating a Commit. (line 8)
* c <2>: Editing Rebase Sequences.
(line 72)
* c a: Initiating a Commit. (line 19)
* c A: Initiating a Commit. (line 67)
* C b: Cloning Repository. (line 41)
* C C: Cloning Repository. (line 29)
* c c: Initiating a Commit. (line 14)
* C d: Cloning Repository. (line 54)
* C e: Cloning Repository. (line 61)
* c e: Initiating a Commit. (line 23)
* c f: Initiating a Commit. (line 43)
* c F: Initiating a Commit. (line 51)
* C m: Cloning Repository. (line 46)
* C s: Cloning Repository. (line 34)
* c s: Initiating a Commit. (line 55)
* c S: Initiating a Commit. (line 63)
* c w: Initiating a Commit. (line 33)
* C-<return>: Visiting Files and Blobs from a Diff.
(line 51)
* C-<tab>: Section Visibility. (line 13)
* C-c C-a: Editing Commit Messages.
(line 128)
* C-c C-b: Log Buffer. (line 21)
* C-c C-b <1>: Refreshing Diffs. (line 91)
* C-c C-c: Transient Commands. (line 18)
* C-c C-c <1>: Select from Log. (line 20)
* C-c C-c <2>: Editing Commit Messages.
(line 19)
* C-c C-c <3>: Editing Rebase Sequences.
(line 6)
* C-c C-d: Refreshing Diffs. (line 81)
* C-c C-d <1>: Editing Commit Messages.
(line 57)
* C-c C-e: Commands Available in Diffs.
(line 25)
* C-c C-f: Log Buffer. (line 25)
* C-c C-f <1>: Refreshing Diffs. (line 95)
* C-c C-i: Editing Commit Messages.
(line 153)
* C-c C-k: Select from Log. (line 26)
* C-c C-k <1>: Editing Commit Messages.
(line 24)
* C-c C-k <2>: Editing Rebase Sequences.
(line 11)
* C-c C-n: Log Buffer. (line 29)
* C-c C-o: Editing Commit Messages.
(line 144)
* C-c C-p: Editing Commit Messages.
(line 148)
* C-c C-r: Editing Commit Messages.
(line 132)
* C-c C-s: Editing Commit Messages.
(line 136)
* C-c C-t: Commands Available in Diffs.
(line 14)
* C-c C-t <1>: Editing Commit Messages.
(line 140)
* C-c C-w: Editing Commit Messages.
(line 63)
* C-c M-g: Minor Mode for Buffers Visiting Files.
(line 54)
* C-c M-g B: Blaming. (line 21)
* C-c M-g b: Blaming. (line 32)
* C-c M-g B <1>: Minor Mode for Buffers Visiting Files.
(line 123)
* C-c M-g B b: Blaming. (line 33)
* C-c M-g B e: Blaming. (line 67)
* C-c M-g B f: Blaming. (line 58)
* C-c M-g B r: Blaming. (line 49)
* C-c M-g c: Minor Mode for Buffers Visiting Files.
(line 68)
* C-c M-g D: Minor Mode for Buffers Visiting Files.
(line 75)
* C-c M-g d: Minor Mode for Buffers Visiting Files.
(line 86)
* C-c M-g e: Blaming. (line 66)
* C-c M-g e <1>: Minor Mode for Buffers Visiting Files.
(line 136)
* C-c M-g f: Blaming. (line 57)
* C-c M-g L: Minor Mode for Buffers Visiting Files.
(line 96)
* C-c M-g l: Minor Mode for Buffers Visiting Files.
(line 107)
* C-c M-g p: Minor Mode for Buffers Visiting Files.
(line 146)
* C-c M-g r: Blaming. (line 48)
* C-c M-g s: Minor Mode for Buffers Visiting Files.
(line 59)
* C-c M-g t: Minor Mode for Buffers Visiting Files.
(line 114)
* C-c M-g u: Minor Mode for Buffers Visiting Files.
(line 63)
* C-c M-s: Editing Commit Messages.
(line 35)
* C-w: Common Commands. (line 27)
* C-x g: Status Buffer. (line 22)
* C-x u: Editing Rebase Sequences.
(line 94)
* d: Diffing. (line 21)
* D: Refreshing Diffs. (line 11)
* d c: Diffing. (line 69)
* d d: Diffing. (line 27)
* D f: Refreshing Diffs. (line 46)
* D F: Refreshing Diffs. (line 51)
* D g: Refreshing Diffs. (line 17)
* d p: Diffing. (line 61)
* d r: Diffing. (line 31)
* D r: Refreshing Diffs. (line 41)
* d s: Diffing. (line 51)
* D s: Refreshing Diffs. (line 22)
* d t: Diffing. (line 74)
* D t: Refreshing Diffs. (line 37)
* d u: Diffing. (line 57)
* d w: Diffing. (line 45)
* D w: Refreshing Diffs. (line 29)
* DEL: Log Buffer. (line 45)
* DEL <1>: Commands Available in Diffs.
(line 60)
* DEL <2>: Blaming. (line 92)
* DEL <3>: Editing Rebase Sequences.
(line 28)
* e: Ediffing. (line 9)
* E: Ediffing. (line 21)
* e <1>: Editing Rebase Sequences.
(line 55)
* E c: Ediffing. (line 65)
* E i: Ediffing. (line 57)
* E m: Ediffing. (line 35)
* E r: Ediffing. (line 26)
* E s: Ediffing. (line 48)
* E u: Ediffing. (line 53)
* E w: Ediffing. (line 61)
* E z: Ediffing. (line 69)
* f: Editing Rebase Sequences.
(line 63)
* f <1>: Fetching. (line 9)
* F: Pulling. (line 9)
* f a: Fetching. (line 46)
* f C: Branch Commands. (line 30)
* F C: Branch Commands. (line 31)
* f e: Fetching. (line 32)
* F e: Pulling. (line 31)
* f m: Fetching. (line 50)
* f o: Fetching. (line 36)
* f p: Fetching. (line 15)
* F p: Pulling. (line 14)
* f r: Fetching. (line 41)
* f u: Fetching. (line 24)
* F u: Pulling. (line 23)
* g: Automatic Refreshing of Magit Buffers.
(line 24)
* G: Automatic Refreshing of Magit Buffers.
(line 33)
* j: Commands Available in Diffs.
(line 45)
* k: Viewing Git Output. (line 24)
* k <1>: Applying. (line 40)
* k <2>: Editing Rebase Sequences.
(line 68)
* k <3>: Stashing. (line 96)
* l: Logging. (line 29)
* L: Refreshing Logs. (line 11)
* L <1>: Log Buffer. (line 6)
* L <2>: Log Margin. (line 47)
* l <1>: Editing Rebase Sequences.
(line 115)
* l a: Logging. (line 60)
* l b: Logging. (line 56)
* L d: Log Margin. (line 64)
* L g: Refreshing Logs. (line 17)
* l h: Logging. (line 48)
* l H: Reflog. (line 19)
* l l: Logging. (line 35)
* l L: Logging. (line 52)
* L L: Log Margin. (line 56)
* L l: Log Margin. (line 60)
* l o: Logging. (line 41)
* l O: Reflog. (line 15)
* l r: Reflog. (line 11)
* L s: Refreshing Logs. (line 22)
* L t: Refreshing Logs. (line 37)
* L w: Refreshing Logs. (line 29)
* m: Merging. (line 9)
* M: Remote Commands. (line 13)
* m a: Merging. (line 45)
* m a <1>: Merging. (line 95)
* M a: Remote Commands. (line 50)
* M C: Remote Commands. (line 33)
* m e: Merging. (line 31)
* m i: Merging. (line 58)
* M k: Remote Commands. (line 65)
* m m: Merging. (line 18)
* m m <1>: Merging. (line 89)
* m n: Merging. (line 38)
* m p: Merging. (line 81)
* M p: Remote Commands. (line 69)
* M P: Remote Commands. (line 74)
* M r: Remote Commands. (line 55)
* m s: Merging. (line 72)
* M u: Remote Commands. (line 60)
* M-1: Section Visibility. (line 33)
* M-2: Section Visibility. (line 34)
* M-3: Section Visibility. (line 35)
* M-4: Section Visibility. (line 36)
* M-<tab>: Section Visibility. (line 17)
* M-n: Section Movement. (line 26)
* M-n <1>: Editing Commit Messages.
(line 45)
* M-n <2>: Editing Rebase Sequences.
(line 47)
* M-p: Section Movement. (line 20)
* M-p <1>: Editing Commit Messages.
(line 39)
* M-p <2>: Editing Rebase Sequences.
(line 43)
* M-w: Blaming. (line 130)
* M-w <1>: Common Commands. (line 10)
* M-x magit-debug-git-executable: Git Executable. (line 45)
* M-x magit-debug-git-executable <1>: Debugging Tools. (line 30)
* M-x magit-describe-section-briefly: Section Types and Values.
(line 13)
* M-x magit-describe-section-briefly <1>: Matching Sections. (line 6)
* M-x magit-emacs-Q-command: Debugging Tools. (line 16)
* M-x magit-init: Creating Repository. (line 6)
* M-x magit-reset-index: Staging and Unstaging.
(line 87)
* M-x magit-reverse-in-index: Staging and Unstaging.
(line 62)
* M-x magit-stage-file: Staging from File-Visiting Buffers.
(line 10)
* M-x magit-toggle-buffer-lock: Modes and Buffers. (line 17)
* M-x magit-unstage-file: Staging from File-Visiting Buffers.
(line 18)
* M-x magit-version: Git Executable. (line 17)
* M-x magit-version <1>: Debugging Tools. (line 10)
* M-x magit-wip-commit: Wip Modes. (line 88)
* M-x with-editor-debug: Debugging Tools. (line 38)
* MM: Editing Rebase Sequences.
(line 125)
* Mt: Editing Rebase Sequences.
(line 132)
* n: Section Movement. (line 16)
* n <1>: Blaming. (line 109)
* N: Blaming. (line 113)
* n <2>: Editing Rebase Sequences.
(line 39)
* n <3>: Minor Mode for Buffers Visiting Blobs.
(line 16)
* o: Submodule Transient. (line 6)
* O: Subtree. (line 8)
* o a: Submodule Transient. (line 20)
* o d: Submodule Transient. (line 50)
* O e: Subtree. (line 42)
* O e p: Subtree. (line 54)
* O e s: Subtree. (line 59)
* o f: Submodule Transient. (line 58)
* O i: Subtree. (line 13)
* O i a: Subtree. (line 25)
* O i c: Subtree. (line 30)
* O i f: Subtree. (line 38)
* O i m: Subtree. (line 34)
* o l: Submodule Transient. (line 54)
* o p: Submodule Transient. (line 34)
* o r: Submodule Transient. (line 27)
* o s: Submodule Transient. (line 44)
* o u: Submodule Transient. (line 39)
* p: Section Movement. (line 10)
* p <1>: Blaming. (line 117)
* P: Blaming. (line 121)
* p <2>: Editing Rebase Sequences.
(line 35)
* P <1>: Pushing. (line 9)
* p <3>: Minor Mode for Buffers Visiting Blobs.
(line 12)
* P C: Branch Commands. (line 32)
* P e: Pushing. (line 31)
* P m: Pushing. (line 50)
* P o: Pushing. (line 36)
* P p: Pushing. (line 15)
* P r: Pushing. (line 41)
* P t: Pushing. (line 58)
* P T: Pushing. (line 66)
* P u: Pushing. (line 23)
* q: Quitting Windows. (line 6)
* q <1>: Log Buffer. (line 14)
* q <2>: Blaming. (line 125)
* q <3>: Minor Mode for Buffers Visiting Blobs.
(line 20)
* r: Rebasing. (line 9)
* r <1>: Editing Rebase Sequences.
(line 51)
* r a: Rebasing. (line 124)
* r e: Rebasing. (line 45)
* r e <1>: Rebasing. (line 119)
* r f: Rebasing. (line 85)
* r i: Rebasing. (line 81)
* r k: Rebasing. (line 100)
* r m: Rebasing. (line 90)
* r p: Rebasing. (line 28)
* r r: Rebasing. (line 107)
* r s: Rebasing. (line 51)
* r s <1>: Rebasing. (line 114)
* r u: Rebasing. (line 37)
* r w: Rebasing. (line 95)
* RET: References Buffer. (line 179)
* RET <1>: Visiting Files and Blobs from a Diff.
(line 8)
* RET <2>: Blaming. (line 78)
* RET <3>: Editing Rebase Sequences.
(line 16)
* s: Staging and Unstaging.
(line 28)
* S: Staging and Unstaging.
(line 36)
* s <1>: Editing Rebase Sequences.
(line 59)
* S-<tab>: Section Visibility. (line 22)
* SPC: Log Buffer. (line 35)
* SPC <1>: Commands Available in Diffs.
(line 56)
* SPC <2>: Blaming. (line 82)
* SPC <3>: Editing Rebase Sequences.
(line 21)
* t: Editing Rebase Sequences.
(line 119)
* t <1>: Tagging. (line 8)
* T: Notes. (line 8)
* T a: Notes. (line 52)
* T c: Notes. (line 47)
* t k: Tagging. (line 40)
* T m: Notes. (line 38)
* t p: Tagging. (line 47)
* T p: Notes. (line 30)
* t r: Tagging. (line 19)
* T r: Notes. (line 22)
* t t: Tagging. (line 14)
* T T: Notes. (line 14)
* TAB: Section Visibility. (line 9)
* u: Staging and Unstaging.
(line 43)
* U: Staging and Unstaging.
(line 52)
* v: Applying. (line 44)
* V: Reverting. (line 6)
* V A: Reverting. (line 31)
* V a: Reverting. (line 39)
* V s: Reverting. (line 35)
* V V: Reverting. (line 15)
* V v: Reverting. (line 21)
* W: Plain Patches. (line 6)
* w: Maildir Patches. (line 8)
* w a: Plain Patches. (line 21)
* w a <1>: Maildir Patches. (line 25)
* w a <2>: Maildir Patches. (line 43)
* W c: Plain Patches. (line 12)
* w m: Maildir Patches. (line 21)
* W s: Plain Patches. (line 28)
* w s: Maildir Patches. (line 38)
* w w: Maildir Patches. (line 14)
* w w <1>: Maildir Patches. (line 34)
* x: Editing Rebase Sequences.
(line 76)
* x <1>: Resetting. (line 8)
* X f: Resetting. (line 44)
* X h: Resetting. (line 26)
* X i: Resetting. (line 31)
* X m: Resetting. (line 15)
* X s: Resetting. (line 20)
* X w: Resetting. (line 38)
* X w <1>: Wip Modes. (line 66)
* Y: Cherries. (line 17)
* y: References Buffer. (line 6)
* y <1>: Editing Rebase Sequences.
(line 90)
* y c: References Buffer. (line 26)
* y o: References Buffer. (line 32)
* y y: References Buffer. (line 21)
* z: Stashing. (line 8)
* z a: Stashing. (line 59)
* z b: Stashing. (line 81)
* z B: Stashing. (line 86)
* z f: Stashing. (line 92)
* z i: Stashing. (line 21)
* z I: Stashing. (line 47)
* z k: Stashing. (line 72)
* z l: Stashing. (line 100)
* z p: Stashing. (line 65)
* z v: Stashing. (line 77)
* z w: Stashing. (line 26)
* z W: Stashing. (line 52)
* z x: Stashing. (line 33)
* z z: Stashing. (line 14)
* z Z: Stashing. (line 40)

File: magit.info, Node: Command Index, Next: Function Index, Prev: Keystroke Index, Up: Top
Appendix D Command Index
************************
[index]
* Menu:
* forward-line: Editing Rebase Sequences.
(line 39)
* git-commit-ack: Editing Commit Messages.
(line 128)
* git-commit-cc: Editing Commit Messages.
(line 144)
* git-commit-next-message: Editing Commit Messages.
(line 45)
* git-commit-prev-message: Editing Commit Messages.
(line 39)
* git-commit-reported: Editing Commit Messages.
(line 148)
* git-commit-review: Editing Commit Messages.
(line 132)
* git-commit-save-message: Editing Commit Messages.
(line 35)
* git-commit-signoff: Editing Commit Messages.
(line 136)
* git-commit-suggested: Editing Commit Messages.
(line 153)
* git-commit-test: Editing Commit Messages.
(line 140)
* git-rebase-backward-line: Editing Rebase Sequences.
(line 35)
* git-rebase-break: Editing Rebase Sequences.
(line 85)
* git-rebase-edit: Editing Rebase Sequences.
(line 55)
* git-rebase-exec: Editing Rebase Sequences.
(line 76)
* git-rebase-fixup: Editing Rebase Sequences.
(line 63)
* git-rebase-insert: Editing Rebase Sequences.
(line 90)
* git-rebase-kill-line: Editing Rebase Sequences.
(line 68)
* git-rebase-label: Editing Rebase Sequences.
(line 115)
* git-rebase-merge: Editing Rebase Sequences.
(line 125)
* git-rebase-merge-toggle-editmsg: Editing Rebase Sequences.
(line 132)
* git-rebase-move-line-down: Editing Rebase Sequences.
(line 47)
* git-rebase-move-line-up: Editing Rebase Sequences.
(line 43)
* git-rebase-pick: Editing Rebase Sequences.
(line 72)
* git-rebase-reset: Editing Rebase Sequences.
(line 119)
* git-rebase-reword: Editing Rebase Sequences.
(line 51)
* git-rebase-show-commit: Editing Rebase Sequences.
(line 16)
* git-rebase-show-or-scroll-down: Editing Rebase Sequences.
(line 28)
* git-rebase-show-or-scroll-up: Editing Rebase Sequences.
(line 21)
* git-rebase-squash: Editing Rebase Sequences.
(line 59)
* git-rebase-undo: Editing Rebase Sequences.
(line 94)
* ido-enter-magit-status: Status Buffer. (line 72)
* magit-am: Maildir Patches. (line 8)
* magit-am-abort: Maildir Patches. (line 43)
* magit-am-apply-maildir: Maildir Patches. (line 21)
* magit-am-apply-patches: Maildir Patches. (line 14)
* magit-am-continue: Maildir Patches. (line 34)
* magit-am-skip: Maildir Patches. (line 38)
* magit-apply: Applying. (line 33)
* magit-bisect: Bisecting. (line 8)
* magit-bisect-bad: Bisecting. (line 31)
* magit-bisect-good: Bisecting. (line 36)
* magit-bisect-reset: Bisecting. (line 47)
* magit-bisect-run: Bisecting. (line 24)
* magit-bisect-skip: Bisecting. (line 41)
* magit-bisect-start: Bisecting. (line 16)
* magit-blame: Blaming. (line 21)
* magit-blame <1>: Blaming. (line 105)
* magit-blame <2>: Minor Mode for Buffers Visiting Files.
(line 123)
* magit-blame-addition: Blaming. (line 32)
* magit-blame-addition <1>: Blaming. (line 33)
* magit-blame-copy-hash: Blaming. (line 130)
* magit-blame-cycle-style: Blaming. (line 138)
* magit-blame-echo: Blaming. (line 66)
* magit-blame-echo <1>: Blaming. (line 67)
* magit-blame-next-chunk: Blaming. (line 109)
* magit-blame-next-chunk-same-commit: Blaming. (line 113)
* magit-blame-previous-chunk: Blaming. (line 117)
* magit-blame-previous-chunk-same-commit: Blaming. (line 121)
* magit-blame-quit: Blaming. (line 125)
* magit-blame-removal: Blaming. (line 48)
* magit-blame-removal <1>: Blaming. (line 49)
* magit-blame-reverse: Blaming. (line 57)
* magit-blame-reverse <1>: Blaming. (line 58)
* magit-blob-next: Minor Mode for Buffers Visiting Blobs.
(line 16)
* magit-blob-previous: Minor Mode for Buffers Visiting Files.
(line 146)
* magit-blob-previous <1>: Minor Mode for Buffers Visiting Blobs.
(line 12)
* magit-branch: Branch Commands. (line 12)
* magit-branch-and-checkout: Branch Commands. (line 67)
* magit-branch-checkout: Branch Commands. (line 74)
* magit-branch-configure: Branch Commands. (line 29)
* magit-branch-configure <1>: Branch Commands. (line 30)
* magit-branch-configure <2>: Branch Commands. (line 31)
* magit-branch-configure <3>: Branch Commands. (line 32)
* magit-branch-create: Branch Commands. (line 57)
* magit-branch-delete: Branch Commands. (line 147)
* magit-branch-or-checkout: Branch Commands. (line 257)
* magit-branch-orphan: Branch Commands. (line 252)
* magit-branch-rename: Branch Commands. (line 153)
* magit-branch-reset: Branch Commands. (line 131)
* magit-branch-shelve: Auxiliary Branch Commands.
(line 9)
* magit-branch-spinoff: Branch Commands. (line 97)
* magit-branch-spinout: Branch Commands. (line 125)
* magit-branch-unshelve: Auxiliary Branch Commands.
(line 20)
* magit-checkout: Branch Commands. (line 49)
* magit-cherry: Cherries. (line 17)
* magit-cherry-apply: Cherry Picking. (line 24)
* magit-cherry-copy: Cherry Picking. (line 17)
* magit-cherry-donate: Cherry Picking. (line 54)
* magit-cherry-harvest: Cherry Picking. (line 42)
* magit-cherry-pick: Cherry Picking. (line 8)
* magit-cherry-spinoff: Cherry Picking. (line 76)
* magit-cherry-spinout: Cherry Picking. (line 65)
* magit-clone: Cloning Repository. (line 20)
* magit-clone-bare: Cloning Repository. (line 41)
* magit-clone-mirror: Cloning Repository. (line 46)
* magit-clone-regular: Cloning Repository. (line 29)
* magit-clone-shallow: Cloning Repository. (line 34)
* magit-clone-shallow-exclude: Cloning Repository. (line 61)
* magit-clone-shallow-since: Cloning Repository. (line 54)
* magit-commit: Initiating a Commit. (line 8)
* magit-commit <1>: Minor Mode for Buffers Visiting Files.
(line 68)
* magit-commit-amend: Initiating a Commit. (line 19)
* magit-commit-augment: Initiating a Commit. (line 67)
* magit-commit-create: Initiating a Commit. (line 14)
* magit-commit-extend: Initiating a Commit. (line 23)
* magit-commit-fixup: Initiating a Commit. (line 43)
* magit-commit-instant-fixup: Initiating a Commit. (line 51)
* magit-commit-instant-squash: Initiating a Commit. (line 63)
* magit-commit-reword: Initiating a Commit. (line 33)
* magit-commit-squash: Initiating a Commit. (line 55)
* magit-copy-buffer-revision: Common Commands. (line 27)
* magit-copy-section-value: Common Commands. (line 10)
* magit-cycle-margin-style: Log Margin. (line 60)
* magit-debug-git-executable: Git Executable. (line 45)
* magit-debug-git-executable <1>: Debugging Tools. (line 30)
* magit-describe-section-briefly: Section Types and Values.
(line 13)
* magit-describe-section-briefly <1>: Matching Sections. (line 6)
* magit-diff: Diffing. (line 21)
* magit-diff <1>: Minor Mode for Buffers Visiting Files.
(line 75)
* magit-diff-buffer-file: Minor Mode for Buffers Visiting Files.
(line 86)
* magit-diff-default-context: Refreshing Diffs. (line 73)
* magit-diff-dwim: Diffing. (line 27)
* magit-diff-edit-hunk-commit: Commands Available in Diffs.
(line 25)
* magit-diff-flip-revs: Refreshing Diffs. (line 46)
* magit-diff-less-context: Refreshing Diffs. (line 65)
* magit-diff-more-context: Refreshing Diffs. (line 69)
* magit-diff-paths: Diffing. (line 61)
* magit-diff-range: Diffing. (line 31)
* magit-diff-refresh: Refreshing Diffs. (line 11)
* magit-diff-refresh <1>: Refreshing Diffs. (line 17)
* magit-diff-save-default-arguments: Refreshing Diffs. (line 29)
* magit-diff-set-default-arguments: Refreshing Diffs. (line 22)
* magit-diff-show-or-scroll-down: Log Buffer. (line 45)
* magit-diff-show-or-scroll-down <1>: Blaming. (line 92)
* magit-diff-show-or-scroll-up: Log Buffer. (line 35)
* magit-diff-show-or-scroll-up <1>: Blaming. (line 82)
* magit-diff-staged: Diffing. (line 51)
* magit-diff-switch-range-type: Refreshing Diffs. (line 41)
* magit-diff-toggle-file-filter: Refreshing Diffs. (line 51)
* magit-diff-toggle-refine-hunk: Refreshing Diffs. (line 37)
* magit-diff-trace-definition: Commands Available in Diffs.
(line 14)
* magit-diff-unstaged: Diffing. (line 57)
* magit-diff-visit-file: Visiting Files and Blobs from a Diff.
(line 8)
* magit-diff-visit-file-other-frame: Visiting Files and Blobs from a Diff.
(line 74)
* magit-diff-visit-file-other-window: Visiting Files and Blobs from a Diff.
(line 73)
* magit-diff-visit-file-worktree: Visiting Files and Blobs from a Diff.
(line 51)
* magit-diff-visit-worktree-file-other-frame: Visiting Files and Blobs from a Diff.
(line 76)
* magit-diff-visit-worktree-file-other-window: Visiting Files and Blobs from a Diff.
(line 75)
* magit-diff-while-committing: Refreshing Diffs. (line 81)
* magit-diff-while-committing <1>: Editing Commit Messages.
(line 57)
* magit-diff-working-tree: Diffing. (line 45)
* magit-discard: Applying. (line 40)
* magit-dispatch: Transient Commands. (line 18)
* magit-ediff: Ediffing. (line 21)
* magit-ediff-compare: Ediffing. (line 26)
* magit-ediff-dwim: Ediffing. (line 9)
* magit-ediff-resolve: Ediffing. (line 35)
* magit-ediff-show-commit: Ediffing. (line 65)
* magit-ediff-show-staged: Ediffing. (line 57)
* magit-ediff-show-stash: Ediffing. (line 69)
* magit-ediff-show-unstaged: Ediffing. (line 53)
* magit-ediff-show-working-tree: Ediffing. (line 61)
* magit-ediff-stage: Ediffing. (line 48)
* magit-edit-line-commit: Minor Mode for Buffers Visiting Files.
(line 136)
* magit-emacs-Q-command: Debugging Tools. (line 16)
* magit-fetch: Fetching. (line 9)
* magit-fetch-all: Fetching. (line 46)
* magit-fetch-branch: Fetching. (line 36)
* magit-fetch-from-pushremote: Fetching. (line 15)
* magit-fetch-from-upstream: Fetching. (line 24)
* magit-fetch-modules: Submodule Transient. (line 58)
* magit-fetch-other: Fetching. (line 32)
* magit-fetch-refspec: Fetching. (line 41)
* magit-file-checkout: Resetting. (line 44)
* magit-file-checkout <1>: Minor Mode for Buffers Visiting Files.
(line 165)
* magit-file-delete: Minor Mode for Buffers Visiting Files.
(line 157)
* magit-file-dispatch: Minor Mode for Buffers Visiting Files.
(line 54)
* magit-file-rename: Minor Mode for Buffers Visiting Files.
(line 153)
* magit-file-untrack: Minor Mode for Buffers Visiting Files.
(line 161)
* magit-find-file: General-Purpose Visit Commands.
(line 9)
* magit-find-file-other-frame: General-Purpose Visit Commands.
(line 21)
* magit-find-file-other-window: General-Purpose Visit Commands.
(line 15)
* magit-git-command: Running Git Manually.
(line 25)
* magit-git-command-topdir: Running Git Manually.
(line 17)
* magit-go-backward: Log Buffer. (line 21)
* magit-go-backward <1>: Refreshing Diffs. (line 91)
* magit-go-forward: Log Buffer. (line 25)
* magit-go-forward <1>: Refreshing Diffs. (line 95)
* magit-init: Creating Repository. (line 6)
* magit-jump-to-diffstat-or-diff: Commands Available in Diffs.
(line 45)
* magit-kill-this-buffer: Minor Mode for Buffers Visiting Blobs.
(line 20)
* magit-list-repositories: Repository List. (line 6)
* magit-list-submodules: Listing Submodules. (line 13)
* magit-list-submodules <1>: Submodule Transient. (line 54)
* magit-log: Logging. (line 29)
* magit-log <1>: Minor Mode for Buffers Visiting Files.
(line 96)
* magit-log-all: Logging. (line 60)
* magit-log-all-branches: Logging. (line 56)
* magit-log-branches: Logging. (line 52)
* magit-log-buffer-file: Minor Mode for Buffers Visiting Files.
(line 107)
* magit-log-bury-buffer: Log Buffer. (line 14)
* magit-log-current: Logging. (line 35)
* magit-log-double-commit-limit: Log Buffer. (line 61)
* magit-log-half-commit-limit: Log Buffer. (line 65)
* magit-log-head: Logging. (line 48)
* magit-log-move-to-parent: Log Buffer. (line 29)
* magit-log-other: Logging. (line 41)
* magit-log-refresh: Refreshing Logs. (line 11)
* magit-log-refresh <1>: Refreshing Logs. (line 17)
* magit-log-refresh <2>: Log Buffer. (line 6)
* magit-log-save-default-arguments: Refreshing Logs. (line 29)
* magit-log-select-pick: Select from Log. (line 20)
* magit-log-select-quit: Select from Log. (line 26)
* magit-log-set-default-arguments: Refreshing Logs. (line 22)
* magit-log-toggle-commit-limit: Log Buffer. (line 55)
* magit-log-trace-definition: Minor Mode for Buffers Visiting Files.
(line 114)
* magit-margin-settings: Log Margin. (line 47)
* magit-merge: Merging. (line 9)
* magit-merge <1>: Merging. (line 89)
* magit-merge-abort: Merging. (line 95)
* magit-merge-absorb: Merging. (line 45)
* magit-merge-editmsg: Merging. (line 31)
* magit-merge-into: Merging. (line 58)
* magit-merge-nocommit: Merging. (line 38)
* magit-merge-plain: Merging. (line 18)
* magit-merge-preview: Merging. (line 81)
* magit-merge-squash: Merging. (line 72)
* magit-mode-bury-buffer: Quitting Windows. (line 6)
* magit-notes: Notes. (line 8)
* magit-notes-edit: Notes. (line 14)
* magit-notes-merge: Notes. (line 38)
* magit-notes-merge-abort: Notes. (line 52)
* magit-notes-merge-commit: Notes. (line 47)
* magit-notes-prune: Notes. (line 30)
* magit-notes-remove: Notes. (line 22)
* magit-patch: Plain Patches. (line 6)
* magit-patch-apply: Plain Patches. (line 21)
* magit-patch-apply <1>: Maildir Patches. (line 25)
* magit-patch-create: Plain Patches. (line 12)
* magit-patch-save: Plain Patches. (line 28)
* magit-pop-revision-stack: Editing Commit Messages.
(line 63)
* magit-process: Viewing Git Output. (line 16)
* magit-process-kill: Viewing Git Output. (line 24)
* magit-pull: Pulling. (line 9)
* magit-pull-branch: Pulling. (line 31)
* magit-pull-from-pushremote: Pulling. (line 14)
* magit-pull-from-upstream: Pulling. (line 23)
* magit-push: Pushing. (line 9)
* magit-push-current: Pushing. (line 31)
* magit-push-current-to-pushremote: Pushing. (line 15)
* magit-push-current-to-upstream: Pushing. (line 23)
* magit-push-implicitly args: Pushing. (line 74)
* magit-push-matching: Pushing. (line 50)
* magit-push-other: Pushing. (line 36)
* magit-push-refspecs: Pushing. (line 41)
* magit-push-tag: Pushing. (line 66)
* magit-push-tags: Pushing. (line 58)
* magit-push-to-remote remote args: Pushing. (line 85)
* magit-rebase: Rebasing. (line 9)
* magit-rebase-abort: Rebasing. (line 124)
* magit-rebase-autosquash: Rebasing. (line 85)
* magit-rebase-branch: Rebasing. (line 45)
* magit-rebase-continue: Rebasing. (line 107)
* magit-rebase-edit: Rebasing. (line 119)
* magit-rebase-edit-commit: Rebasing. (line 90)
* magit-rebase-interactive: Rebasing. (line 81)
* magit-rebase-onto-pushremote: Rebasing. (line 28)
* magit-rebase-onto-upstream: Rebasing. (line 37)
* magit-rebase-remove-commit: Rebasing. (line 100)
* magit-rebase-reword-commit: Rebasing. (line 95)
* magit-rebase-skip: Rebasing. (line 114)
* magit-rebase-subset: Rebasing. (line 51)
* magit-reflog-current: Reflog. (line 11)
* magit-reflog-head: Reflog. (line 19)
* magit-reflog-other: Reflog. (line 15)
* magit-refresh: Automatic Refreshing of Magit Buffers.
(line 24)
* magit-refresh-all: Automatic Refreshing of Magit Buffers.
(line 33)
* magit-remote: Remote Commands. (line 13)
* magit-remote-add: Remote Commands. (line 50)
* magit-remote-configure: Remote Commands. (line 33)
* magit-remote-prune: Remote Commands. (line 69)
* magit-remote-prune-refspecs: Remote Commands. (line 74)
* magit-remote-remove: Remote Commands. (line 65)
* magit-remote-rename: Remote Commands. (line 55)
* magit-remote-set-url: Remote Commands. (line 60)
* magit-reset-hard: Resetting. (line 26)
* magit-reset-index: Staging and Unstaging.
(line 87)
* magit-reset-index <1>: Resetting. (line 31)
* magit-reset-mixed: Resetting. (line 15)
* magit-reset-quickly: Resetting. (line 8)
* magit-reset-soft: Resetting. (line 20)
* magit-reset-worktree: Resetting. (line 38)
* magit-reset-worktree <1>: Wip Modes. (line 66)
* magit-reverse: Applying. (line 44)
* magit-reverse-in-index: Staging and Unstaging.
(line 62)
* magit-revert: Reverting. (line 6)
* magit-revert-and-commit: Reverting. (line 15)
* magit-revert-no-commit: Reverting. (line 21)
* magit-run: Running Git Manually.
(line 12)
* magit-run-git-gui: Running Git Manually.
(line 66)
* magit-run-gitk: Running Git Manually.
(line 54)
* magit-run-gitk-all: Running Git Manually.
(line 58)
* magit-run-gitk-branches: Running Git Manually.
(line 62)
* magit-section-backward: Section Movement. (line 10)
* magit-section-backward-siblings: Section Movement. (line 20)
* magit-section-cycle: Section Visibility. (line 13)
* magit-section-cycle-diffs: Section Visibility. (line 17)
* magit-section-cycle-global: Section Visibility. (line 22)
* magit-section-forward: Section Movement. (line 16)
* magit-section-forward-siblings: Section Movement. (line 26)
* magit-section-hide: Section Visibility. (line 49)
* magit-section-hide-children: Section Visibility. (line 64)
* magit-section-show: Section Visibility. (line 45)
* magit-section-show-children: Section Visibility. (line 58)
* magit-section-show-headings: Section Visibility. (line 53)
* magit-section-show-level-1: Section Visibility. (line 26)
* magit-section-show-level-1-all: Section Visibility. (line 33)
* magit-section-show-level-2: Section Visibility. (line 27)
* magit-section-show-level-2-all: Section Visibility. (line 34)
* magit-section-show-level-3: Section Visibility. (line 28)
* magit-section-show-level-3-all: Section Visibility. (line 35)
* magit-section-show-level-4: Section Visibility. (line 29)
* magit-section-show-level-4-all: Section Visibility. (line 36)
* magit-section-toggle: Section Visibility. (line 9)
* magit-section-toggle-children: Section Visibility. (line 68)
* magit-section-up: Section Movement. (line 31)
* magit-sequence-abort: Cherry Picking. (line 98)
* magit-sequence-abort <1>: Reverting. (line 39)
* magit-sequence-continue: Cherry Picking. (line 90)
* magit-sequence-continue <1>: Reverting. (line 31)
* magit-sequence-skip: Cherry Picking. (line 94)
* magit-sequence-skip <1>: Reverting. (line 35)
* magit-shell-command: Running Git Manually.
(line 40)
* magit-shell-command-topdir: Running Git Manually.
(line 35)
* magit-show-commit: Diffing. (line 69)
* magit-show-commit <1>: Blaming. (line 78)
* magit-show-refs: References Buffer. (line 6)
* magit-show-refs-current: References Buffer. (line 26)
* magit-show-refs-head: References Buffer. (line 21)
* magit-show-refs-other: References Buffer. (line 32)
* magit-snapshot-both: Stashing. (line 40)
* magit-snapshot-index: Stashing. (line 47)
* magit-snapshot-worktree: Stashing. (line 52)
* magit-stage: Staging and Unstaging.
(line 28)
* magit-stage-file: Staging from File-Visiting Buffers.
(line 10)
* magit-stage-file <1>: Minor Mode for Buffers Visiting Files.
(line 59)
* magit-stage-modified: Staging and Unstaging.
(line 36)
* magit-stash: Stashing. (line 8)
* magit-stash-apply: Stashing. (line 59)
* magit-stash-both: Stashing. (line 14)
* magit-stash-branch: Stashing. (line 81)
* magit-stash-branch-here: Stashing. (line 86)
* magit-stash-clear: Stashing. (line 96)
* magit-stash-drop: Stashing. (line 72)
* magit-stash-format-patch: Stashing. (line 92)
* magit-stash-index: Stashing. (line 21)
* magit-stash-keep-index: Stashing. (line 33)
* magit-stash-list: Stashing. (line 100)
* magit-stash-pop: Stashing. (line 65)
* magit-stash-show: Diffing. (line 74)
* magit-stash-show <1>: Stashing. (line 77)
* magit-stash-worktree: Stashing. (line 26)
* magit-status: Status Buffer. (line 22)
* magit-submodule: Submodule Transient. (line 6)
* magit-submodule-add: Submodule Transient. (line 20)
* magit-submodule-fetch: Fetching. (line 50)
* magit-submodule-populate: Submodule Transient. (line 34)
* magit-submodule-register: Submodule Transient. (line 27)
* magit-submodule-synchronize: Submodule Transient. (line 44)
* magit-submodule-unpopulate: Submodule Transient. (line 50)
* magit-submodule-update: Submodule Transient. (line 39)
* magit-subtree: Subtree. (line 8)
* magit-subtree-add: Subtree. (line 25)
* magit-subtree-add-commit: Subtree. (line 30)
* magit-subtree-export: Subtree. (line 42)
* magit-subtree-import: Subtree. (line 13)
* magit-subtree-merge: Subtree. (line 34)
* magit-subtree-pull: Subtree. (line 38)
* magit-subtree-push: Subtree. (line 54)
* magit-subtree-split: Subtree. (line 59)
* magit-tag: Tagging. (line 8)
* magit-tag-create: Tagging. (line 14)
* magit-tag-delete: Tagging. (line 40)
* magit-tag-prune: Tagging. (line 47)
* magit-tag-release: Tagging. (line 19)
* magit-toggle-buffer-lock: Modes and Buffers. (line 17)
* magit-toggle-margin: Refreshing Logs. (line 37)
* magit-toggle-margin <1>: Log Margin. (line 56)
* magit-toggle-margin-details: Log Margin. (line 64)
* magit-unstage: Staging and Unstaging.
(line 43)
* magit-unstage-all: Staging and Unstaging.
(line 52)
* magit-unstage-file: Staging from File-Visiting Buffers.
(line 18)
* magit-unstage-file <1>: Minor Mode for Buffers Visiting Files.
(line 63)
* magit-version: Git Executable. (line 17)
* magit-version <1>: Debugging Tools. (line 10)
* magit-visit-ref: References Buffer. (line 179)
* magit-wip-commit: Wip Modes. (line 88)
* magit-wip-log: Wip Modes. (line 48)
* magit-wip-log-current: Wip Modes. (line 57)
* magit-worktree: Worktree. (line 8)
* magit-worktree-branch: Worktree. (line 17)
* magit-worktree-checkout: Worktree. (line 13)
* magit-worktree-delete: Worktree. (line 21)
* magit-worktree-status: Worktree. (line 26)
* scroll-down: Commands Available in Diffs.
(line 60)
* scroll-up: Commands Available in Diffs.
(line 56)
* with-editor-cancel: Editing Commit Messages.
(line 24)
* with-editor-cancel <1>: Editing Rebase Sequences.
(line 11)
* with-editor-debug: Debugging Tools. (line 38)
* with-editor-finish: Editing Commit Messages.
(line 19)
* with-editor-finish <1>: Editing Rebase Sequences.
(line 6)

File: magit.info, Node: Function Index, Next: Variable Index, Prev: Command Index, Up: Top
Appendix E Function Index
*************************
[index]
* Menu:
* git-commit-check-style-conventions: Editing Commit Messages.
(line 247)
* git-commit-propertize-diff: Editing Commit Messages.
(line 206)
* git-commit-save-message: Editing Commit Messages.
(line 187)
* git-commit-setup-changelog-support: Editing Commit Messages.
(line 191)
* git-commit-turn-on-auto-fill: Editing Commit Messages.
(line 196)
* git-commit-turn-on-flyspell: Editing Commit Messages.
(line 201)
* ido-enter-magit-status: Status Buffer. (line 72)
* magit-add-section-hook: Section Hooks. (line 20)
* magit-after-save-refresh-status: Automatic Refreshing of Magit Buffers.
(line 58)
* magit-branch-or-checkout: Branch Commands. (line 257)
* magit-branch-orphan: Branch Commands. (line 252)
* magit-branch-shelve: Auxiliary Branch Commands.
(line 9)
* magit-branch-unshelve: Auxiliary Branch Commands.
(line 20)
* magit-builtin-completing-read: Support for Completion Frameworks.
(line 42)
* magit-call-git: Calling Git for Effect.
(line 28)
* magit-call-process: Calling Git for Effect.
(line 32)
* magit-cancel-section: Creating Sections. (line 71)
* magit-completing-read: Support for Completion Frameworks.
(line 60)
* magit-current-section: Section Selection. (line 6)
* magit-define-section-jumper: Creating Sections. (line 77)
* magit-diff-scope: Matching Sections. (line 118)
* magit-diff-type: Matching Sections. (line 95)
* magit-diff-visit-file-other-frame: Visiting Files and Blobs from a Diff.
(line 74)
* magit-diff-visit-file-other-window: Visiting Files and Blobs from a Diff.
(line 73)
* magit-diff-visit-worktree-file-other-frame: Visiting Files and Blobs from a Diff.
(line 76)
* magit-diff-visit-worktree-file-other-window: Visiting Files and Blobs from a Diff.
(line 75)
* magit-display-buffer: Switching Buffers. (line 6)
* magit-display-buffer-fullcolumn-most-v1: Switching Buffers. (line 76)
* magit-display-buffer-fullframe-status-topleft-v1: Switching Buffers.
(line 66)
* magit-display-buffer-fullframe-status-v1: Switching Buffers.
(line 60)
* magit-display-buffer-same-window-except-diff-v1: Switching Buffers.
(line 54)
* magit-display-buffer-traditional: Switching Buffers. (line 46)
* magit-file-checkout: Minor Mode for Buffers Visiting Files.
(line 165)
* magit-file-delete: Minor Mode for Buffers Visiting Files.
(line 157)
* magit-file-rename: Minor Mode for Buffers Visiting Files.
(line 153)
* magit-file-untrack: Minor Mode for Buffers Visiting Files.
(line 161)
* magit-find-file: General-Purpose Visit Commands.
(line 9)
* magit-find-file-other-frame: General-Purpose Visit Commands.
(line 21)
* magit-find-file-other-window: General-Purpose Visit Commands.
(line 15)
* magit-generate-buffer-name-default-function: Naming Buffers.
(line 17)
* magit-get-section: Matching Sections. (line 16)
* magit-git: Calling Git for Effect.
(line 65)
* magit-git-exit-code: Getting a Value from Git.
(line 10)
* magit-git-failure: Getting a Value from Git.
(line 19)
* magit-git-false: Getting a Value from Git.
(line 29)
* magit-git-insert: Getting a Value from Git.
(line 34)
* magit-git-items: Getting a Value from Git.
(line 49)
* magit-git-lines: Getting a Value from Git.
(line 44)
* magit-git-str: Getting a Value from Git.
(line 72)
* magit-git-string: Getting a Value from Git.
(line 38)
* magit-git-success: Getting a Value from Git.
(line 14)
* magit-git-true: Getting a Value from Git.
(line 24)
* magit-git-wash: Calling Git for Effect.
(line 70)
* magit-hunk-set-window-start: Section Movement. (line 43)
* magit-ido-completing-read: Support for Completion Frameworks.
(line 48)
* magit-insert-am-sequence: Status Sections. (line 28)
* magit-insert-assumed-unchanged-files: Status Sections. (line 117)
* magit-insert-bisect-log: Status Sections. (line 46)
* magit-insert-bisect-output: Status Sections. (line 38)
* magit-insert-bisect-rest: Status Sections. (line 42)
* magit-insert-diff-filter-header: Status Header Sections.
(line 38)
* magit-insert-error-header: Status Header Sections.
(line 28)
* magit-insert-head-branch-header: Status Header Sections.
(line 42)
* magit-insert-heading: Creating Sections. (line 42)
* magit-insert-ignored-files: Status Sections. (line 100)
* magit-insert-local-branches: References Sections. (line 17)
* magit-insert-merge-log: Status Sections. (line 18)
* magit-insert-modules: Status Module Sections.
(line 12)
* magit-insert-modules-overview: Status Module Sections.
(line 33)
* magit-insert-modules-unpulled-from-pushremote: Status Module Sections.
(line 50)
* magit-insert-modules-unpulled-from-upstream: Status Module Sections.
(line 44)
* magit-insert-modules-unpushed-to-pushremote: Status Module Sections.
(line 62)
* magit-insert-modules-unpushed-to-upstream: Status Module Sections.
(line 56)
* magit-insert-push-branch-header: Status Header Sections.
(line 51)
* magit-insert-rebase-sequence: Status Sections. (line 23)
* magit-insert-recent-commits: Status Sections. (line 131)
* magit-insert-remote-branches: References Sections. (line 21)
* magit-insert-remote-header: Status Header Sections.
(line 67)
* magit-insert-repo-header: Status Header Sections.
(line 63)
* magit-insert-section: Creating Sections. (line 6)
* magit-insert-sequencer-sequence: Status Sections. (line 33)
* magit-insert-skip-worktree-files: Status Sections. (line 110)
* magit-insert-staged-changes: Status Sections. (line 63)
* magit-insert-stashes: Status Sections. (line 67)
* magit-insert-status-headers: Status Header Sections.
(line 12)
* magit-insert-submodules: Listing Submodules. (line 35)
* magit-insert-tags: References Sections. (line 25)
* magit-insert-tags-header: Status Header Sections.
(line 56)
* magit-insert-tracked-files: Status Sections. (line 96)
* magit-insert-unpulled-cherries: Status Sections. (line 142)
* magit-insert-unpulled-from-pushremote: Status Sections. (line 79)
* magit-insert-unpulled-from-upstream: Status Sections. (line 74)
* magit-insert-unpulled-or-recent-commits: Status Sections. (line 124)
* magit-insert-unpushed-cherries: Status Sections. (line 149)
* magit-insert-unpushed-to-pushremote: Status Sections. (line 89)
* magit-insert-unpushed-to-upstream: Status Sections. (line 84)
* magit-insert-unstaged-changes: Status Sections. (line 59)
* magit-insert-untracked-files: Status Sections. (line 50)
* magit-insert-upstream-branch-header: Status Header Sections.
(line 46)
* magit-insert-user-header: Status Header Sections.
(line 75)
* magit-list-repositories: Repository List. (line 6)
* magit-list-submodules: Listing Submodules. (line 13)
* magit-log-maybe-show-more-commits: Section Movement. (line 57)
* magit-log-maybe-update-blob-buffer: Section Movement. (line 71)
* magit-log-maybe-update-revision-buffer: Section Movement. (line 64)
* magit-maybe-set-dedicated: Switching Buffers. (line 101)
* magit-mode-display-buffer: Refreshing Buffers. (line 33)
* magit-mode-quit-window: Quitting Windows. (line 34)
* magit-mode-setup: Refreshing Buffers. (line 17)
* magit-push-implicitly: Pushing. (line 74)
* magit-push-to-remote: Pushing. (line 85)
* magit-region-sections: Section Selection. (line 10)
* magit-region-values: Section Selection. (line 37)
* magit-repolist-column-ident: Repository List. (line 30)
* magit-repolist-column-path: Repository List. (line 35)
* magit-repolist-column-unpulled-from-pushremote: Repository List.
(line 49)
* magit-repolist-column-unpulled-from-upstream: Repository List.
(line 44)
* magit-repolist-column-unpushed-to-pushremote: Repository List.
(line 59)
* magit-repolist-column-unpushed-to-upstream: Repository List.
(line 54)
* magit-repolist-column-version: Repository List. (line 39)
* magit-restore-window-configuration: Quitting Windows. (line 23)
* magit-revert-buffers: Editing Commit Messages.
(line 178)
* magit-run-git: Calling Git for Effect.
(line 36)
* magit-run-git-async: Calling Git for Effect.
(line 80)
* magit-run-git-with-editor: Calling Git for Effect.
(line 93)
* magit-run-git-with-input: Calling Git for Effect.
(line 40)
* magit-run-git-with-logfile: Calling Git for Effect.
(line 56)
* magit-save-window-configuration: Switching Buffers. (line 90)
* magit-section-case: Matching Sections. (line 71)
* magit-section-hide: Section Visibility. (line 49)
* magit-section-hide-children: Section Visibility. (line 64)
* magit-section-ident: Matching Sections. (line 11)
* magit-section-match: Matching Sections. (line 21)
* magit-section-set-window-start: Section Movement. (line 50)
* magit-section-show: Section Visibility. (line 45)
* magit-section-show-children: Section Visibility. (line 58)
* magit-section-show-headings: Section Visibility. (line 53)
* magit-section-toggle-children: Section Visibility. (line 68)
* magit-section-value-if: Matching Sections. (line 61)
* magit-start-git: Calling Git for Effect.
(line 105)
* magit-start-process: Calling Git for Effect.
(line 124)
* magit-status-maybe-update-blob-buffer: Section Movement. (line 83)
* magit-status-maybe-update-revision-buffer: Section Movement.
(line 77)
* magit-wip-log: Wip Modes. (line 48)
* magit-wip-log-current: Wip Modes. (line 57)
* with-editor-usage-message: Editing Commit Messages.
(line 215)

File: magit.info, Node: Variable Index, Prev: Function Index, Up: Top
Appendix F Variable Index
*************************
[index]
* Menu:
* auto-revert-buffer-list-filter: Automatic Reverting of File-Visiting Buffers.
(line 81)
* auto-revert-interval: Automatic Reverting of File-Visiting Buffers.
(line 76)
* auto-revert-mode: Automatic Reverting of File-Visiting Buffers.
(line 62)
* auto-revert-stop-on-user-input: Automatic Reverting of File-Visiting Buffers.
(line 71)
* auto-revert-use-notify: Automatic Reverting of File-Visiting Buffers.
(line 49)
* auto-revert-verbose: Automatic Reverting of File-Visiting Buffers.
(line 103)
* branch.autoSetupMerge: Branch Git Variables.
(line 81)
* branch.autoSetupRebase: Branch Git Variables.
(line 98)
* branch.NAME.description: Branch Git Variables.
(line 48)
* branch.NAME.merge: Branch Git Variables.
(line 10)
* branch.NAME.pushRemote: Branch Git Variables.
(line 34)
* branch.NAME.rebase: Branch Git Variables.
(line 22)
* branch.NAME.remote: Branch Git Variables.
(line 16)
* core.notesRef: Notes. (line 60)
* git-commit-fill-column: Editing Commit Messages.
(line 228)
* git-commit-finish-query-functions: Editing Commit Messages.
(line 233)
* git-commit-known-pseudo-headers: Editing Commit Messages.
(line 124)
* git-commit-major-mode: Editing Commit Messages.
(line 163)
* git-commit-setup-hook: Editing Commit Messages.
(line 174)
* git-commit-summary-max-length: Editing Commit Messages.
(line 222)
* git-rebase-auto-advance: Editing Rebase Sequences.
(line 99)
* git-rebase-confirm-cancel: Editing Rebase Sequences.
(line 107)
* git-rebase-show-instructions: Editing Rebase Sequences.
(line 103)
* global-auto-revert-mode: Automatic Reverting of File-Visiting Buffers.
(line 22)
* global-magit-file-mode: Minor Mode for Buffers Visiting Files.
(line 13)
* magit-auto-revert-immediately: Automatic Reverting of File-Visiting Buffers.
(line 32)
* magit-auto-revert-mode: Automatic Reverting of File-Visiting Buffers.
(line 17)
* magit-auto-revert-tracked-only: Automatic Reverting of File-Visiting Buffers.
(line 55)
* magit-bisect-show-graph: Bisecting. (line 55)
* magit-blame-disable-modes: Blaming. (line 168)
* magit-blame-echo-style: Blaming. (line 151)
* magit-blame-goto-chunk-hook: Blaming. (line 174)
* magit-blame-read-only: Blaming. (line 163)
* magit-blame-styles: Blaming. (line 146)
* magit-blame-time-format: Blaming. (line 158)
* magit-branch-adjust-remote-upstream-alist: Branch Commands. (line 210)
* magit-branch-direct-configure: Branch Commands. (line 20)
* magit-branch-prefer-remote-upstream: Branch Commands. (line 165)
* magit-branch-read-upstream-first: Branch Commands. (line 159)
* magit-buffer-name-format: Naming Buffers. (line 27)
* magit-bury-buffer-function: Quitting Windows. (line 14)
* magit-cherry-margin: Cherries. (line 22)
* magit-clone-always-transient: Cloning Repository. (line 12)
* magit-clone-default-directory: Cloning Repository. (line 90)
* magit-clone-name-alist: Cloning Repository. (line 103)
* magit-clone-set-remote-head: Cloning Repository. (line 68)
* magit-clone-set-remote.pushDefault: Cloning Repository. (line 78)
* magit-clone-url-format: Cloning Repository. (line 124)
* magit-commit-ask-to-stage: Initiating a Commit. (line 75)
* magit-commit-extend-override-date: Initiating a Commit. (line 80)
* magit-commit-reword-override-date: Initiating a Commit. (line 84)
* magit-commit-squash-confirm: Initiating a Commit. (line 88)
* magit-completing-read-function: Support for Completion Frameworks.
(line 27)
* magit-diff-adjust-tab-width: Diff Options. (line 21)
* magit-diff-buffer-file-locked: Minor Mode for Buffers Visiting Files.
(line 91)
* magit-diff-hide-trailing-cr-characters: Diff Options. (line 90)
* magit-diff-highlight-hunk-region-functions: Diff Options. (line 94)
* magit-diff-highlight-indentation: Diff Options. (line 75)
* magit-diff-highlight-trailing: Diff Options. (line 70)
* magit-diff-paint-whitespace: Diff Options. (line 43)
* magit-diff-paint-whitespace-lines: Diff Options. (line 60)
* magit-diff-refine-hunk: Diff Options. (line 6)
* magit-diff-refine-ignore-whitespace: Diff Options. (line 16)
* magit-diff-unmarked-lines-keep-foreground: Diff Options. (line 120)
* magit-diff-visit-previous-blob: Visiting Files and Blobs from a Diff.
(line 39)
* magit-direct-use-buffer-arguments: Transient Arguments and Buffer Variables.
(line 73)
* magit-display-buffer-function: Switching Buffers. (line 27)
* magit-display-buffer-noselect: Switching Buffers. (line 18)
* magit-dwim-selection: Completion and Confirmation.
(line 42)
* magit-ediff-dwim-show-on-hunks: Ediffing. (line 73)
* magit-ediff-quit-hook: Ediffing. (line 88)
* magit-ediff-show-stash-with-index: Ediffing. (line 81)
* magit-file-mode-map: Minor Mode for Buffers Visiting Files.
(line 20)
* magit-generate-buffer-name-function: Naming Buffers. (line 6)
* magit-git-debug: Viewing Git Output. (line 28)
* magit-git-debug <1>: Getting a Value from Git.
(line 64)
* magit-git-executable: Git Executable. (line 39)
* magit-git-global-arguments: Global Git Arguments.
(line 6)
* magit-keep-region-overlay: The Selection. (line 52)
* magit-list-refs-sortby: Additional Completion Options.
(line 6)
* magit-log-auto-more: Log Buffer. (line 69)
* magit-log-buffer-file-locked: Minor Mode for Buffers Visiting Files.
(line 118)
* magit-log-margin: Log Margin. (line 12)
* magit-log-section-args: Status Options. (line 36)
* magit-log-section-commit-count: Status Sections. (line 136)
* magit-log-select-margin: Select from Log. (line 30)
* magit-log-show-refname-after-summary: Log Buffer. (line 75)
* magit-log-trace-definition-function: Commands Available in Diffs.
(line 18)
* magit-module-sections-hook: Status Module Sections.
(line 20)
* magit-module-sections-nested: Status Module Sections.
(line 24)
* magit-no-confirm: Action Confirmation. (line 18)
* magit-pop-revision-stack-format: Editing Commit Messages.
(line 92)
* magit-post-display-buffer-hook: Switching Buffers. (line 96)
* magit-pre-display-buffer-hook: Switching Buffers. (line 85)
* magit-prefer-remote-upstream: Branch Git Variables.
(line 126)
* magit-prefix-use-buffer-arguments: Transient Arguments and Buffer Variables.
(line 64)
* magit-process-raise-error: Calling Git for Effect.
(line 151)
* magit-pull-or-fetch: Fetching. (line 55)
* magit-reflog-margin: Reflog. (line 23)
* magit-refresh-args: Refreshing Buffers. (line 55)
* magit-refresh-buffer-hook: Automatic Refreshing of Magit Buffers.
(line 42)
* magit-refresh-function: Refreshing Buffers. (line 49)
* magit-refresh-status-buffer: Automatic Refreshing of Magit Buffers.
(line 48)
* magit-refs-filter-alist: References Buffer. (line 157)
* magit-refs-focus-column-width: References Buffer. (line 82)
* magit-refs-margin: References Buffer. (line 97)
* magit-refs-margin-for-tags: References Buffer. (line 123)
* magit-refs-pad-commit-counts: References Buffer. (line 49)
* magit-refs-primary-column-width: References Buffer. (line 69)
* magit-refs-sections-hook: References Sections. (line 13)
* magit-refs-show-commit-count: References Buffer. (line 37)
* magit-refs-show-remote-prefix: References Buffer. (line 62)
* magit-remote-add-set-remote.pushDefault: Remote Commands. (line 92)
* magit-remote-direct-configure: Remote Commands. (line 21)
* magit-remote-set-if-missing: Remote Git Variables.
(line 39)
* magit-repolist-columns: Repository List. (line 14)
* magit-repository-directories: Status Buffer. (line 58)
* magit-revision-filter-files-on-follow: Revision Buffer. (line 64)
* magit-revision-insert-related-refs: Revision Buffer. (line 6)
* magit-revision-show-gravatars: Revision Buffer. (line 19)
* magit-revision-use-hash-sections: Revision Buffer. (line 36)
* magit-root-section: Matching Sections. (line 87)
* magit-save-repository-buffers: Automatic Saving of File-Visiting Buffers.
(line 13)
* magit-section-cache-visibility: Section Visibility. (line 95)
* magit-section-initial-visibility-alist: Section Visibility. (line 78)
* magit-section-movement-hook: Section Movement. (line 38)
* magit-section-set-visibility-hook: Section Visibility. (line 106)
* magit-section-show-child-count: Section Options. (line 9)
* magit-section-visibility-indicator: Section Visibility. (line 124)
* magit-shell-command-verbose-prompt: Running Git Manually.
(line 47)
* magit-stashes-margin: Stashing. (line 104)
* magit-status-headers-hook: Status Header Sections.
(line 18)
* magit-status-margin: Status Options. (line 10)
* magit-status-refresh-hook: Status Options. (line 6)
* magit-status-sections-hook: Status Sections. (line 10)
* magit-submodule-list-columns: Listing Submodules. (line 21)
* magit-this-process: Calling Git for Effect.
(line 146)
* magit-uniquify-buffer-names: Naming Buffers. (line 74)
* magit-unstage-committed: Staging and Unstaging.
(line 56)
* magit-update-other-window-delay: Section Movement. (line 89)
* magit-visit-ref-behavior: References Buffer. (line 190)
* magit-wip-after-apply-mode: Legacy Wip Modes. (line 19)
* magit-wip-after-apply-mode-lighter: Legacy Wip Modes. (line 59)
* magit-wip-after-save-local-mode-lighter: Legacy Wip Modes. (line 55)
* magit-wip-after-save-mode: Legacy Wip Modes. (line 13)
* magit-wip-before-change-mode: Legacy Wip Modes. (line 33)
* magit-wip-before-change-mode-lighter: Legacy Wip Modes. (line 63)
* magit-wip-initial-backup-mode: Legacy Wip Modes. (line 38)
* magit-wip-initial-backup-mode-lighter: Legacy Wip Modes. (line 67)
* magit-wip-merge-branch: Wip Graph. (line 6)
* magit-wip-mode: Wip Modes. (line 30)
* magit-wip-mode-lighter: Wip Modes. (line 104)
* magit-wip-namespace: Wip Modes. (line 96)
* notes.displayRef: Notes. (line 65)
* pull.rebase: Branch Git Variables.
(line 57)
* remote.NAME.fetch: Remote Git Variables.
(line 15)
* remote.NAME.push: Remote Git Variables.
(line 26)
* remote.NAME.pushurl: Remote Git Variables.
(line 20)
* remote.NAME.tagOpts: Remote Git Variables.
(line 31)
* remote.NAME.url: Remote Git Variables.
(line 10)
* remote.pushDefault: Branch Git Variables.
(line 71)